Keep Bad Stuff Out with Seals-It Products

You’re trusting a few seals to keep water, crud, and other bad stuff away from your engine, suspension, driveline, and even the interior. We suggest investing a little extra coin and use seals from Seals-It. Seals-It products protect expensive parts on everything from NASCAR race cars to off-roaders, construction equipment, even aircraft—applications where failure due to a bad seal is not an option.

Seals-It uses 3D prototyping and printing to develop new parts and update existing ones. This reduces time and cost so you get better products that won’t break the bank.

Summit Racing carries all sorts of Seals-It products including these—because seal failure isn’t an option for you, either.

Firewall Grommet Seals
Seals-It Firewall Grommet Seals are ideal for passing wiring, hose, hard line, throttle cable, etc. through the firewall into your interior. Made from a fireproof nitrile rubber material bonded to an aluminum bezel, the seals are designed to stretch to let components pass through, then spring back into place to seal tightly. That helps prevent damage from abrasion or chafing while keeping dust and fumes out of the cockpit.

Seals-It Firewall Grommet Seals are available as one-piece push-through or two-piece split grommets designed for use with existing hose, line, or wiring.

RODOBAL Rod End Dust Boots
Seals-It RODOBAL Dust Boots completely isolate the rod ends in your suspension and steering from dirt, water, and other types of contaminants. The rubber boots form an external cover around the rod end while the seal keeps corrosive elements from getting inside of the rod end and potentially binding it. The RODOBAL Dust Boots can handle temperatures from -40 to 300 degrees F and won’t split, crack, or fade.

Axle Seals
Seals-It Axle Seals are designed to keep gear oil inside the center section and dirt out. That prevents oil starvation of the ring and pinion gears and possible differential seizure.

Summit Racing carries two types of Seals-It Axle Seals:

Economy Series axle seals are designed for use in factory-style axle housings. They feature a redesigned inner lip that tightly grips the inside of the axle tube to create a strong seal. The Economy Series axle seals can be used on either end or both ends of the axle tube.

AS Series axle seals are made from billet aluminum. They use three O-rings to create a tight seal on the axle tube. Two bonded, heavy-duty neoprene inner seals are designed to compensate for any amount of axle shaft runout. AS Series axle seals are rebuildable and are strongly recommended for use with aftermarket axle housings.

Sealflex Elastomer Rod Ends
Sealflex Elastomer Rod Ends feature a unique molded and bonded construction that eliminates metal-to-metal contact. That allows the rod ends to absorb harshness and vibration and also compensate for misalignment without bindings. That means quieter operation and better suspension response compared to traditional rod ends. The Sealflex rod ends are available in 3/4-16, 5/8-18, and 1/2-20 RH thread sizes.

Summit Racing also carries these Seals-It products:
• Rod end seals and dust boots
• Axle seal rebuild kits
• Gauge vibration isolators
• Mechanical fuel pump seals
• Torque tube and torque ball seals for Sprint Cars

CHECK OUT OUR SELECTION OF SEALS-IT PRODUCTS