Light Up Everything with a Denali Electronics D-Series LED Light Kit

Denali Electronics’ D-Series LED Light Kits are packed with features that make them Ideal for dirt bikes, ATVs/UTVs, side-by-sides, Jeeps, and trucks—even snowmobiles. Take a look:

Hi-Intensity Cree LED Chips feature a redesigned primary optic to maximize light output through secondary optics. They produce 20% more light output without increasing power draw.

TriOptic Lens System gives you multiple beam options in one kit. The spot lenses have an official E-Mark certification that allows you to use them on the street without diminishing effectiveness off-road.

LiveActive Intelligent Thermal Management features LED drivers and heat sinks to manage heat levels in real time, ensuring your lights stay cool enough to maintain the maximum light output when you need it most.

HotSwap Wiring Harness features high-quality waterproof components and lets you swap from the kits’ standard single-intensity relay to the optional dual-intensity DataDim Controller. DataDim lets you switch between half- and full-intensity light using your vehicle's high beam switch.

Dry-Seal Construction encases the wires in a potted cavity as they enter the light housing. This ensures the housings are 100% watertight even when submerged underwater with the wires cut and connector removed.

Impact Polycarbonate Bezels are molded in 100% polycarbonate to create a surface that won't rust, fade, or corrode, even after taking repeated impacts from rocks and debris.

The Denali Electronics D-Series Light Kits come with two hinge-type light mounts, a waterproof illuminated switch, and handlebar mounts for 7/8 and one inch diameter handlebars for bikes. The D-Series lights are also available individually.

D4 LED Light Kit
The D4 kit features two lights that provide 8,750 lumens of light output. The 3.9 inch square lights have eight LEDs and a hybrid lens that provides a super-wide, close-range flood and a piercing spot beam in one housing. Swap the hybrid lenses for the included spot beam lenses and you’ll have lights that can project a massive beam 800 feet down the trail.

D7 LED Light Kit
Putting out 15,000 lumens of light, the Denali Electronics D7 LED Light Kit will outshine fourteen of Denali’s D2 lights and produce more than twice the light output of the D4 lights. The 4.4 inch diameter round lights feature 14 LEDs focused through a single-piece optic engineered to create a full-bodied spot beam reaching over 1,500 feet.

D2 LED Light Kit
The D2 LED Light Kits feature 2.2 inch diameter lights with two LEDs that put out 2,190 lumens of light. They are fitted with spot lenses that project a beam of light 525 feet down the trail or highway. Snap on the included flood lenses and you’ll get light beams 165 feet wide—perfect for seeing what’s crawling around beside you.

DR1 LED Light Kit
The DR1 kit is ideal for night riding where maximum light beam distance is critical. The 3.7 inch diameter lights have two LEDs, are rated at 2,190 lumens of light output, and have an oversized reflector that creates an industry-leading 1,000-foot spot beam. You can swap the spot lenses for the included True-Hybrid lenses to create a light beam with a more balanced combination of distance and width.

We also carry Denali Electronics LED backup lights; fender light pods for motorcycles; SoundBomb air horns; light mounts; and wiring adapters.

SEE DENALI ELECTRONICS LIGHT KITS AND ACCESSORIES AT SUMMIT RACING