Make Big Horsepower with Summit Racing 2700 Series 92mm Turbochargers

What’s new in the Summit Racing™ Performance Turbocharger universe? Well, we added two new 2700 Series ‘Giant Slayer’ S492 turbos with 92mm compressor wheels that make big horsepower.

Like our other 2700 Series turbochargers, the 92mm Giant Slayers are designed, machined and precision assembled in North America. They feature 3-D milled, 2618 billet forged compressor wheels for superior flow and dependability at high boost levels. The turbos also have 360-degree thrust bearings to improve durability at high-boost shaft speeds, plus a larger V2 race cover so the compressor side isn’t starved for air.

Available in T4 and T6 styles, the Giant Slayer 92mm turbos have an oversized 103mm turbine wheel. In fact, the T4 version is our highest mass-flowing T4-style turbo. Its special turbine housing and compact design was developed for people looking for easy four-digit, eight-second horsepower out of their present T4 turbo kits.

The T4 Giant Slayer is rated at 1,150 to 1,450 rear-wheel horsepower and the T6 turbo at 1,300 to 1,550 rear-wheel horsepower. Your exact horsepower figure may vary depending on engine modifications, transmission type, converter stall speed, and other factors.

We added a Turbocharger Specifications Chart that covers all of our 2600 and 2700 Series turbos. The chart includes horsepower ratings baselined on a drivetrain combination popular with many drag racers—a GM LS engine from 5.3L to 6.0L of displacement with stock-style cylinder heads backed by a TH-400 automatic transmission with a non-lockup torque converter. 

If you have a similar combination, we’re confident you can make horsepower in the ranges the chart specifies. Even if you run a totally different drivetrain setup, the ratings are very useful when comparing one Summit Racing Performance Turbo with another.

We’ve also created a Turbo System Components Chart to help take some of the hassle out of piecing together the hot and cold sides of your turbo setup. It lists Summit Racing brand components for T4, T6, and V-band style turbos including:
• Downpipe flange and clamp adapters
• Compressor outlet flange/clamps
• V-band to slip-fit adapters
• Intake/exhaust transition tubing
• Hot side build kits (T4 and T6 only)
• Piston and diaphragm-style wastegates, blowoff valves, and boost control solenoid 
• Turbine flanges (T4 and T6 only)
• GM LS turbo manifold for T4 turbos
• V-band to T4 flange adapters

The Turbocharger Specifications and Turbo System Components charts are listed under the “Instructions & Calculators” tab for each Summit Racing Performance Turbocharger listed on our website.

CHECK OUR OUR SUMMIT RACING 2700 SERIES 92MM TURBOCHARGERS