Turn Up the Wick on Your EcoBoost-Powered F-150 or Raptor with AMS Performance

AMS Performance makes intercoolers, turbo and fuel system upgrades, cold air intakes, and other performance parts for cars like the Subaru WRX/STI, Mitsubishi EVO, and Nissan GTR. It also makes hop-up parts you owners of 2015-21 Ford F-150 and Raptor pickups with the 3.5L EcoBoost should take a look at. They replace the OEM components and improve the turbo system’s efficiency to boost horsepower and torque. What you use that extra power for is up to you.

EcoBoost Intercooler
The AMS Performance EcoBoost intercooler has a massive 21 x 10.25 x 5.5 inch core—more than twice the size of the factory unit—to drop intake charge temperatures near 45 degrees F. Watch this AMS Performance video to see the proof.

Features include:
• Bar and plate construction
• Relocates the factory blowoff valve to the lowest point of the intercooler
• Uses factory intercooler top and bottom mounting locations, brackets, and air ducting
• No cutting or trimming needed for installation
• No drain holes required

Turbo Inlet Tubes
The AMS Performance Turbo Inlet Tubes are the only upgrade of their kind on the market. They hves a 222% larger cross-sectional area compared to the bottlenecked section of the factory inlet tubes. Eliminating the air restriction means less pressure drop and more equal side-to-side pressure at the turbo inlets; AMS Performance says the tubes can add 20 horsepower with proper tuning.

The Turbo Inlet Tubes are compatible with OEM and most aftermarket air intake boxes, retain the OEM fittings (no check engine light!) and come with all necessary installation hardware.

Catted Street Downpipe Kit
Your EcoBoost F-150’s factory downpipes are extremely restrictive, which can throttle your turbos by creating too much backpressure. The AMS Performance Catted Street Downpipe eliminates that restriction to increase exhaust flow and allow the turbos to spool faster. The stainless steel downpipes have a 24.7% larger cross-sectional area at the inlet—the largest on the market—and provide a smooth transition from the OEM turbo outlet to three inch diameter exhaust tubing.

Other features include 49-state-legal catalytic converters, chamfered mounting flanges to evenly distribute clamping force, and a raised outlet to increase clearance between the crossmembers. The Catted Street Downpipe Kit will not fit Raptor trucks.

Turbine Housing Adapter
The AMS Performance Turbine Housing Adapter fits between the turbo and the downpipe. With a wider mouth and nearly 55% more internal cross-sectional area, it provides a smooth transition and increased exhaust gas flow out of the turbo. That reduces backpressure and allows the turbo to spool faster—and that means more power and better response. The Turbine Housing Adapter is CNC-machined from 304 stainless steel and fits the OEM gasket size.