Kit/Combo Contents

DX Engineering DXE-MBVE-5AEBASE - DX Engineering MBVE-5A/AE Series SAF-T-TILT™ Vertical Antenna Components

Extended Base Tube, 36 in. plus Insulator, Component of SAF-T-TILT™ MBVE-5AE Series Vertical Antenna, Set

Kit Item Quantity: 1

DX Engineering DXE-MBVE-5ATOP - DX Engineering MBVE-5A/AE Series SAF-T-TILT™ Vertical Antenna Components

Antenna Top Tube Components, SAF-T-TILT™ Tilt Base and Manual for all MBVE-5A and MBVE-5AE Series, Includes Clamps + Hardware

Kit Item Quantity: 1

DX Engineering DXE-MBVE-THW - DX Engineering Remote Tuner Hardware Mounting Kits

Tuner Mounting Hardware and Wire Assembly for MFJ-993BRT or 994BRT on MBVE Antenna, Hardware Only, Kit

Kit Item Quantity: 1

DX Engineering DXE-RADP-1HWK - DX Engineering Radial Plate Wire Attachment Hardware Kits

Radial Plate Wire Attachment Hardware Kit, Stainless Steel, 1/4-20 in. Thread Size, 1.00 in. Bolt Length, Kit

Kit Item Quantity: 1

DX Engineering DXE-RADP-3 - DX Engineering Radial Plates

Radial Plate, Stainless Steel, 1/8 x 11 5/8 in. sq., Pre-drilled, 60 holes, Includes 20 sets SS Hdwr., Each

Kit Item Quantity: 1

DX Engineering DXE-SSVC-2P - DX Engineering Saddle Clamps

Saddle Clamp, V-bolt Type, Stainless Steel, Natural, 1.0 in. - 2.0 in. Size, Each

Kit Item Quantity: 1

MFJ MFJ-993BRT - MFJ 993BRT IntelliTuner™ Remote Automatic Antenna Tuners

Antenna Tuner, IntelliTuner™, Automatic, Remote Location, 300 watts, 160-10 meters, Internal, Each

Kit Item Quantity: 1

Overview

DX Engineering MBVE-5AE Series SAF-T-TILT™ Auto-Tune HF Multi-Band Vertical Antennas

DX Engineering MBVE-5AE Series SAF-T-TILT™ Auto-Tune HF Multi-Band Vertical Antennas are high performance, 80 through 10 meter vertical antenna systems. They are designed from the ground up to offer ease of use, reliability and performance! New design and materials technology are used throughout. The patented* and massive SAF-T-TILT™ 3/8 in. thick rugged aluminum base allows easy, safe tilt action without the unsafe removal of mounting hardware -- as with some competitors' antennas! Plus, these self-supporting HF vertical antennas, at just over 40 ft. in height, feature DX Engineering's exclusive new mounting brackets that secure the automatic antenna tuner above the tilt base for easy installation and access, away from potential damage by water and animals.

Using our MBVE-5AE Series SAF-T-TILT™ Auto-Tune ground-mounted vertical, you'll work DX as you never could with a low, horizontal dipole antenna! If you have a location that is limited by HOA or CC&R restrictions, where a tower isn't possible or if there are no trees for wire antenna supports, these slender, unobtrusive HF Multi-Band Vertical Antennas can opens up a new world of HF operations.

Click on the DOCUMENTATION tab in any of the antennas listed below and then click on the CHARTS and GUIDES link to see all of the MBVE-5AE Auto-Tune Vertical Antenna offerings. Some of these antenna packages include the tuner and some include tuner mounting brackets and hardware only, for those who already own that tuner. All antenna packages include the antenna tuner mount, antenna element tubing with insulator, exclusive, patented* SAF-T-TILT™ Base Antenna Mount, stainless steel hardware and clamps.

If you already have a DX Engineering MBVE-5 or MBVE-5A antenna, then use our MBVE-5UG series Upgrade Kits to add an extension tube, elevated tuner mount and auto-tuner. Search MBVE-5UG above.

This all-new series of MBVE-5AE SAF-T-TILT™ Auto-Tune HF Multi-Band Vertical Antennas feature:

* Massive, patented* SAF-T-TILT™ base allows safe raising and lowering of antenna without removal of fastening hardware
* High strength Delrin® thermoplastic insulator that won't crack, splinter, peel or fail from exposure
* Rugged structural grade type 6063-T832 drawn aluminum tubing radiator - the best alloy for high-strength, long-lasting antenna applications plus an extended tubing, brackets and hardware for tuner mounting
* The fast taper antenna element provides the lowest wind resistance- very durable and attractive
* Free-standing to 92 mph wind speeds

Like any HF vertical, MBVE-5AE verticals require a good ground radial system. We highly recommend installing 32 radials, 65 ft. long are recommended. Fewer or shorter radials will work, but with some diminished results. A great ground-mounted vertical has the available space covered with 20 or more evenly spaced radials, each of any length from 15 to 65 ft. Do the work and you'll work the world! ™

For proper installation, additional materials are needed, but not supplied. You will need:

* Mounting pipe--steel pipe that has 2.0 in. O.D. with 0.25 in. wall thickness, 4 ft. long -- standard 1-1/2 in. galvanized water pipe (with its 1.9 in. OD) is fine
* Quick-Set or other concrete for mounting pipe installation
* Radial wire and wire lugs--must use 14-gauge, stranded copper wire with PVC insulation.
* Jet Lube SS-30 Anti-oxidant Anti-Seize –model JTL-12555 is highly recommended to ensure good connection between aluminum hardware and in-between aluminum tubing sections and for use on the threads of all the stainless steel hardware to prevent galling

Note: For additional information, please look at the files under the "Documentation" tab.

DX Engineering MBVE-5AE Series SAF-T-TILT™ Auto-Tune HF Multi-Band Vertical Antennas are high-performance verticals and antenna packages that allow you to access almost all HF bands with only one antenna solution.

*US Patents D654,063 and D654,064

Documentation

Reviews Write a Review