ICOM IC-9700 VHF/UHF/1.2 GHz Transceiver IC-9700-OB

Write the First Review

Part Number: ICO-IC-9700-OB

Not Available

Open Box - VHF/UHF/1.2GHZ SDR TRANSCEIVER
See More Specifications

ICOM IC-9700 VHF/UHF/1.2 GHz Transceiver IC-9700-OB

ICOM IC-9700 VHF/UHF/1.2 GHz Transceiver IC-9700-OB

ICO-IC-9700-OB

Not Yet Reviewed

Part Number: ICO-IC-9700-OB

Not Available

Overview

ICOM IC-9700 VHF/UHF/1.2 GHz All Mode Base Transceiver

Specifically built for the VHF/UHF weak signal operator in mind, the IC-9700 is a RF direct sampling receiver for 2m and 70cm, with a single, down conversion for 23cm with an IF Sampled receiver between 311 – 371MHz. This design provides a quiet receiver with the power of Icom’s DSP technology along with a robust PA providing 100W on 2m, 75W on 70cm, and 10W on 23cm.

ICOM IC-9700

IC-9700 Band Management includes band specific memory channels and band specific receiver and transmitter settings. For transmit, users can make adjustments to RF power, TX power Limit, Limit Power and TX Delay by band. Basic receiver settings, like the Noise Blanker, Noise Reduction and others can be tweaked by band with a dynamic Notch and Filter may also be setup by band and mode.

Features for the ultra-advanced Icom IC-9700 include:* Direct-Sampling SDR design* RF Output of 100 Watts on 2m (144-148 MHz), 75 Watts on 70cm (430-450 MHz) and 10 Watts on 23 cm (1240-1300 MHz)* All modes including FM, SSB, AM, CW, RTTY, Digital, D-Star Digital Voice and Digital Data* Digital Data (DD) mode provides 128 kbps data communication* D-STAR Terminal and Access Point mode (RS-MS3A/W)* Dual D-STAR receive (decodes two voice streams simultaneously) * Main and Sub RX* Full Duplex (no V/V or U/U Capability)* Smooth satellite operations with normal/reverse tracking and 99 satellite channels* Supports 2 wave simultaneous reception (different bands/same or different mode)* High definition Real-Time 4.3 inch TFT display* Touchscreen interface (LCD touch-screen control)* Main or Sub-Band Scope (Center/Fix mode +/-500 kHz Center Mode)* Audio Scope* CW full break-in* 0.5ppm frequency stability < +/- 0.5ppm (–10°C to +60°C; 14°F to 140°F) * Voice Recording/playback function (SD Memory Card)* Ethernet Port - Internal Server for Internet remote control with optional RS-BA1 software* USB audio and control connection* DR Memories: 2,500* Antenna connectors: 2m SO-239, 70cm Type N, 1.2 GHz Type NExplore new horizons and space communications with the ICOM IC-9700 VHF/UHF/1.2 GHz Transceiver.

ICOM IC-9700

ICOM IC-9700

ICOM IC-9700 VHF/UHF All-Mode Transceiver

Specifications

Brand:
Manufacturer's Part Number:
IC-9700-OB
Part Type:
Product Line:
DXE Part Number:
ICO-IC-9700-OB
FCC License Required to Transmit:
Yes
Internal HF Antenna Tuner:
No
Receive Range 1:
144.000-148.000 MHz
Receive Range 2:
430.000-450.000 MHz
Receive Range 3:
1,240.000-1,300.000 MHz
Receive System:
Dual receiver
Dual Watch:
Yes
Roofing Filter Capability:
No
Transceiver Power Supply:
External, not included
Transceiver Input Voltage:
13.8 Vdc
Transceiver Maximum Current:
20.0 A
Antenna Ports:
3
Dedicated Receive Antenna Input:
No
Computer Connection Type:
USB or CI-V interface
Digital Mode Audio Input/Output:
USB or 8-pin DIN
External Display Capability:
No
Voice Synthesizer Capability:
No
Hand Microphone Included:
Yes
Radio Width:
9.450 in.
Radio Height:
3.700 in.
Radio Depth:
9.370 in.
Weight:
10.400 lbs.
Quantity:
Sold individually.
Notes:
Specifications subject to change without notice.
Special Attention:
This is an OPEN-BOX version of ICO-IC-9700 and may be blemished or missing hardware.
Product Condition:
Open Box
Band Agility:
Tri-band

Documentation

Instruction Sheets for Part Number ICO-IC-9700-OB

 Loading...
 Loading...

Reviews Write a Review

Some parts are not legal for use in California or other states with similar laws / regulations

Modal Header

Call To Order

This is a custom order part. You can order this part by Contacting Us.

CA Warning Icon

Cancer and Reproductive Harm -- www.P65Warnings.ca.gov

Email this page