Kit/Combo Contents

DX Engineering DXE-MC20-1-1 - DX Engineering Maxi-Core® 20 Baluns and Feedline Chokes

Maxi-Core® 20 Current Choke Balun, 1:1, 5 kW, Use on 50 ohm Feedpoint Antennas, High Common Mode Impedance, Each

Kit Item Quantity: 1

DX Engineering DXE-MC20K-BRKT - DX Engineering Balun or Choke Mounting Plate and Bracket Kits

Mounting Plate and Bracket for MC20 or Comtek Baluns and Chokes, Pre-drilled Poly-Resin Plate, SS Bracket, w/Hdwr., Requires Optional V-Clamp, Kit

Kit Item Quantity: 1

Overview

DX Engineering Maxi-Core® 20 1:1 Balun and Mount Kits

DX Engineering Maxi-Core® 20 1:1 Balun and Mount Kits, DXE-MC20-1-1BM, provide current balance and feedline isolation for HF through 6 meter verticals, rotatable dipoles, directional beams and Yagi antennas. Intended for 50 ohm feedpoint antennas that offer low SWR, this combination of mounting plate bracket and effective 1:1 RF choke balun handles full-legal-power-plus and provides higher common mode impedance (CMI) across a greater frequency range than competing balun models and previous DX Engineering and Comtek models. Their high CMI across the AM Broadcast band and the HF/6M spectrum is essential to provide sufficient suppression of unwanted transmitted and received RFI/BCI current on the feedline shield exterior. With less noise and interference you will hear and be heard using a DX Engineering Maxi-Core® 20 1:1 Balun and Mount Kit.

A similar kit was formerly known as the Vertical Feedline Current Choke. But, the Maxi-Core® 20 1:1 Balun and Mount Kit bring new parts together to work on many types of antennas. They provide improved RF isolation of the feedline and current balance at the feedpoint of a vertical, a beam or rotatable dipole. This is a unique perpendicular mount that allows a beneficial separation between the ferrite of the balun and the antenna boom or mast, resulting in improved choking performance compared to a balun mounted on metal. The UV black high-strength polymer mounting plate provides additional isolation and holes for different mounting positions for the balun, horizontal or vertical. Stainless steel hardware is included to attach the plate to the stainless steel mounting bracket, which has laser cut holes for one of five optional DX Engineering Saddle Clamps to cover mast or boom sizes from 1 to 2 in. and 2.375 to 3 in.

Maxi-Core® 20 Baluns feature 1/4-20 stainless steel hardware and a high quality silver-plated PTFE dielectric SO-239 (UHF female) input connector. The SO-239 connector limits power handling to 5 kW or less at low SWR and reduced power at elevated SWR. These baluns exhibit very low insertion loss and inherently low SWR. Maxi-Core ® 20 Baluns are built into a convenient weather resistant NEMA enclosure with weep holes at all four corners of the "bottom" side of the enclosure, to vent properly when mounted vertically or horizontally for all types of antennas.

Click "More Detail" for additional information and click Suggested Parts for optional items required, including one saddle clamp to fit your mast or boom, and a wiring kit or flexible copper strap to connect the balun to the antenna feedpoint terminals.

Make your antenna play to its potential; reduce RFI and improve reception with DX Engineering Maxi-Core® 20 1:1 Balun and Mount Kits.

Documentation