THIS PAGE WILL BE UPDATED FROM TIME TO TIME - Please return and scroll down to see new and updated links and more information

Here is our version of the very popular Clifton Laboratories Z10000 Buffer Amplifier circuit designed by Jack Smith, K8ZOA (SK), which is required when adding a Software Defined Radio (SDR) receiver and panadapter display capabilities to an older receiver or transceiver, or to a new radio that does not have a real-time high-speed spectrum scope. The Z10000 Buffer Amp's high input impedance can safely tap the early-stage broadband Intermediate Frequency (IF) signal from inside your radio and feed the buffered and amplified low impedance IF signal to your external SDR receiver. It can then produce a spectrum scope - waterfall display pattern of the receiver signals on a compatible tablet or monitor and PC that is running the appropriate third party SDR software.

The DXE-Z10000U-KIT is the Universal Buffer Amplifier Kit that covers 50 kHz to 100 MHz. As a buffer, this circuit provides over 90dB of reverse isolation to protect the IF stages of the radio from possible birdies that may appear on the SDR receiver input.This kit is designed for those willing to do an internal modification, and will output the IF signal of virtually any receiver or transceiver that has a first IF within that frequency range. The DXE-Z10000U-KIT can be used as a buffer and low-gain preamp between any low level RF devices that operate in that range.  So, even if your radio has an IF output connector, the DXE-Z10000U-KIT may be used externally, with a user supplied shielded metal enclosure, to be certain to maintain proper radio operation.

DX Engineering Clifton Laboratories Z10000C Buffer Amp

Clifton Laboratories Buffer Amp kits now contain the updated, completely assembled and tested DX Engineering Z10000C PC Board with a nominal 6.5 dB gain, retaining all the benefits of the reliable original Z10000B boards. Kits include our finished printed circuit board, required coaxial cables with special connectors, insulating materials and hardware, all for an easier installation than ever before!

Due to the high number of specialized radio installations, no printed instructions are included with the buffer kits. Web links to installation documents and instructional videos are provided. A partial listing of specific radio Buffer Amplifier Kit installation instructions and videos appears below. Additional information and specifications will be posted, so check this page again soon.Here are the basic steps to this project:

1. Adding a spectrum scope display to a Radio that does not have one requires an external SDR receiver and monitor. 
2. The SDR receiver requires the Intermediate Frequency (IF) signal to display the exact signals the Radio is tuning
3. The DX Engineering Clifton Laboratories Z10000U Buffer Amplifier adds an IF Output to the Radio that doesn't have one (or buffers the ones that do).
4. With an accessory coaxial cable, connect the new IF output on the Radio to the Antenna Input of the SDR and tune it to the Intermediate Frequency of the Radio to see what it hears.

A third party SDR receiver, software that is often a free download and a compatible tablet or PC and monitor are required to make use of the IF signal provided by the Z10000 Buffer Amplifier and see the signals that your radio can only hear. For some, choosing and using your SDR can be a more challenging task than adding the Buffer Amp Kit in your radio. But the links here and elsewhere, even those that are dated, can help you get going.Available from DX Engineering is the amazingly small DXP-DX-PATROLMK4 SDR Receiver, a device that connects to a PC, Mac, Android Smartphone or Tablet with either the included micro-USB cable or an Android smart phone charger cable. For PC, many enjoy using HDSDR software with this unit, a free download from hdsdr.de. There are several other good SDR programs available on the Internet.

DX-Patrol MK4 SDR Receiver

The DX-Patrol MK4 is one of dozens of SDR receivers available, some cost less than $50.00 and some are over $2,000.00. A model that is well under $200 is quite sufficient for display of the IF signal from your radio. The common complaint that inexpensive SDR receivers produce images or overload is when they are connected a large HF antenna. But, for this IF display application, your radio's band pass filtering will probably prevent those problems. Here is a link to an exhaustive blog page on SDR, that features a roundup of SDR’s— in 2014. There are new versions out since then, but this page has in-depth background info on SDR radios of all kinds.https://www.rtl-sdr.com/roundup-software-defined-radios/The processing power of the smart phone, tablet, Mac or PC computer and the quality of the display will affect SDR receive operations and display of your radio's IF signal. But, an SDR display receiver does not necessarily need to be as good as the main receiver. That is a topic for discussion among enthusiasts. Near the bottom of this page are links to an SDR receiver kit called Soft Rock Lite II, for those who want to build an inexpensive SDR for this project.

The legacy that was built by Jack Smith, K8ZOA (SK), with Clifton Laboratories, lives on with select products, exclusively from DX Engineering.

Installing and Using Clifton Labs Buffer Amp – VIDEOS, pdf Articles, Webpages or BlogPosts Most of these links are dated and are provided for information only. No particular method of modification or installation is implicitly recommended. It is your responsibility to research this subject to find the version of installation that is applicable for your radio. Experienced electronics technicians are best suited for this radio modification project. DX Engineering is not responsible for the content of the following information or for your use of this information and subsequent damage to a radio. Proceed with caution! NOTE: Supplied cables do not have radio specific connectors that may be seen in videos or articles. Cable termination or soldering is the responsibility of the user.  Kenwood TS-590 By Steven Desmarais - N1IBCResults of Installation Video Z10000 in Kenwood TS-590S https://youtu.be/9DlpbeVlFTQTenTec Orion Model 565 and Orion II Model 566By Rick Williams - VE7TK http://www3.telus.net/ve7tk/9MHz_IF.pdfIcom IC-7410Videos by phillipssd1 https://www.youtube.com/watch?v=cBwqSCzeLPAhttps://www.youtube.com/watch?v=hD5LsUPXZu4Icom IC-7410 –VK4ZXI Web blog post by VK4ZXI http://vk4zxi.blogspot.com.au/2013/11/sdrs-at-first-if-of-trx-as-panadator.html Icom IC-910 Paper by M1BXF - pdf Instructions to install Z10000 into Icom IC-910 http://www.geekshed.co.uk/projectfiles/icom-ic-910h-if-output-modification/documents/Instructions_for_IC-910H_Main_Band_IF_v2.0_270114.pdf Yaesu FT-1000MPK8AC Recommends Clifton Labs Z10000B buffer amp then uses G4HUP http://www.k8ac.net/Implementation.pdf Yaesu FT-920Chick, K7VREArticle provided to Clifton Laboratorieshttps://static.dxengineering.com/global/images/technicalarticles/dxe-z10000u-kit_oh.pdfYaesu FT-450Web blog post by WS4E http://ws4e.blogspot.com/2011/07/ft-450-sdr-interface-to-softrock.htmlMore will be added!

Buffer Amp and SOFTROCK linksHere are links to an SDR receiver kit called Soft Rock Lite II, for those who want to build an inexpensive SDR for this project.http://fivedash.com/index.php?mainpage=product_info&products_id=5http://www.wb5rvz.org/softrock_lite_ii/index/projectId=8http://fivedash.com/resource/softwareSetup.pdf