InnovAntennas 50-LFA-4-LN 4-Element 50 MHz Yagi 18485-0039

5 out of 5 stars ( 2 )

Part Number: IVA-18485-0039

$489.99

Antenna, 50-LFA-4-LN, 50 MHz 4 Element Monoband Yagi, Low Noise, 11.15 ft. (3.4m) Boom, Stainless Steel Hardware, 50 Ohm, 5kW, Each
See More Specifications

InnovAntennas 50-LFA-4-LN 4-Element 50 MHz Yagi 18485-0039

InnovAntennas 50-LFA-4-LN 4-Element 50 MHz Yagi 18485-0039

IVA-18485-0039

5 out of 5 stars ( 2 )

Part Number: IVA-18485-0039

Estimated Ship Date from Ohio: Today

$489.99

Estimated Ship Date from Ohio: Today Would you rather pick it up?

Overview

Brand:
Manufacturer's Part Number:
18485-0039
Part Type:
Product Line:
DXE Part Number:
IVA-18485-0039
VHF/UHF Beam Antenna Type:
Loop-Fed Yagi
VHF/UHF Beam Antenna Elements:
4
Antenna Power Rating:
5,000 W
Beam Antenna Boom Length:
11.15 ft. (3.4m)
Beam Antenna Maximum Boom Diameter:
1.250 in. square
Beam Antenna Turning Radius:
8.00 ft.
Mast Mounting Clamp Maximum:
2.000 in.
Wind Surface Area:
1.770 sq. ft.
Beam Antenna Frequency Coverage:
50-50.5 MHz
Feedpoint Impedance:
50 ohm
Feedpoint Match Type:
Direct feed, 50 ohm
Antenna Feedline Connection Type:
Terminal studs
Antenna Weight:
8.60 lbs.
Quantity:
Sold individually.
VHF/UHF Beam Antenna Bands:
6 meters
VHF/UHF Beam Antenna Elements (application):
4
Antenna Gain:
9.4 dBi
Beam Antenna F/B (dB):
31.87 dB
E-Plane 3 dB Beamwidth:
83°
H-Plane 3 dB Beamwidth:
58°
Bandwidth at 2:1 SWR:
Over 600 kHz
Typical Beam Polarization:
Horizontal (SSB CW DIG)
Beam Antenna Boom Wavelength:
0.57

InnovAntennas 50-LFA-4-LN 4-Element 50 MHz Yagi

InnovAntennas 50-LFA-4-LN 4-Element 50 MHz Yagi was specifically designed for city use in noisy environments. This Loop-Fed model is optimized for front-to-back performance on relatively short boom of 11.15 ft. (3.40 meters), to reject as much local noise as possible. This antenna offers very good forward gain of 9.4 dBi (14.9 dBi at 10m above ground), and an exceptional 32 dB front-to-back rating, and SWR less than 1.4:1 across the 50-50.5 MHz range. The low profile LFA dipole achieves a significant reduction of noise, allowing clear reception of much weaker signals, a key component of operational improvements and success.

The 50-LFA-4-N includes a center mount boom to mast clamp for up to 2 inch masts (50mm) and is a sleek 1.77 sq. ft. wind load, making this beam ideal for typical 6 meter stations. It is also excellent for stacking to maximize gain, especially when available space restricts the use of a longer boom Yagi. It features a 1.25 in. (32mm) 16-guage square aluminum tubing boom for rugged reliability and low weight. This antenna is made with 1/2 inch (12.7mm) element center sections and 3/8 inch (9.525mm) for the outer elements. The antenna has fully insulated elements which will ensure continuous, high performance for many years to come, regardless of the weather conditions.

The introduction of the loop-shaped and phase-fed dipole achieves considerably fewer side lobes in the Yagi directional pattern. With less energy absorbed from the sides and from behind, these antennas are quieter than typical 4 element beams to achieve a higher 6 meter performance level. The 50 MHz Monoband LFA Yagis from G0KSC represent a significant advancement in the development of Yagi antennas. They provide a low-noise front-end for your radio, so you hear more signals. This compact 4-element 50 MHz LFA provides stunning performance across the important section of the 6m band, 50.0 - 50.5 MHz. With a direct 50 Ohm feedpoint, no matching losses and suppression of unwanted noise, InnovAntenna 50-LFA-4-N is hard to beat!

 Loading...
 Loading...

Reviews Write a Review

Some parts are not legal for use in California or other states with similar laws / regulations

Modal Header

Call To Order

This is a custom order part. You can order this part by Contacting Us.

CA Warning Icon

Cancer and Reproductive Harm -- www.P65Warnings.ca.gov

Email this page