RigExpert Stick Pro Antenna Analyzers are very compact and lightweight. They generate their own 0.1 mW signal to measure and report data on SWR (standing wave ratio), return loss, complex impedance (Z, R, X, L, C, Magnitude and Phase Angle at a single frequency. They can measure antenna systems, cables, filters and more, across the frequency range of 100 kHz through 600 MHz with a 100 point adjustable sweep width as narrow as a 10 kHz. Every Amateur band in the range is a pre-programmed selection or manually select any center frequency with any sweep width to be analyzed. A Type-N Female connector at the top of the unit is protected by a handy removable cover.

Here are some of the tasks easily accomplished with Stick PRO Analyzers:-Rapid SWR and resonance check of an antenna, in the field, mobile or stationary- Tuning an antenna to resonance with complex impedance readout graphically and numerically- Comparing characteristics of an antenna before and after a changes or specific events, such as rain, wind or ice- Measuring capacitance or inductance of reactive loads including coils and capacitors

RigExpert Stick Pro Analyzers are ready for use at home or in the field with the included rechargeable 2800 mAh Li-Ion 3-hour battery pack. Or, power it with a USB Type-C connection. The easy to read color screen has 220x220 pixel resolution for quick plot readings. Complete sweep data may be sent via the USB-C port or via internal Bluetooth to a laptop running downloadable AntScope2 software or Android tablet or smartphone device running the AntScope for Android app (available on Google Play). USB-C to USB-A cable included for power, recharge or PC connection for file transfer.

The RigExpert Stick Pro weighs only 6.5 oz. and measures 7.3 x 1.3 x 1.6 in. It features adjustments for each of these operating parameters: Impedance value, Amateur Band Sweep by ITU Region, Sweep speed and resolution and Battery saver. For Amateur antenna enthusiasts and engineering pros, the Stick Pro is another game-changing portable analyzer form RigExpert!

Inside the box:

• Quick Start Guide

• Neck Strap

• USB Cable

• Type-N to UHF SO-239 female adapter

RigExpert Stick-Pro Specifications:

• Frequency Range: 0.1 to 600 MHz

• Frequency Entry: 1 kHz

• Measurement for Systems: 12.5, 25, 28, 37, 50, 75, 100, 150, 200, 300, 450, 600 Ohm

• SWR Measurement Range: 1 to 10 in chart modes, 1 to 100 in numerical modes

• R and X Range: 0 - 10000, -1000 -10000

• Display Modes: Multi (a quick check of multiband antennas), SWR chart, 100 points, SWR, Return loss, R, X, Z, L, C, magnitude and phase angle at one frequency

• RF Output Connector: Type-N

• Output Power: -10 dBm (at a load of 50 ohms)

• Output Signal Shape: square

• Power: One 3.7V Lithium-ion battery type 18650, When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources

• Сharge Time: 3 hours when using a charger

• Interface: 2 × 3 keys on the waterproof keypad, 290×220 color TFT display

• Menus and help screens in English (by default), Japanese,

• USB connection to a personal computer, v.4.2 BLE Single Mode, Class B

• Operating Temperature: 32 - 104 °F (0 - 40 °)

• Weight: 6.5 oz. (185g) with battery

• Dimensions: 7.3 x 1.6 x 1.3 in. (185 x 40 x 33mm)