Availability
DX Engineering Parts and Accessories
DX Engineering RG-8X 50-ohm Bulk Coaxial Cable
DX Engineering RG-8X 50-ohm Bulk Coaxial Cable is a very flexible low-loss, gas injected foam dielectric feedline, with a braided shield and non-contaminating Type II-A PVC jacket, suitable for short run direct bury applications. Our RG-8X is intended for moderate-power HF stations or mobile applications where short runs and flexibility are key factors. Slightly larger than RG-58 cable, DX Engineering RG-8X offers better handling characteristics, very good shielding, and lower loss. DXE-8X uses standard PL-259 or Type-N connectors with UG-176S reducing adapters (connectors and reducers sold separately). Note: For additional product information, please look at the files under the "Documentation" tab.
( 186 )
$0.65
DX Engineering RG-213/U 50-ohm Bulk Coaxial Cable
DX Engineering RG-213/U is a low-loss, 50-ohm, standard-spec Coaxial Cable with a non-contaminating Type II PVC jacket. This is unterminated bulk cable that is sold by the foot. See Coaxial Cable Assemblies for coax with connectors. Specially manufactured for DX Engineering, RG-213/U feedline is perfect for outdoor use due to its excellent UV resistance and durability in direct-bury applications. Specially suited for high-power amateur stations, RG-213/U provides a lower loss solution for long cable runs at any power level. Featuring a solid polyethylene dielectric, this is the coax that withstands constant movement and flexing on tower mounted rotatable and directional beam antennas. DXE-213U is recommended by contest station owner K3LR for installation at tower top as "rotator loop" coax for HF and VHF. DX Engineering RG-213/U is easily terminated with standard solder or crimp style PL-259 and N connectors designed for RG-8 sized, 0.405 in. cables. DX Engineering Next Generation hybrid PL259s with crimp shield, solder center attachment are also a great choice for DXE-213U coax cable. Note: For additional product information, please look at the files under the "Documentation" tab.
( 110 )
$1.60
DX Engineering 400MAX Low-Loss 50-ohm Bulk Coaxial Cable
DX Engineering 400MAX is premium, low-loss, 50-ohm bulk cable with a special Type III-A, UV-resistant polyethylene jacket that is waterproof; ideal for outdoor applications, particularly direct-bury. With its larger 10 AWG stranded copper center conductor, 400MAX is specially suited for high-power amateur stations, providing a lower loss solution for long cable runs at any legal power level. The high-quality construction continues with a gas-injected foam polyethylene dielectric, followed by the highest level of shielding with bonded aluminum tape covered by a tinned copper shield braid. Coaxial cables with foil-braid dual shielding or foam dielectric are optimized for stationary simplex antenna applications across HF, VHF and UHF. DXE-400MAX is not recommended for use in in a VHF/UHF duplex repeater applications or for a beam antenna rotator loop. DX Engineering 400MAX Low-Loss 50-ohm Bulk Coaxial Cable accepts standard PL-259 or N connectors. Note: For additional product information, please look at the files under the "Documentation" tab.
( 92 )
$1.54
DX Engineering 450 Ohm Ladder Line
DX Engineering 450 Ohm Ladder Line is a transmitting grade low-loss parallel-wire RF feedline featuring a strong, waterproof, UV black polyethylene insulation. To maintain the wire spacing between the conductors while reducing losses, the integral flat plastic material alternates with rectangular openings, which explains the "Window Line" nickname. Capable of handling over 3 kW of RF power, DXE-LL450 is a very low-loss transmission line across HF. It is ideal for exceptionally long feedline runs and for low band wire antennas operated on multiple bands on which the feedpoint impedance can vary significantly, causing mismatch and elevated SWR. Unlike coaxial cables, DX Engineering DXE-LL450 Ladder Line maintains low RF losses at frequencies where antenna feedpoint impedance mismatches cause high SWR. It can provide significantly higher efficiency than coaxial cable when feeding non-resonant antenna systems that are matched with a wide impedance range antenna tuner. DXE-LL450 450 Ohm Ladder Line is a high-quality flat RF feedline, about 0.938 in. wide (15/16") with two 16-gauge copper-clad steel wire conductors (29 AWG x 19 strands) that provide the strength to hold up for long spans between supports without twisting. It exhibits a nominal impedance of around 400 Ohms and a nominal Velocity Factor of 91 percent. For proper performance, LL450 Ladder Line must be installed suspended through the air supported by insulators every 25 ft. or less, kept at right angles and several inches away from other wires, and at least one foot away when run parallel to the earth or large metal surfaces. Installing with an axial twist of one turn per 10 ft. can reduce wind, rain and ice loading, RF coupling and RF noise. DXE-LL450 can be mounted with insulators and suspended on metal or wood posts or run along a wood fence line, only if the fence has no wires or metal mesh that couples RF noise or unbalances the feedline. Often used for non-resonant wire doublet antennas, DXE-LL450 can be more easily terminated outdoors to a DXE-MC20-C4-1 4:1 Balun or a DXE-MC20-1-1T 1:1 Balun. Then, with no inline switches or relays, directly connect the antenna system to a typical indoor wide range antenna tuner using a solid dielectric coax, not foam dielectric, to handle high voltage at high SWR. DXE-213U or DXE-214 Coaxial Cable Assemblies 12 or 18 ft. with PL-259s are perfect for this method, which eliminates the need for a special balanced tuner, and avoids the losses and detuning effects caused by unbalancing when ladder line is routed indoors near wires and ducts. DXE-LL450 is sold by the foot, previously sold as DXE-LL450-CTL, this is the same ladder line with a new part number. It is also available in spools of 500 ft. DXE-LL450-5C and 1,000 ft. DXE-LL450-1K, which are specified for DX Engineering Reversible Beverage System Antennas. NOTE: This type of feedline is intended for MF and HF use and is not suitable for use above 54 MHz. Also consider DX Engineering 300 Ohm Ladder Line, DXE-LL300, an excellent alternative low-loss HF feed line that reduces impedance extremes on non-resonant HF multiband antenna systems.
( 63 )
$1.18
DX Engineering RG-8/U 50-ohm Bulk Coaxial Cable
DX Engineering RG-8/U Bulk Coaxial Cable is a new age low-loss 50-ohm feedline with gas injected foam polyethylene dielectric and black vinyl jacket. This is not your grandfather's RG-8. Highly flexible and specially well suited in low and high power Amateur stations, our new DXE-8U provides a lower loss solution, for nearly any length cable run, at any legal power level. High reliability, flexibility and low loss are key points when considering this cable. DX Engineering RG-8/U accepts standard PL-259 and N connectors (sold separately). Note: For additional product information, please look at the files under the "Documentation" tab.
( 48 )
$1.39
DX Engineering Heavy-Duty Control Cable
DX Engineering Heavy-Duty Control Cable suits a multitude of control applications, such as remote switching or antenna rotators. This high-quality, color-coded, PVC-jacketed, 8-wire control cable consists of two 16 AWG and six 18 AWG conductors. A convenient rip cord aids in stripping the jacket. DX Engineering Heavy-Duty Control Cable is adequate for most rotator-to-control box runs greater than 125 ft. Shorter runs may be served by our standard Control Cable model CW8.
( 15 )
$2.59
DX Engineering CW1812OR Heavy-Duty Spec Rotator Cable
Made to our specifications, DX Engineering CW1812OR Heavy-Duty Spec Rotator Cable is a rugged, waterproof, direct-bury and UV-resistant cable that we offer cut-to-length. This cable is required by the DXE-RT4500HD Heavy Duty Rotators, and OR-2800 positioners, for runs up to 400 ft., this control cable is also useful for prop-pitch motors and many other high-torque, heavy-duty rotators that use two-wire DC drive and a shielded pair for pulse position feedback. This is also great cable for relay power control and remote preamplifier systems located far from the station. To ensure the pulse positional information arrives to your controller without RF or noise, DX Engineering CW1812OR features a twisted pair of 18 AWG 16-strand tinned copper conductors with orange and blue PVC insulation that are encased in an aluminum tape foil shield, complete with an a tinned-copper 18 AWG 7-strand drain wire. The positioner motor is served with two 12 AWG 65-strand low-resistance, unshielded tinned-copper conductors with black and white PVC insulation, wrapped in clear tape. This heavy cable bundle is covered in a tough, 35 mil waterproof black polyethylene jacket that is about 0.375 inch diameter overall. This direct-bury capable and UV-resistant cable has markings that designate DXE-CW1812OR 18/2C with Shield plus 12/2C, with 300V and 75 degrees Celsius ratings, and RoHS compliance. Your investment in a high-quality, heavy-duty rotator deserves the proper control cable. DX Engineering CW1812OR Heavy-Duty Spec Rotator Cable is ready to be ordered in any US ft. length for your directional antenna positioning system.
( 5 )
$2.05
DX Engineering RG-8X High Visibility Orange 50-ohm Bulk Coaxial Cable
DX Engineering RG-8X High Visibility Orange 50-ohm Bulk Coaxial Cable is one of the most flexible high-quality low-loss coaxial cables on the market. DXE-8XV features a stranded copper 16 AWG center conductor, gas injected foam dielectric, with a braided copper shield and a non-contaminating, highly water-resistant Type II-A PVC direct-bury orange colored jacket. This cable is intended for most low, medium and medium-high power HF operations in base, mobile and especially in portable applications where short runs, flexibility and visibility are key factors. NOTE: DXE-8XV Orange will fade with continuous sunlight UV exposure. Color delivered can vary. DX Engineering DXE-8XV Orange Jacket Coax has the same industry standard specifications as DXE-8X black jacket coax. DXE-8X is the coax cable most often used for jumpers in the shack and for medium length cables for portable operations, offering significantly better handling characteristics than larger cables, excellent shielding, and lower loss than slightly smaller RG-58. DXE-8XV orange coax is a 0.242 in. diameter cable that can be terminated with standard PL-259 or Type-N connectors and UG-176S reducing adapters (connectors and reducers sold separately). DXE-8XV is also easily terminated with crimp connectors including DX Engineering Next Generation Crimp-Solder 8X PL-259 Connectors. Connectors and Tools are displayed in Suggested Parts. DXE-8XV with DX Engineering Next Gen PL-259 connectors is available in our top-quality Coaxial Cable Assemblies. DXE-8XV is the part number sold by the foot, or it is available in 1,000 ft. spools as DXE-8XV-1000. DXE-8XV Specs: Attenuation/100 ft. – Power Rating 0.65 dB @ 5 MHz – 3.0 kW 1.0 dB @ 10 MHz – 2.2 kW 1.5 dB @ 30 MHz – 1.2 kW For additional product information, please check the files in the "Documentation" section.
( 17 )
$0.69
DX Engineering 300 Ohm Ladder Line
DX Engineering 300 Ohm Ladder Line is a transmitting grade low-loss parallel-wire RF feedline featuring a strong, waterproof, UV black polyethylene insulation. To maintain the wire spacing between the conductors while reducing losses, the integral flat plastic material alternates with rectangular openings, which explains the "Window Line" nickname. Capable of handling over 2.5 kW of RF power, DXE-LL300 is a very low-loss transmission line across HF that is ideal for long feedline runs. It is an excellent feedline choice for a low band non-resonant wire antenna operated on multiple bands on which the impedance varies significantly, causing mismatches and elevated SWR. Unlike coaxial cables, DX Engineering DXE-LL300 Ladder Line maintains low RF losses at frequencies where impedance mismatches cause high SWR. The lower impedance of DX Engineering 300 Ohm Ladder Line is actually better suited than 450 ohm ladder line for limiting the impedance extremes of non-resonant multiband antennas. It can provide significantly higher efficiency than coaxial cable for feeding non-resonant antenna systems that are matched with a wide impedance range antenna tuner. DXE-LL300 Ladder Line is a flat, high-quality RF feedline, about 0.438 in. wide with two 18-gauge copper-clad steel wire conductors that provide the strength to hold up for long spans between supports without twisting. It exhibits a nominal impedance of 275 Ohms and a nominal Velocity Factor of 88 percent. For proper performance, LL300 Ladder Line must be installed suspended through the air supported by insulators every 25 ft. or less, kept at right angles and several inches away from other wires, and at least one foot away when run parallel to the earth or large metal surfaces. Installing with an axial twist of one turn per 10 ft. can reduce wind, rain and ice loading, RF coupling and RF noise. DXE-LL300 can be mounted with insulators and suspended on metal or wood posts or run along a wood fence line, only if the fence has no wires or metal mesh that couples RF noise or unbalances the feedline. Most often used for non-resonant wire doublet antennas, dipoles, and inverted-vees, DXE-LL300 can be more easily terminated outdoors to a DXE-MC20-1-1T 1:1 Balun. Then, with no inline switches or relays, directly connect the antenna system to a typical indoor wide range antenna tuner using a solid dielectric coax instead of foam dielectric, to handle high voltage at high SWR. DXE-213U or DXE-214 Coaxial Cable Assemblies 12 or 18 ft. with PL-259s are perfect for this method, which eliminates the need for a special balanced tuner, and avoids the losses and detuning effects caused by unbalancing when ladder line is routed indoors near wires and ducts. DXE-LL300 is sold by the foot, previously sold as DXE-LL300-CTL, this is the same ladder line with a new part number. It is also available in spools of 500 ft. DXE-LL300-5C and 1,000 ft. DXE-LL300-1K. NOTE: This type of feedline is intended for MF and HF use and is not suitable for use above 30 MHz.
( 25 )
$0.77
RG-400 High-Isolation Double-Shield 50-ohm Coaxial Cable
RG-400 is a high-isolation 50-ohm coaxial cable that is ideal for critical, very low signal level, low noise applications as well as high power handling for RF equipment interconnections. Proper terminations on RG-400 cable assemblies provides extremely low crosstalk and very low noise ingress with a double-braid shielding effectiveness that results in over 100dB of isolation across HF frequencies. This cable is Mil-Spec equivalent to M17/128-RG400. RG-400 is compatible with N-type and PL-259 solder type connectors with UG-175S reducers for RG-58 size cables. NOTE: RG-400 has an OD of 0.195 inch and is NOT the same as DXE-400MAX which is 0.405 inch OD. RG-400 Specs: Center Conductor: Silver Plated Copper – 20AWG Center Conductor Diameter: 0.0384 in. (19 strands of 0.008 in.) Dielectric: PTFE (Polytetrafluoroethylene) Dielectric Diameter: 0.116 in. Shield Construction: Two Layers of Braided Silver Plated Copper Shield Outer Diameter: 0.156 in. Jacket: FEP (Fluorinated ethylene propylene) Cable Overall Diameter: 0.195 in. Minimum Bend Radius: 1.0 in. Weight (lbs. per 1,000 ft.): 50.0 Capacitance: 29.4 pF/ft. Maximum Voltage: 1,900 V Velocity factor (VF), nominal: 69.5% (0.695) Click "More Detail" for more information
( 11 )
$7.49
DX Engineering Shielded Control Cable
DX Engineering Shielded Control Cable is a high quality shielded cable that is suitable for indoor or outdoor use. It features nine #24 AWG annealed tinned copper stranded conductors with color coded PVC insulation and aluminum foil shielding, plus a bare #24 AWG stranded tinned copper drain wire. This RoHS compliant cable supports an eight port remote switch with 1-of-8 control lines plus a common ground conductor AND a separate shield conductor. This cable has a thick, durable, chrome-gray PVC jacket. Plus, using a cable that has stranded conductors relieves the worry of breaking one of the conductors; unlike a different type of cable made with solid wire. This shielded control cable is ideal for use with DX Engineering Remote Antenna Switches, Four Square and Phased arrays, and should be considered a great choice for any of your low-current, custom remote switching applications. This cable is excellent for building accessory cable assemblies, RS-232 data cables, switching cables, and for control of low-voltage relays including receiving and transmitting antenna arrays. This cable is not intended for use with rotators or other medium current applications. You may order DX Engineering Shielded Control Cable by the foot in any lengths up to 500 feet and is available in a 1,000 ft. roll. Here are the "specs" on this very useful shielded control cable: Number of stranded conductors: 10 Number of insulated conductors: 9 Insulated conductor AWG (Strands): 24 (7/32) Drain wire AWG (Strands): 24 (7/32) Insulation nominal wall thickness: 0.010 in. Nominal Capacitance (pF/ft.): 30 Jacket nominal wall thickness: .035 in. Nominal outer diameter: 0.240 in. Cable Temperature Range: -20 to 80 degrees C Cable Voltage: 300 V
( 8 )
$2.09
DX Engineering RG-58A/U 52-ohm Bulk Coaxial Cable
DX Engineering RG-58A/U 52-ohm Bulk Coaxial Cable is a highly flexible, 52 ohm feedline with a black PVC jacket, which is ideal for all indoor and some outdoor applications where UV exposure is not an issue. Specially suited for low to medium-power amateur stations, RG-58A/U also provides an ultra-flexible cable for coaxial jumpers. DX Engineering RG-58A/U features a low-density polyethylene dielectric and uses PL-259 or 2-piece N connectors. Both connector types must be used with reducing adapters that fit RG-58 cable.
( 17 )
$0.55
DX Engineering CW8 Control Cable
DX Engineering CW8 Control Cable suits a multitude of control applications, such as remote switching or antenna rotators. This high-quality Polyethylene (PE) jacketed and color coded 8-wire control cable consists of two 18 AWG and six 22 AWG conductors. DX Engineering Control Cable is adequate for most rotator-to-control box runs of 125 ft. or less.
( 32 )
$1.79
DX Engineering Super Heavy Duty Control Cable
DX Engineering Super Heavy Duty Control Cable, DXE-CW8-SHD is well suited for a multitude of control applications, such as for large or distant antenna rotators or for remote switching. This high-quality, color-coded, PVC-jacketed, 8-conductor control cable consists of two 14 AWG and six 18 AWG conductors (14-2 + 18-6, no drain wire). DX Engineering Heavy-Duty Control Cable is recommended for most rotator-to-control box runs greater than 250 ft. Shorter runs could be served by DX Engineering Heavy Duty Control Cable DXE-CW8-HD or by the standard duty Control Cable DXE-CW8.
Not Yet Reviewed
$2.10
DX Engineering RG-11/U 75-ohm Bulk Coaxial Cable
DX Engineering RG-11/U 75-ohm Bulk Coaxial Cable is a low-loss, high-power 75-ohm feedline with a premium-grade, waterproof polyethylene jacket. Manufactured specially for DX Engineering, the 11U jacket is UV-resistant and, due to its durability, works great in direct-bury applications. This RG-11/U cable is ideal for impedance-matching phasing cables for arrays from HF Four Squares to VHF applications. The 82 percent velocity of propagation provides the longer cables necessary to reach from the center-of -the-array mounted Four Square controller to each element at the corners of the array. DX Engineering 11U cable is easily terminated with any of the solder type and crimp type PL-259 (UHF male) and N connectors which are designed for installation on 0.405 in. OD, RG-8U sized cables. You are in the market for a 75-ohm cable that provides high reliability and long life. Choose DX Engineering RG-11/U 75-ohm Bulk Coaxial Cable.
( 8 )
$1.49
DX Engineering RG-214 50-ohm Double Shielded Coaxial Cable
DX Engineering RG-214 is a high-isolation, double shielded low-loss 50-ohm coaxial cable. Covered with a black, non-contaminating Type-II-A PVC this cable jacket offers a high level of UV protection and durability for all outdoor uses and direct-bury applications. Specially manufactured for DX Engineering, our RG-214 is a rugged, flexible MIL-SPEC coax with a 12-gauge stranded silver plated copper center conductor, solid polyethylene dielectric and TWO layers of silver plated braided copper shields to provide exceptional RF isolation and superior power handling performance. This coax is perfect for use where many cables are bundled together and higher RF isolation is critical. Use DXE-214 in bundles of multiple monoband and multi-band directional antenna feedlines on towers, especially for rotator loops. This cable excels at maintaining RF isolation in the shack or in the equipment room of stations that have many antenna feedlines. DXE-214 is specifically recommended for use in VHF/UHF duplex repeater applications. IMPORTANT NOTE: Due to the double braided shield, the jacket outside diameter of DXE-214 is 0.425 in. Therefore, RG-214 coax cable CANNOT be stripped with the specialized prep tools made for standard 0.405 in. OD, RG-8U, 400MAX and RG-213 size coaxial cables. DX Engineering offers only solder type PL259 and N connectors that fit onto DXE-214 cable. No crimp type connectors are available. Use DXE-15035 Coax Cable Strippers for DXE-214 and these compatible connectors installed with soldered shield and soldered center pin: PL-259/UHF Male – DXE-PL-259-6 AML-83-1SP-6 Type N – DXE-1001-S-4 DX Engineering RG-214 50-ohm Double Shielded Coaxial Cable is sold in bulk, cut to length and on 500 ft. and 1,000 ft. spools. We also stock pre-made assemblies with PL-259 and type N connectors; search for 214 assemblies.
( 1 )
$9.49
DX Engineering Aluminum Tubing
DX Engineering High-Strength Aluminum Tubes are ideal for your antenna building projects. It is made available in sizes that fit into and over the next, with close tolerances specifically designed for strength when joined and overlapping only by a few to several inches, to build Yagi, Moxon or vertical antenna elements. NOTE: This tubing is NOT intended for each size to telescope completely into the full length of the next; it cannot be used for telescopic mast building. DX Engineering aluminum tubing is manufactured to very close tolerances. This provides the greatest amount of surface contact between nesting tubes for mechanical and electrical stability. Due to the close tolerance, any burrs, dirt, grit or other foreign material, as well as dents, dings and unseen bending or crushing suffered during shipment will cause binding that prevents this aluminum tubing from fully nesting. 6063-T832 seamless drawn aluminum tubing is available in 3, 6 and 12 ft. lengths. 6063-T832 tubing provides good resistance to general corrosion, including stress corrosion cracking, and an excellent surface appearance. Use a series of 3 ft. lengths to build an element that tapers more quickly for lower wind-resistance applications. Use a series of 6 ft. lengths to make an element that tapers more slowly for greater strength and bandwidth. The 12 ft. lengths are great for HF Yagi construction. Most sizes (except 12 ft.) are available slit on one end for use with DX Engineering stainless steel element clamps. If un-slit ends are required for your applications, merely insert the slit end into the next larger size in the stack and use your own attachment method. 6063-T832 tubing features a 0.058 in. wall thickness and is available in 1/8 in. increments from 3/8 in. to 2-1/8 in. O.D. 3003-H14 drawn aluminum tubing features a 0.035 inch wall thickness and a 1/4 inch outside diameter. Each piece is supplied with non slit ends and is available in both 3 foot and 6 foot lengths, making them ideal for your antenna building projects. If your setup requires maximum strength at very long assembly lengths, then choose DX Engineering 6061-T8 tubing. This heavy-duty version features a 0.120 in. wall thickness and is available in 1/4 in. increments from 1-1/2 in. to 3 in. O.D. Packaged shipments of 6 ft. tubing have oversize shipping fees, regardless of the number of 6 ft. pieces. Therefore, order more 6 ft. pieces to spread oversize fees over more tubing for a more cost effective shipment. Tubing that is 12 ft. long MUST be shipped by truck freight. If you need many pieces of the same size in a 12 ft. tube length, then buying DX Engineering High-Strength Aluminum Tubing Bundles (elsewhere in our catalog) maximizes the economy of scale for your shipping costs. NOTE: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Order DX Engineering High-Strength Aluminum Tubing here.
( 133 )
$8.99
DX Engineering Rope Guying Earth Anchors
DX Engineering Rope Guying Earth Anchors are designed for use on ropes to build a custom guying system for your vertical antenna. They are manufactured from high-quality steel and have a protective finish applied for long-lasting durability. DX Engineering Rope Guying Earth Anchors feature a specially designed twisted base to allow for easy installation in the ground. *Shaft Diameter: 0.5in. *Loop Height: 2.24in. (loop tip to outside top of the loop) *Anchor Length: 15.00in. *Anchor Width: 3.0in.
( 14 )
$8.69
DX Engineering Zip Cord Power Wire
DX Engineering Zip Cord Power Wire is 2-conductor stranded copper insulated cable typically used for low voltage power circuits. It may also be used as speaker wire for low to high power audio. The conductor insulation colors are red and black for immediate polarity identification for both DC and audio applications. This wire is very easy to use. It is a highly flexible, high strand-count insulated wire pair that pulls apart easily, should you want to, hence the name "Zip Cord." Conductor construction details are below. DX Engineering Power Wire is available in six sizes; 18, 16, 14, 12, 10 and 8 AWG (0.8, 1.3, 2.1, 3.3, 5.3 and 8.4 sq. mm equivalent). This wire is sold by-the-foot and is also available in bulk lengths of 500 or 1,000 ft., so you can order just the right size and length for your system! Build your DC power systems with this wire, terminated with Anderson Powerpole® connectors, using our Ultra Crimp Tools, all available from DX Engineering. Order extra sizes and lengths to keep on hand for those spur-of-the-moment projects. DX Engineering Zip Cord Power Wire is ready to deliver power to your system! + + + + + + + + + + + + + + + + + + + + + + + + + + + DX Engineering Power Wire Conductor Construction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Conductor Size - Number of Strands/Strand AWG 18 AWG - 16/30 16 AWG - 26/30 14 AWG - 41/30 12 AWG - 65/30 10 AWG - 105/30 8 AWG - 152/30
( 58 )
$0.47
—
$2.12
DX Engineering Hats
Show your ham radio friends that you are serious about your favorite equipment provider by wearing, or giving them, one of these great DX Engineering Hats. They are a high quality ball cap style hat made from a polyester/cotton material and have an adjustable back-strap for sizing. These hats are all black and feature the multi-colored DX Engineering logo. Adjustable; so one size fits all!
( 45 )
$9.99
DX Engineering Guy Rings
DX Engineering Guy Rings advance the art of stabilizing vertical rigid telescopic tubing. These newly engineered and incredibly strong Guy Rings are intended for rope guying DX Engineering, Hustler, and all brands of aluminum tubing vertical antennas, as well as the DX Engineering Telescoping Fiberglass and Aluminum Tubing Kits. Unlike the other guys' rings, DX Engineering Guy Rings have smoothed holes with no sharp edges, protecting your directly threaded ropes. Six 5/16 in. diameter attachment holes allow guy ropes to be properly spaced for three or four way guying systems. DX Engineering Guy Rings are made from the super strong, black UV resistant, glass-reinforced poly-resin material that was introduced with DX Engineering's Universal Wire Antenna Kits EZ-BUILD™ UWA Center-T and End Insulators. They are virtually impervious to extreme outdoor conditions and mechanical stress. If you have a DX Engineering wire antenna or UWA Kit, you will know that these Guy Rings are made to last and will set a new standard in rope guying attachments. With their 1/2 in. thick center hole shoulder, these Guy Rings simply slide over their respective tubing size and seat firmly against the top of the larger tubing section below. Three kits with eight sizes provide rope guying for a myriad of vertical tubing installations: - DXE-GR-2P has two guy rings that fit onto the trap tubing of the Hustler BTV Series Vertical Antennas - DXE-GR-4P has four larger guy rings for Heavy Duty Telescoping Fiberglass sets or aluminum tubing - DXE-GR-5P is the original set with sizes for Standard Telescoping Fiberglass sets or various sized aluminum tubing DX Engineering Guy Rings are so handy and inexpensive that you can have a set on hand, ready for your next antenna project. Order yours today!
( 87 )
$5.29
—
$9.29
DX Engineering FSM-HWK Hardware Kits
DX Engineering FSM-HWK Hardware Kits mount many chassis mount connectors with a flange, especially the DXE-UHF-FDFB UHF Flanged Double Female Bulkhead Connector and other SO-239 female chassis connectors. Comprised of a set of four 4-40 x 1/2 in. screws, four flat washers, four star washers and four nylon locking nuts, these hardware kits will keep your flange-mount coaxial connectors in place. Made of superior grade stainless steel and tough nylon, these hardware kits will last and stay bright for decades. Used on chassis, radial plates (DXE-RADP-3), coaxial cable grounding brackets (DXE-CGB-150, DXE-CGB-200), these hardware kits are virtually universal for mounting flanged coaxial connectors. NOTE: Hardware requires 3/16 in. and 1/4 in. nut drivers for 4-40 Bolt Hex Head and nylon-insert lock nuts, respectively. Whether you are mounting our DXE-UHF-FDFB flanged bulkhead connector or other flanged connectors, these FSM-HWK Hardware Kits from DX Engineering are your best hardware choice!
( 7 )
$5.29
DX Engineering Tinned Copper Braid
DX Engineering tinned copper braid is available in five widths and is perfect for grounding applications. It's sold by the foot to accommodate almost any project. Contact your DX Engineering sales representative to discuss your needs if long, continuous lengths are required.
( 40 )
$0.85
—
$2.25
DX Engineering RG-6U 75-ohm Flooded Quad Shield Coaxial Cable
DX Engineering RG-6U 75-ohm Flooded Quad Shield Coaxial Cable is our top-of-the-line, direct-bury RG-6. It has low RF signal loss and provides greater protection against electromagnetic interference. Available cut-to-length by-the-foot or in 1,000 ft. spools, this is the best ultra-high quality RG-6/U self-healing quad-shield cable solution. This cable may be terminated in the field with black EX6XL Type-F Universal Compression Connectors, also available from DX Engineering. DXE-RG-6UFQ cable is ideal for many receiving applications including active or passive HF Amateur Radio and SWL receive antenna arrays and systems, LW and MW magnetic loop antennas, Beverage antennas, over-the-air TV, AM and FM broadcast reception, CATV systems and video distribution and satellite radio installations such as Sirius/XM. In fact, the low-loss characteristic of our RG-6 cable is excellent for digital audio up through microwave frequencies of satellite radio systems! Our RG-6 flooded quad shield cable has gas-injected polyethylene foam dielectric for the lowest loss and maximum moisture resistance. With an 18 AWG copper-clad steel center conductor it is extremely strong and durable. Two foil shields plus two high-density aluminum braids provide ultimate four-layer RF shielding. The waterproof UV protected black jacket is made with a tough and flexible polyethylene (PE). This cable is infused with a flooding compound that provides a permanent barrier to moisture and is self-healing to minor cuts. The nominal impedance of DXE-RG-6UFQ cable is 75 ohms with a nominal Velocity Factor of 82% (VF = 0.82). The minimum bend radius is 2.500 in. Beware of cheaply made cable with unknown impedance and loss characteristics. If some other cable is substantially less expensive, that should tell you something, right? DX Engineering RG-6U 75-ohm Flooded Quad-Shield Coaxial Cable is absolutely the best RG-6 quad-shield cable available and it is RoHS compliant! Check these super low attenuation figures! 5 MHz: 0.6 dB/100 ft. 30 MHz: 1.1 dB/100 ft. 55 MHz: 1.6 dB/100 ft. Losses at 1.8 MHz are virtually insignificant over several hundreds of feet of this coaxial cable. It can be used for low band receive antennas and arrays without the complications of using a preamp at the antenna. Are you installing or upgrading a Low Band receiving antenna or a CATV or satellite video distribution system that uses RG-6/U Quad cable? If so, then order the new benchmark in RG-6 cable: DX Engineering RG-6U 75-ohm Flooded Quad Shield Coax. Your efforts will be rewarded with the results that you expect, using the best cable from DX Engineering.
( 8 )
$0.37