Availability
Erico Parts and Accessories
ERICO Copper Grounding Bars
ERICO Copper Grounding Bars provide proper bonding; essential to create an equipotential plane between service grounds and shack equipment. This equipotential plane provides a near-zero voltage differential and serves to protect people and equipment during transient and electrical-fault events. These ERICO grounding bars have a series of 0.281 in. diameter holes that accommodate mounting many items, including Alpha Delta, PolyPhaser, and other surge-protection devices. They include stand-off mounts that deliver extreme isolation from the mounting surface. When used in tandem with ERICO ground rods and ERICO CADWELD ONE SHOT Wire to Ground Rod Clamps, there is no better grounding system available… period! These ground bars have a 1-1/16 in. standoff of their stainless mounting brackets plus a 1-1/2 in. insulator. This places the inside of the ground bar more than 2-1/2 inches from the mounting surface. There's plenty of room to work after mounting the bar. These bars may be mounted horizontally or vertically and the mounting holes in the copper bar are 8-7/8 in. on center. These grounding bars provide a convenient, reliable grounding location. Their quarter-inch thick solid-copper bar represents the ultimate in ground connections. ERICO grounding bars include insulators, stainless steel brackets, stainless steel mounting bolts, and are UL Listed. For premier grounding at your station, rely on ERICO Copper Grounding Bars from DX Engineering.
( 29 )
$127.99
Clearance
ERICO Lightning Rods
ERICO Lightning Rods, also known as air terminals or strike termination devices, are offered in a range of base materials and surface plating. These lightning rods provide a minimum of five full threads of engagement with their mounts. Available in various lengths and diameters, ERICO Lightning Rods will offer a better path to ground than your expensive site equipment. Although there is no 100 percent protection from lightning damage, these lightning rods, when combined with coaxial surge protectors and other standard grounding practices, offer the best protection available. ERICO lightning rods are designed to be installed directly to structural steel in locations such as Amateur Radio and communication towers. Shunt lightning away from other, more destructive paths. Order these quality ERICO Lightning Rods from DX Engineering.
Not Yet Reviewed
$213.99
$121.99
—
$171.19
ERICO One-Shot PLUS Control Unit Replacement Leads
ERICO One-Shot PLUS Control Unit Replacement Leads make replacement of original ignition leads or acquisition of accessory leads very convenient. Available in 6 or 15 ft. lengths, these purpose-built ignition leads are used with CADWELD PLUS Control Units. These high-temperature control-unit leads attach between the controller and the One-Shot PLUS ignition strip, providing a safe distance between you and the exothermic weld material. Attachment to the weld igniter is accomplished using a custom made, purpose-designed termination clip. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Stand back and safely watch your welding operation! Replace or accessorize with ERICO One-Shot PLUS Control Unit Replacement Leads from DX Engineering!
Not Yet Reviewed
$101.99
ERICO Ground Rod Installation Tools
ERICO Ground Rods are a vital part of your station and antenna grounding systems—and having the right tools to install them properly is important. These ERICO Ground Rod installation tools will not deform the end of the rod, making the connection of the ground conductor quick and easy. They're usable on many types of round ground rods: copper-bonded, galvanized, and stainless steel. Inserts are interchangeable with the standard ground rod driver body. Order your ERICO Ground Rod Installation Tools from DX Engineering today!
Not Yet Reviewed
$186.99
—
$226.99
ERICO L160 Handle Clamps
ERICO L160 Handle Clamps are used to securely close their exothermic mold around the conductors to be welded. These handles work with most molds requiring 3 in. handle clamps. Most reusable ERICO molds are held together and in place by handle clamps. Order your ERICO L160 Handle Clamps from DX Engineering.
Not Yet Reviewed
$212.99
ERICO Lightning Rod Mounting Hardware Accessories
ERICO Lightning Rod Mounting Hardware Accessories include mount bases that facilitate mounting ERICO threaded lightning rods to horizontal pipes, tubes or rods from 1.5 to 2.5 in. outside diameter. For mounting to vertical tubes (i.e. tower legs) add ERICO right angle adapters. ERICO mount bases feature cast bronze mounts for ruggedness and weather resistance. ERICO right angle adapters provide an additional 2 in. offset when used with lightning rod bases. Protect your valuable equipment as much as possible. Mount your ERICO lightning rods with ERICO Lightning Rod Mounting Hardware Accessories from DX Engineering.
Not Yet Reviewed
$103.99
ERICO Cable to Ground Rod Molds
ERICO Cable to Ground Rod Molds allow you to produce a non-removable, permanent, exothermic connection to a ground rod that will not loosen, corrode or increase in resistance for the life of the installation. These molds, when used with the proper exothermic welding material, create a welded connection that thermally joins the wire/cable to the ground rod. These exothermic molds are ideal for non-threaded copper-bonded steel, galvanized or stainless steel ground rods from 0.5 to 0.75 in. diameter. Simply select the mold to fit your ground rod and ground conductor. ERICO Cable to Ground Rod Molds have been used for making permanent and reliable connections to ground rods for telecommunications, broadcast stations, cable television applications and electrical transmission and distribution. Builders in those applications have long known the value and quality of ERICO systems. Any outdoor connection made by mechanical-clamping methods begins to degrade from its first day of installation. ERICO has provided the industry-standard against which all other ground connections are measured. No invention or innovation has proven to be better. Now you may use ERICO products to ensure the best, most reliable and superior ground connection for your Amateur Radio station! Important note: The use of ERICO exothermic welding material in these products generates extreme heat. Please follow all manufacturer instructions carefully to ensure safe and successful application of their product. For the highest-quality ground rod connections, choose ERICO Cable to Ground Rod Molds, now available from DX Engineering!
Not Yet Reviewed
$198.99
ERICO CADWELD Cable Cleaning Brushes
CADWELD exothermic molds work much more reliably when the cables to be welded are cleaned before welding. CADWELD cable cleaning brushes work quite well at removing dirt and corrosion, leaving conductors ready to weld. Cleaning brushes are specially designed brushes and are sized for easy, efficient use. These brushes are generally preferred for cleaning concentric conductors and bus bars. Get maximum reliability from your CADWELD exothermic molds. Order ERICO CADWELD Cable Cleaning Brushes from DX Engineering.
Not Yet Reviewed
$148.99