Availability
Erico Parts and Accessories
ERICO Lightning Rods
ERICO Lightning Rods, also known as air terminals or strike termination devices, are offered in a range of base materials and surface plating. These lightning rods provide a minimum of five full threads of engagement with their mounts. Available in various lengths and diameters, ERICO Lightning Rods will offer a better path to ground than your expensive site equipment. Although there is no 100 percent protection from lightning damage, these lightning rods, when combined with coaxial surge protectors and other standard grounding practices, offer the best protection available. ERICO lightning rods are designed to be installed directly to structural steel in locations such as Amateur Radio and communication towers. Shunt lightning away from other, more destructive paths. Order these quality ERICO Lightning Rods from DX Engineering.
Not Yet Reviewed
$250.99
ERICO CADWELD Grounding Connection Molds
ERICO CADWELD Grounding Connection Molds are semi-permanent graphite molds for making CADWELD connections within your grounding system. In exothermic welding, the mold controls the direction and speed of the molten CADWELD metal flow and its final shape. The graphite used in the construction of a CADWELD mold is a high-temperature type that lasts for an average of 50 or more CADWELD connections under normal usage. ERICO CADWELD Grounding Connection Molds are available for welding ground conductors to bus bars or ground lugs, making parallel wire/cable connections, "Tee" connections and "X" connections. For connection to ground rods, please see ERICO CADWELD ONE SHOT Wire to Ground Rod Clamps. These molds require the use of CADWELD welding material (weld metal) that causes the fusion of the conductors placed into the mold. CADWELD welding material provides the heat to melt the conductors and delivers additional metal to the mold as needed for a solid junction. Please click the "Documentation" tab* for additional information on items required for the use of each mold and typical application details, including mold instructions. *Note: Whenever the DX Engineering "Documentation" tab is available for any item, please look at the associated files for additional product information. ERICO CADWELD products have been used in commercial grounding system construction for decades. When you need to make a lot of permanent connections in your grounding system, remember to get ERICO CADWELD Grounding Connection Molds from DX Engineering.
Not Yet Reviewed
$304.99
ERICO CADWELD PLUS Control Units
ERICO CADWELD PLUS Control Units are used to ignite the weld material in One-Shot PLUS exothermic welds. When common flint igniters are used for exothermic ignition, you must be right at the mold. That makes gloves and eye protection imperative. With CADWELD PLUS Control Units you may stand well away, providing a safety margin. CADWELD's model PLUSCU control unit comes with 8 AA batteries and will ignite about 600 One-Shot PLUS exothermic welds before battery exhaustion. These units include a 6-foot (1.8 meter) high temperature control unit lead. The lead attaches to the ignition strip using a custom made, purpose-designed termination clip. After the termination clip is installed on the ignition strip, the installer pushes and holds the ignition button to start a charging and discharging sequence. Within a few seconds the control unit sends a predetermined voltage to the ignition strip and the exothermic reaction is initiated. Once initiated, the ignition process is automatic. These control units are not for use with CADWELD One-Shot welding. Only One-Shot PLUS is designed for electronic ignition. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Accessory or replacement leads are available in 6 and 15 ft. lengths. When you want total control of your exothermic welding processes, use ERICO CADWELD PLUS Control Units, now available from DX Engineering!
Not Yet Reviewed
$498.99
ERICO Self-Igniting Propane Torch Heads
ERICO Self-Igniting Propane Torch Heads are at the top of the "quality" list. These torch heads fit the popular portable propane bottles and provide instant flame control. Just look at these great qualities: * Self-igniting * Squeezing the control knob produces an instant flame; releasing it extinguishes the flame * No flame adjusting * Burn tip remains cool during normal use * Operates on its side or upside down * Can withstand 60 MPH (96 KPH) winds without flare-out * Fits all standard 14.1 and 16.4 ounce (400 and 465 gram) propane cylinders These torch heads are great for pre-warming your exothermic joints or for general torch use at work or around the house. Automatic control means that if accidentally dropped the flame will go out- instantly. Now THAT's safety! Don't keep that old, dangerous torch; it should be replaced. Order ERICO Self-Igniting Propane Torch Heads from DX Engineering and do it the safe, easy way!
Not Yet Reviewed
$342.99
ERICO Cable to Ground Rod Molds
ERICO Cable to Ground Rod Molds allow you to produce a non-removable, permanent, exothermic connection to a ground rod that will not loosen, corrode or increase in resistance for the life of the installation. These molds, when used with the proper exothermic welding material, create a welded connection that thermally joins the wire/cable to the ground rod. These exothermic molds are ideal for non-threaded copper-bonded steel, galvanized or stainless steel ground rods from 0.5 to 0.75 in. diameter. Simply select the mold to fit your ground rod and ground conductor. ERICO Cable to Ground Rod Molds have been used for making permanent and reliable connections to ground rods for telecommunications, broadcast stations, cable television applications and electrical transmission and distribution. Builders in those applications have long known the value and quality of ERICO systems. Any outdoor connection made by mechanical-clamping methods begins to degrade from its first day of installation. ERICO has provided the industry-standard against which all other ground connections are measured. No invention or innovation has proven to be better. Now you may use ERICO products to ensure the best, most reliable and superior ground connection for your Amateur Radio station! Important note: The use of ERICO exothermic welding material in these products generates extreme heat. Please follow all manufacturer instructions carefully to ensure safe and successful application of their product. For the highest-quality ground rod connections, choose ERICO Cable to Ground Rod Molds, now available from DX Engineering!
Not Yet Reviewed
$304.99