Availability
LDG Electronics Parts and Accessories
LDG Electronics Z-100A-DXE Automatic Antenna Tuner and Interface Cables Package
LDG Electronics' Z-100A-DXE Automatic Antenna Tuner and Interface Cables Package is a special, limited-time offer that includes every available transceiver interface cable. The very reasonable pricing of the LDG-Z-100A-DXE simplifies your tuner and cable purchase by eliminating the guesswork of choosing the correct interface cable. Order this great 'tuner and all interface cables' package deal while you can, exclusively from DX Engineering! LDG continues to set new standards for auto-tuners and accessories in amateur radio service. LDG Electronics is a family-owned and operated company dedicated to bringing innovative, quality products to the amateur market. Their focus is anticipating and meeting customer needs and providing world-class support.
( 59 )
$192.99
LDG Electronics Z-11ProII Automatic Antenna Tuners
LDG Electronics Z-11ProII Automatic Antenna Tuners are everything you always wanted in a small, portable tuner that's been designed from the ground up for battery operation. Weighing only 18 oz., they handle 0.1 to 125 watts, making them ideal for both QRP and standard 100 watt transceivers from 160 to 6 meters. Z-11ProII tuners use LDG's state-of-the-art, processor-controlled Switched-L tuning network. They will match dipoles, verticals, inverted Vs, or virtually any coax-fed antenna. With an optional balun, they will also match longwires or antennas fed with ladder-line. Frequency-sensing circuitry lets the Z-11Pros "know" your operating band and frequency. These tuners have 2,000 memories that are used to automatically store tuning configurations for each frequency and band… as you use them. Whenever you transmit on or near a frequency you've used before, the Z-11ProIIs re-tune from memory almost instantly. Memories are retained indefinitely. Full auto mode tunes with SSB. Just speak into the mic, and it tunes! Rugged and easy-to-read LEDs indicate SWR and status. LDG Electronics Z-11ProII tuners use latching relays, which retain the tuned configuration, even when powered down. The current draw when not tuning is effectively zero. Additional features include: * Tuning time is 0.1 to 6 seconds full tune, 0.1 seconds memory tune * Selectable user parameters: auto/semi, threshold, and more * 1.8 to 54.0 MHz coverage with built-in frequency sensor * Tunes 6 to 1,000 ohm loads (16 to 150 on 6m) * Includes 6 ft. DC power cable * Power requirements are 6 to 16V DC at 300 mA maximum * 25 uA standby current * User installable 4-AA battery holder (batteries not included) * Weight: 1.5 lbs. Note: For additional information, please look at the files under the "Documentation" tab. With the list of features above, LDG Electronics Z-11ProII Automatic Antenna Tuners from DX Engineering could just be the best portable automatic tuner ever built!
( 33 )
$249.99
LDG Electronics Z-100Plus Automatic Antenna Tuners
LDG Electronics Z-100Plus Automatic Antenna Tuners sport 2,000 memories that store both frequency and tuning parameters! These small and simple-to-use tuners will run on any voltage source from 7 to 18 V, or six AA batteries will run them for a year of normal use. Current draw while tuning is less than 100ma. Z-100Plus antenna tuners now include an internal frequency counter, so the operating frequency is stored with tuning parameters to make memory tunes a really fast 100 milliseconds (full tunes take an average of only 6 seconds). With all of these enhancements, you'd expect to pay more, but LDG offers the Z-100Plus tuners at an affordable price. Additional features include: * RF Power: 0.1 to 125 watts SSB and CW, 30W on PSK * Latching relays for ultra-low power consumption * 2,000 memories sorted by frequency * 1.8 to 54 MHz coverage (continuous coverage for MARS) * Tunes 6 to 800 ohms (16 to 150 on 6m) * SO-239 in and out connections for dipoles, verticals, beams, G5RV, OCF, Cobra, etc. * 7 to 18V DC, 100 mA * 6 ft. DC power cable included * Dimensions: 5.5 L, 5.5 W, 1.5 H in. * Weighs 1 lb. Here's a great tuner for packing into the woods or for SOTA work! Use it mobile, portable or in the shack. You can't lose with one of these LDG Electronics Z-100Plus Automatic Antenna Tuners from DX Engineering!
( 39 )
$199.99
LDG Electronics Dual Analog Color Meter for IC-7610 Transceivers
LDG Electronics Dual Analog Color Meters for Transceivers provide two 3.5 in. external meters for specific high-grade transceiver models. They display S-meter on receive, power out, PA current, SWR, ALC level, compression, supply voltages and more—dependent upon the transceiver model. What's more, these multi-function meters and the virtual meter on your radio work simultaneously. Each meter is individually backlit by an adjustable color LED, powered by any 12 Vdc, 500ma source. The color and brightness controls are on the back panel. LDG Electronics Meters are fully assembled and calibrated, and both the radio and power cables are included, so you're ready to go right out of the box! LDG Electronics Dual Analog Color Meters feature: * Dual 3.5 in. analog meters * Displays: S-Meter, RF power, SWR, etc. * Color/Brightness: Rear panel adjustment for each meter * Voltage: 13.8 V DC +/-15% * Current draw: 500 mA max * Dimensions (WHD) 8.0 x 4.0 x 4.0 in. (200 x 100 x 100mm) * Weight: 1.5 lbs., 680 g.
( 4 )
$199.99
LDG Electronics Dual Analog Color Meter for FTDX-101 Transceivers
LDG Electronics Dual Analog Color Meters for Transceivers provide two 3.5 in. external meters for specific high-grade transceiver models. They display S-meter on receive, power out, PA current, SWR, ALC level, compression, supply voltages and more—dependent upon the transceiver model. What's more, these multi-function meters and the virtual meter on your radio work simultaneously. Each meter is individually backlit by an adjustable color LED, powered by any 12 Vdc, 500ma source. The color and brightness controls are on the back panel. LDG Electronics Meters are fully assembled and calibrated, and both the radio and power cables are included, so you're ready to go right out of the box! LDG Electronics Dual Analog Color Meters feature: * Dual 3.5 in. analog meters * Displays: S-Meter, RF power, SWR, etc. * Color/Brightness: Rear panel adjustment for each meter * Voltage: 13.8 V DC +/-15% * Current Draw: 500 mA max * Dimensions (WHD) 8.0 x 4.0 x 4.0 in. (200 x 100 x 100 mm) * Weight: 1.5 lbs., 680 g.
( 2 )
$199.99
LDG Electronics TW-1 Talking SWR/Wattmeters
LDG Electronics TW-1 Talking SWR/Wattmeters provide an aural spoken indication of power and SWR using a digitally recorded voice. It is ideal for the visually impaired or for those times when you need to look elsewhere while still obtaining power and SWR measurements. At the press of a button, the TW-1 speaks the forward power, reverse power or SWR. Three languages are available: English, Spanish and German and it includes an internal top firing speaker; no external audio hookups are needed. The TW-1 also offers a continuous tone mode for tuning. Simply press and hold the Forward button and a tone indicates power. As you adjust your amplifier or antenna tuner, a higher tone indicates higher power. This is perfect for peaking your amplifier while keeping a close watch on the grid current. You can select either long or short voice reports (verbose or terse modes). Long reports include descriptors like "thousand" or "hundred" and end with "forward watts" or "reverse watts". Short reports speak only the numerical value of the measurement you've selected for a quick reading. The TW-1 needs just 1W to operate, but will handle up to 2000W PEP, making it suitable for everything from QRP to full legal limit. The TW-1 is accurate to ± 5% of reading across the entire power range and resolution is 1W or 1% of reading (whichever is higher). The microprocessor controlled TW-1 can easily be upgraded in the field with a simple chip exchange. It requires 11-15VDC at 200mA maximum (power supply not included) but consumes minimal current when not speaking. Suitable for mobile use, simply install it in a convenient location near your operating position and provide 12VDC through a fused line (fuse not included, LDG recommends a 2 amp fast-blow fuse). SWR Tone mode is especially useful for tuning a "screwdriver" antenna while watching the road. (LDG strongly recommends that you pull over to a complete stop before adjusting your antenna) The November 2005 issue of QST Magazine features an exhaustive review of the TW-1 starting on page 77. Additional Features and Specifications: -Frequency Range 1.8-54.0MHz -Power rating: 0-2000W PEP, Auto-Ranging -Speech: Speaks Forward and Reverse power in watts, as well as SWR -Languages: English, Spanish, German -Continuous tone for making amplifier or tuner adjustments -Accuracy: ± 5% of reading across entire HF range (± 10% on 6M) -Power requirements: 11-15VDC at 200 mA Max (user supplies power source) -2x UHF female SO239 Connectors -2.5mm x 5.5mm Center Positive DC Power Jack - DC Power cable included!
Not Yet Reviewed
$219.99
LDG Electronics Z-100A Automatic Antenna Tuners
The LDG Electronics Z-100A Automatic Antenna Tuner comes with a standard DC cable for use with any transceiver, and three of the most popular transceiver interface cables. Z-100A tuners feature LDG's famous 10:1 SWR tuning range that matches Dipoles, Verticals, End-Fed Half-Waves (EFHW), G5RVs and even Off Center Fed dipoles and Windham antennas. Easy integration with dozens of modern transceivers means plug-and-play operation could not be simpler. The updated compact and lightweight tuner goes anywhere with any HF radio—desktop, portable, parks, islands, or tall summits. The Z-100A Automatic Antenna Tuner works with all HF radios up to 125 watts RF output (30 watts digital) and can be interfaced with dozens of modern transceivers. An interface cable isn't required for semi-automatic operation. Whether or not the Z-100A tuner is interfaced with the transceiver, it has an internal frequency counter and 2,000 memories to store each operating frequency with antenna tuning parameters. Memory retuning occurs in only 100 milliseconds, with the initial full tuning cycle requiring an average of only 6 seconds. For use with radios that are not control interfaced, including Elecraft and FlexRadio, supply DC to the Z-100A tuner with the IC-104 cable. Simply key up the radio with a low power carrier, push the TUNE button on the Z-100A, and the built-in frequency counter initiates the tuning cycle. Also included with the LDG-Z-100A are three interface cables that are compatible with many modern Yaesu and Icom transceivers. Here is a listing of interface cables, compatible transceivers and how the tuner functions with each group of transceivers: - Press TUNE Button on Radio or Tuner – Interface keys radio automatically: IC-100 Cable (included) - ICOM AH-3 or AH-4 Compatible (See Navigation at LDG-IC-100 for listing of applicable ICOM models) - Press Button on Tuner – Interface keys the radio at low power automatically: IC-108 Cable (included with LDG-Z-100A) - Yaesu FT-710, FT-891, FT-991A, FT-991, FT-857/D, -897/D, -100/D IC-109 Cable (included with LDG-Z-100A) - Yaesu FTdx10, FTDX-1200, FT-950, FT-450 (10-pin mini-DIN LINEAR Port must be used on these models) IC-115 Cable (optional) - Yaesu FTDX-101D, FTDX-3000 IC-105 Cable (optional)- Alinco EDX-2 Compatible, DX-70, DX-77 - Key Radio (low power carrier) and Press Button on Tuner: IC-106 Cable (optional)- KENWOOD AT-300 Compatible (See Applications tab for all Kenwood models) IC-105 Cable (optional)- ALINCO SR8T, SR9T - Power Only – Key Radio (low power carrier) and Press Button on Tuner for semi-automatic tuning operation with any HF transceiver up to 125W SSB/CW, 30W Digital: IC-104 Cable (Included with LDG-Z-100A) - Power, Ground, Key, Start LDG Electronics Z-100A Automatic Antenna Tuner Specifications: Frequency Range: 1.8 to 54MHz Power: 125W PEP SSB and CW, 30W Digital (including FT8, RTTY, etc.) Input Impedance: 50-ohm Connectors: SO-239/UHF Female Tuning Range: 10:1 SWR, 3:1 on 6M Memories: 2000 Retune Time: Less than 1.0 second Voltage: 13.8VDC +/-15% Current Draw: 500mA tuning, 20mA idle Dimensions (WHD): 6.30 x 1.50 x 6.30in., 160 x 40 x 160mm Weight: 1.50lbs., 680g LDG continues to set new standards for auto-tuners and accessories in amateur radio service. LDG Electronics is a family-owned and operated company dedicated to bringing innovative, quality products to the amateur market. Their focus is anticipating and meeting customer needs and providing world-class support.
( 1 )
$199.99
LDG Electronics Dual Analog Color Meter for IC-7800 Transceivers
LDG Electronics Dual Analog Color Meters for Transceivers provide two 3.5 in. external meters for four specific high-grade transceiver models. They display S-meter on receive, power out, PA current, SWR, ALC level, compression, supply voltages and more—dependent upon the transceiver model. What's more, these multi-function meters and the virtual meter on your radio work simultaneously Each meter is individually backlit by an adjustable color LED, powered by any 12 Vdc, 500ma source. The color and brightness controls are on the back panel. LDG Electronics Meters are fully assembled and calibrated, and both the radio and power cables are included, so you're ready to go right out of the box! LDG Electronics Dual Analog Color Meters feature: * Dual 3.5 in. analog meters * Displays: S-Meter, RF power, SWR, etc. * Color/Brightness: Rear panel adjustment for each meter * Voltage: 13.8 V DC +/-15% * Current draw: 500 mA max * Dimensions (WHD) 8.0 x 4.0 x 4.0 in. (200 x 100 x 100mm) * Weight: 1.5 lbs., 680 g.
( 1 )
$199.99