Selected Filters


Filters


SO9I Engineering Antenna Switches, Remote

Part Groups

Results 1 - 2 of 2

SO9I Engineering HamCore 6X1 Antenna Switch

The SO9I Engineering HamCore 6X1 Antenna Switch is a network-controlled RF antenna switch that allows a single transceiver to be connected to as many as six antennas directly from a web browser. The automation, control interface and radio integration is all built directly into the switch itself. There is no separate controller box, no proprietary control cable, and no software to install. HamCore connects to your shack network over Ethernet or WiFi and is operated entirely through a standard web browser, from a laptop, tablet or phone. It reads the operating frequency and PTT status from your transceiver or logging software and switches antennas automatically as you change bands — while a manual mode remains available for direct control at any time. Typical Applications: HF contesting & DXing — automatic, hands-free antenna selection as you move across bands Compact and portable stations — one device, one power connection, no controller to rack up separately Field Day / remote operation — Access Point mode lets you configure and control HamCore with no other network infrastructure present FlexRadio and SmartSDR stations — direct TCP/IP integration reads frequency and PTT with no extra cabling NOTE: HamCore 6×1 is designed for indoor or sheltered installation. For outdoor mounting it must be fitted inside an additional weatherproof enclosure. Additional Features & Specifications: Characteristic Impedance: 50 &#937; Antenna Ports: 6 (ANT 1–ANT 6) Radio Ports: 1 (INPUT) Maximum Power: 4,000 W PEP (CW/SSB) @ SWR < 1.5:1 Insertion Loss: < 0.1 dB Maximum SWR: 1.12:1 Isolation Between Radio Ports: > 80 dB (6×2 version, between R1 and R2) RF Connectors: UHF SO-239 Power Supply: 12 VDC nominal (11–15 VDC operating range) Power Input Options: DC barrel jack or passive PoE over the LAN cable Power Connector: 5.5 × 2.5 mm DC barrel jack, center-positive Network Connectivity: Ethernet (RJ45), WiFi client, or built-in Access Point WiFi Band: 2.4 GHz Communication Medium: WiFi or LAN Control Interface: Built-in web server accessible from any modern web browser; no app required Control Modes: Manual or automatic operation Automatic Antenna Selection: Supports hands-free antenna switching when integrated with FlexRadio (TCP/IP) or compatible logging software PTT Input: 1 × RCA jack (radio TX-GND signal) Radio Integration: FlexRadio (TCP/IP) or logging software for automatic frequency-based antenna selection Interlock Protection: Hardware and software interlocks prevent two radios from being connected to the same antenna simultaneously Unused Antenna Protection: Unselected antenna ports are automatically grounded Deployment Flexibility: Operates without an internet connection or router using the built-in WiFi Access Point or direct Ethernet connection; ideal for portable, off-grid, and emergency communications SO2R / Multi-Operator Support: Designed for Single Operator Two Radio (SO2R) and multi-operator station configurations Enclosure: Powder-coated steel with black finish Dimensions (W × H × D): 7.1 × 5.8 × 3.1 in (180 × 148 × 78 mm) Weight: 3.4 lbs. (1.53 kg) Ingress Protection: Indoor use only; not weatherproof

Not Yet Reviewed

$309.99

SO9I Engineering HamCore 6X2 Antenna Switch

The SO9I Engineering HamCore 6X2 Antenna Switch is a network-controlled RF antenna switch built for two-radio stations — SO2R and Multi-Operator setups — routing two independent transceivers across up to six shared antennas. The automation, control interface and radio integration are all built directly into the switch itself: there is no separate controller box, no proprietary control cable, and no software to install. HamCore connects to your shack network over Ethernet or WiFi and is operated entirely through a standard web browser, from a laptop, tablet or phone. It reads the operating frequency and PTT status from each radio independently and switches antennas automatically as each operator changes bands. Built-in protection prevents one radio from grabbing an antenna the other operator is already using. Proven Performer at WRTC 2026 HamCore 6×2 performed excellently at the World Radiosport Team Championship 2026 — the highest level of amateur radio competition — despite challenging outdoor field conditions and unstable power from a generator. Typical Applications SO2R Contesting: One operator running two radios, with automatic protection against both radios landing on the same antenna Multi-Operator Stations: Two independent operating positions sharing one antenna farm Compact Two-radio Setups: One device, one power connection, no controller to rack up separately FlexRadio and SmartSDR Stations: Direct TCP/IP integration reads frequency and PTT per radio with no extra cabling NOTE: HamCore 6×2 is designed for indoor or sheltered installation. For outdoor mounting it must be fitted inside an additional weatherproof enclosure. Included Components: - SO9I HamCore 6x2 Antenna Switch - 12VDC Power Adapter - LAN (Ethernet Cable) - WiFi Antenna (SMA) Additional Features & Specifications: Characteristic Impedance: 50-Ohms Antenna Ports: 6 (ANT 1–ANT 6) Shared between both transceivers Radio Ports: 2 R1 & R2 (INPUT) Maximum Power: 4,000 W PEP (CW/SSB) @ SWR < 1.5:1 Insertion Loss: < 0.1 dB Maximum SWR: 1.12:1 Isolation Between Radio Ports: > 80 dB (6×2 version, between R1 and R2) RF Connectors: UHF SO-239 Power Supply: 12 VDC nominal (11–15 VDC operating range) Power Input Options: DC barrel jack or passive PoE over the LAN cable Power Connector: 5.5 × 2.5mm DC barrel jack, center-positive Network Connectivity: Ethernet (RJ45), WiFi client, or built-in Access Point WiFi Band: 2.4 GHz Communication Medium: WiFi or LAN Control Interface: Built-in web server accessible from any modern web browser; no app required Control Modes: Manual or automatic operation Automatic Antenna Selection: Supports hands-free antenna switching when integrated with FlexRadio (TCP/IP) or compatible logging software PTT Input: 2 × RCA jacks, TX-GND signal (PTT R1, PTT R2 One per radio) Radio Integration: FlexRadio (TCP/IP) or logging software for automatic frequency-based antenna selection Interlock Protection: Hardware and software interlocks prevent two radios from being connected to the same antenna simultaneously Unused Antenna Protection: Unselected antenna ports are automatically grounded Deployment Flexibility: Operates without an internet connection or router using the built-in WiFi Access Point or direct Ethernet connection; ideal for portable, off-grid, and emergency communications SO2R / Multi-Operator Support: Designed for Single Operator Two Radio (SO2R) and multi-operator station configurations Enclosure: Powder-coated steel with black finish Dimensions (W × H × D): 10.43 × 6.30 × 3.0 in. (265 × 160 × 76mm) Weight: 5.5 lbs. (2.5kg) Ingress Protection: Indoor use only; not weatherproof

Not Yet Reviewed

$659.99

  • 1
  • Page 1 of 1