Filters
Yaesu Base Transceivers
Yaesu FT-991A HF/VHF/UHF Multi-Mode Transceivers
Yaesu FT-991A HF/VHF/UHF Multi-Mode Transceivers are the latest generation in all mode, all band MF/HF/VHF/UHF transceiver with C4FM (System Fusion) Digital capability. FT-991A transceivers include multi-mode operation on CW, AM, FM, SSB, and Digital Modes (Packet, PSK31, RTTY and C4FM), with 100 Watts of HF/50 MHz capability (50 Watts VHF/UHF). These superior-performance transceivers include a high-resolution full-color 3.5 in. TFT touch panel for exceptional operability and visibility. This "A" version of the FT-991 also includes two new exciting and useful advanced features - a Real-Time Spectrum Scope and a Multi-Color Waterfall Display. The new dynamic real-time spectrum scope gives radio operators the ability to graphically view the location of signals on the band while they listen to the received audio, allowing them to quickly move to the desired signal. The strength of signals on the band can readily be seen on the Multi-Color Waterfall Display. Chronological order color differentiation allows operators to easily recognize weak signals at a glance; signals that might otherwise be missed on the spectrum scope. FT 991As feature a rugged state-of-the-art highly balanced receiver circuit configuration. The high-speed floating point DSP from Texas Instruments used in the receiver design guarantees excellent interference rejection with actual signals under real-world conditions, not only on HF but also in the VHF and UHF bands. The 1st IF frequency incorporates selectable robust 3 kHz and 15 kHz roofing filters that effectively attenuate interfering signals. The triple conversion circuit structure allows highly flexible gain distribution at each stage. These FT-991A transceivers could not provide functions easier than at your fingertips with their 3.5 in. full color TFT display for superior operability and visibility. These rigs can be connected to a computer using a USB cable for CAT control and firmware updates, or the use of an optional SCU-17 Interface Unit to support USB Audio In/Out, TX Control (PTT, Key, and Shift). The RF amplifier in FT-991A transceivers provides a clean and solid 100 Watts of power (50 Watts VHF/UHF) and is combined with a large heat-sink and forced air automatic cooling fan to increase operating time and prevent overheating. These radios are a compact, lightweight chassis suitable for portable, mobile and base installations. Measuring 8.8 W x 3 H x 9.9 in. deep at just 9.7 pounds, this robust full-featured mobile/portable radio is ready to go when and where you are! The integral internal high-speed Automatic Antenna Tuner included in the transceiver uses an LC switching network that has a large-capacity 100 channel memory. The tuning data is automatically memorized to reduce tuning time when changing frequency. A plus/minus 0.5ppm High Resolution DDS/PLL Local Oscillator included as part of the standard radio package. Yaesu FT-991A Transceiver Specifications: * Frequency Ranges: RX 30 kHz - 56 MHz, 118 MHz - 164 MHz, 420 MHz - 470 MHz (specified performance, amateur bands only) * TX 1.8 MHz - 54 MHz, 144 MHz - 148 MHz, 430 MHz - 450 MHz (amateur bands only) * Circuit Type: Triple-Conversion Superheterodyne: SSB/CW/AM * Double-Conversion Superheterodyne: FM/C4FM * Modulation Type: A1A(CW), A3E(AM), J3E(LSB, USB), F7W(C4FM), F3E(FM), F1D(PACKET), F2D(PACKET) * Power Output: SSB/CW/FM - AM Carrier * 160 - 6 Meters: 100 - 25 W * 2 Meters/70 Centimeters: 50 - 12.5 W * Weight: 9.5 lbs. * Yaesu Warranty: 3 Years Supplied Accessories * Hand Microphone (MH-31A8J) * DC Power Cord * Spare Fuse (25A) * Operating Manual * Warranty Card Please view the Yaesu information for this product by clicking on the "Documentation" tab. When you are looking for a great Amateur Radio transceiver, consider one of these fine Yaesu FT-991A HF/VHF/UHF Multi-Mode Transceivers from DX Engineering!
( 233 )
$1,449.95
Instant Rebate
Yaesu FT-710 AESS HF/50 MHz Base/Portable Transceivers w/SP-40 Speaker
The magnificent new Yaesu FT-710 AESS HF/50 MHz SDR Transceivers represent the latest in SDR transceiver technology from Yaesu. This transceiver covers the HF Amateur Radio bands, 160 through 6 meters in a compact design that is perfect for portable operations, but equally suitable as a base station in the shack. The FT-710 AESS model includes the Acoustic Enhancement Speaker System (AESS) and features a large 4.3 inch, high-resolution TFT color multi-function touchscreen display which yields intuitive management of system settings and functions. Large control dials and the ergonomically designed layout of the front panel make the FT-710 easy to navigate. The real-time spectrum scope display adopts the FTDX series SDR 3D scope 3DSS (3 Dimensional Spectrum Stream)[RE1] to visualize changes in signal strengths within the bands.
( 84 )
$1,099.95
Instant Rebate
Yaesu FTDX10 Compact HF/50 MHz 100W SDR Transceivers
The exciting Yaesu FTDX10 Compact HF/50 MHz 100 W SDR Transceiver utilizes the Yaesu Hybrid SDR configuration - Narrow Band SDR and Direct Sampling SDR - like the FTDX101 series. The Narrow band SDR receiver emphasizes excellent receiver performance, while the Direct Sampling SDR provides a Digital Processing Real-Time Spectrum Scope. This stylish and well equipped model sets a new performance standard for the "affordable class" transceiver. Great for base and portable operations, the Yaesu FTDX10 is ready to order from DX Engineering. Click "More Details" for Features and Specifications Main Features of the Yaesu FTDX10 Compact HF/50 MHz 100W SDR Transceiver: - Narrow Band SDR with 3 types of roofing filters and phenomenal multi-signal receiving characteristics, as in the FTDX-101 series. The Down Conversion type receiver configuration with the first IF at 9 MHz has been adopted for the FTdx10. Excellent narrow bandwidth crystal roofing filters have the desired sharp "cliff edge" shape factor. Thanks to the Narrow Band SDR's latest circuit configuration including 500 Hz, 3 kHz and 12 kHz roofing filters and low-noise oscillator, the RMDR (Reciprocal Mixing Dynamic Range) reaches 116 dB or more, the close-in BDR (Blocking Dynamic Range) reaches 141 dB or more and 3rd IMDR (third-order Intermodulation Dynamic Range) reaches 109 dB or more in the 14 MHz band at 2 kHz separation. - 250MHz HRDDS (High Resolution Direct Digital Synthesizer) affords quiet and clear reception The local circuit of the new FTdx10 uses 250MHz HRDDS method same as the FTdx-101 series. Thanks to its characteristics that improve the C/N (carrier to noise) ratio and the careful selection of components in the design, the phase noise characteristic of the local signal achieves an excellent value of -145 dB or less in 14 MHz at 2 kHz separation. - 3DSS (3-Dimensional Spectrum Stream) on the 5-inch Full-Color TFT Display with Touch-Panel functionality The 5-inch Full-Color panel shows the 3DSS display. By touching the frequency display, the numeric keypad is displayed and the active band and frequency adjustment can be set by direct input. Frequency setting and adjustment can also be performed by turning the MAIN dial or touching the scope display. Similar to the FTdx-101 series, the MULTI display, RX operation status display, Center, FIX and Cursor modes are available. - Front Panel Designed for Superior Operating Efficiency - MPVD (Multi-Purpose VFO Outer Dial), is a large multi-purpose ring around the outside of the VFO dial that enables control of Clarifier, C/S (custom selection function) and recall of memory channels. - Remote Operation with optional LAN unit (SCU-LAN10) is possible with the optional SCU-LAN10 and SCU-LAN10 Network Remote Control Software. In addition to controlling the transceiver basic operations, the versatile scope displays enable sophisticated operations such as monitoring the band conditions on a large display at a location away from the ham shack by connection to a home LAN network. Additional features of the compact Yaesu FTDX10 include: - 15 separate band pass filters - Effective QRM rejection with the IF DSP (IF SHIFT/WIDTH, IF NOTCH DNF, DNR, CONTOUR) - High-quality and super stable final amplifier utilizing the new push-pull MOSFET RD70HUP2 - Aluminum Heat Sink with 80 mm low-noise axial flow cooling fan - High Speed Automatic Antenna Tuner with a large capacity 100-channel memory - RF & AF Transmit Monitor - Microphone Amplifier with Three-stage parametric Equalizer (SSB/ AM mode) - QMB (Quick Memory Bank) - Band Stack Function - Optional speaker – SP-30 designed for the new FTDX10 - Optional 300 Hz Plug-In Roofing Filter– XF-130CN
( 167 )
$1,499.95