Yaesu Radio Transceivers, Microphones, Tuners & More

Yaesu ATAS-120A Auto Active Tuning Antennas

Yaesu's patented ATAS™ Active Tuning Antenna System has been enhanced with the latest model: ATAS-120A. This is a unique mobile antenna that provides HF, VHF and UHF coverage with automatic motorized tuning. Designed for use exclusively with Yaesu transceivers that support ATAS, microprocessor controlled voltages are sent on the coaxial cable to adjust the antenna radiator length for best SWR. Yaesu ATAS-120A active tuning antennas cover the 7, 14, 21, 28, 50, 144 and 430 MHz Amateur bands and are compatible with the Yaesu FTX-1, FT891, FTDX-10, FT-710, FT-991A, FT-991, FT-857D, FT-897D, FT-100, FT-100D and the FT-450D. They are typically attached to a vehicle hatch or trunk lip UHF mount (not supplied), also available from DX Engineering. The ATAS-120A antennas were designed for mobile use, however they can be adapted for base, or portable operation with the appropriate mount and a substantial counterpoise radial wire system. Specifications of the Yaesu ATAS-120A Auto Active Tuning Antennas: * Operational Bands: 40, 20, 15, 10, 6 and 2 meters and 70 cm * Height, appx.: 4.59 to 5.25 ft. * Weight, appx.: 1.98 lbs. * Input Impedance: 50 ohms * Maximum Power: 120 Watts, SSB, CW, 50 percent duty cycle * Matched SWR: Less than 2.0:1 with proper grounding or counterpoise As with any HF, VHF and UHF mobile antenna, performance depends upon the grounding of the mount and bonding to the metal vehicle surfaces to create an optimal ground plane. Portable VHF and UHF operation is made possible with the addition of the optional Yaesu ATBK-100 Antenna Base Kit. This kit is not required, nor should it be used, for mobile operation. Operational convenience and performance is available for your Yaesu HF, VHF and UHF Mobile Transceiver. Order Yaesu ATAS-120A Active Tuning Antennas from DX Engineering.

4.76 out of 5 stars ( 50 )

$449.99

Yaesu G-800DXA Medium Heavy-Duty Rotator Systems

Yaesu G-800DXA Medium Heavy-Duty Rotator Systems are azimuth positioners designed to rotate large tower-mounted amateur and professional antenna arrays under remote control from the station's operating position. These systems feature attractive compass-dial position indication controllers, with a connector port for optional computer interface for automated directional antenna positioning control. Yaesu's G-800DXA rotator design utilizes 98 heavy 3/8 in. dual-stacked circumferential ball bearings to distribute load over the full diameter of the housing. This design minimizes stress and wear and practically eliminates the possibility of destructive water entry: There is no shaft hole in the top of the housing. Instead of the usual AC motor drive used in older rotator designs, the G-800DXA use a variable-voltage DC motor, removing the need for a large starting capacitor with its potential for failure exposed to outside temperature variations. The factory-lubricated rotator unit is housed in melamine resin-coated die-cast aluminum, intended to provide maintenance-free operation under all climatic conditions. A mast alignment gauge on the rotator housing simplifies accurate mechanical alignment during installation. Tower mounted, this model handles over 20 sq. ft. of antenna wind load and over 400 lbs. of vertical mast load. Installation is required for included plug connectors on to the installer supplied 6-conductor control cable; 20 AWG for lengths less than 125 ft. and 18 AWG over 125 ft. Console power is 117 volts AC for units sold in the USA. The handsome desktop controller provides 360 degrees radial indication of actual antenna azimuth bearing. You can select rotation time over 360 degrees from 40 to 100 seconds on the G-800DXA, and preset a desired heading for the rotator, to which it then turns automatically. The operator may select the stop heading, the compass bearing through which the rotator cannot be turned, which is most convenient for their station location and operation, allowing full rotation through north, south or both, if desired. In any case, 90 degrees overlapping rotation allows rotation through the selected stop heading for 450 degrees of total rotation. These rotators are intended for mounting to an accessory shelf inside a support tower (not supplied), at least 1-meter (40 in.) below the top of the tower. Yaesu rotators have a fine reputation within the Amateur Radio community. When installing a new tower, or replacing an old rotator, consider purchasing a Yaesu G-800DXA Medium Heavy-Duty Rotator System from DX Engineering.

4.78 out of 5 stars ( 23 )

$659.99

Yaesu G-5500DC Azimuth-Elevation Rotator Systems

Yaesu G-5500DC Azimuth-Elevation Rotator Systems are specially designed to accommodate horizontal cross-booms to mount pairs of VHF and UHF directional antennas for space communications. Providing simultaneous control of 450 degrees of azimuth rotation and 180 degrees of elevation rotation, they are perfect for EME (moon bounce) and satellite communications installations. The G-5500DC dual controller lets you adjust and keep track of both aspects of the antenna system's positioning. The 120 VAC controller includes an interface jack for computer control, supported by the optional GS-232A Computer Controller, as well as many aftermarket control programs and interfaces. These azimuth and elevation rotators are actually two separate motor units, now DC controlled. They may be mounted together on a mast with the included mast bracket, or independently with the azimuth rotator inside a tower and the elevation rotator mounted on the mast above the top of the tower. They handle a total of about 10 sq. ft. of antenna wind load and rotate each way in about one minute. The Yaesu G-5500 AZ-EL clamshell rotator design utilizes 98 heavy 7/16-inch dual-stacked circumferential ball bearings to distribute load over the full diameter of the housing. This design minimizes stress and wear, and practically eliminates the possibility of destructive water entry: there is no shaft hole in the top of the housing. Yaesu's factory-lubricated rotator units are housed in Melamine resin-coated die-cast aluminum intended to provide maintenance-free operation under all climatic conditions. IMPORTANT NOTE: Beginning in 2019 the new Yaesu G-5550DC azimuth and elevation motors operate with two independent 22 V DC control lines, each a five-wire system, using the same connectors at the end of the control cable as the previous models. Both of the new DC motors, azimuth, and elevation, are marked "G-5550DC" at the connector. Be sure to mark your connectors AZ or EL. The rear panel of the controller is titled "G-5500DC" on the serial number label. WARNING: The legacy Yaesu G-5500 Rotator motors and controller used a 26 VAC control voltage, six-wire system. Therefore, old AC controllers are NOT compatible with new DC rotator motors, and new DC controllers are not compatible with old AC rotator motors. All control cable assemblies for all modern Yaesu rotator systems use the same connectors with "1 to 1 pin-out" connector wiring. Therefore, older cable assemblies are compatible with the new Yaesu G-5500DC components, which only use pins 1, 2, 3, 4 and 5 in each connector. For control cable runs less than 125 ft. use five-conductor, 20 gauge control cable (5 x 20 AWG). If the rotator cable needs to be longer than 125 ft. then use five-conductor 18 gauge cable (5 x 18 AWG). The input voltage for the G-5500DC controller is labeled "117 VAC" to indicate house current range of 110 to 120 Vac. When you are launching your EME or satellite communications adventure, an azimuth/elevation combination rotator is a vital tool for your antenna system. As durable as they are attractive, Yaesu G-5500DC Azimuth-Elevation Rotator Systems are available from DX Engineering.

4.65 out of 5 stars ( 17 )

$969.99

Instant Rebate

Yaesu FT-65R 144/430 MHz Dual-Band HTs

Yaesu FT-65R 144/430 MHz Dual-Band HTs are very compact, ruggedly constructed handheld VHF/UHF rigs with three selectable power settings of 5W, 2.5W, or 0.5W. Their big front panel speaker provides a full 1 watt of crisp, clear audio. These units come supplied with a 1950mAh Li-ion battery pack capable of providing over 9 hours of operation. An optional, higher-capacity 2500mAh Li-ion battery is available for over 11.5 hours of operating time. A 2.5 hour rapid charger comes standard, making the transceiver ready to operate at any time. Yaesu's newly designed large, white LED displays are vibrant and highly visible. Four Quick Recall Keys (QRK) are user programmable to instantly recall favorite channels with just the push of a button. Other useful features include: versatile scanning capabilities, such as Programmable VFO Scan, Memory Scan, Priority Channel Scan, and Weather Alert Scan; WX Channels with "Severe Weather" Alert, PC Programming, Transceiver-to-Transceiver Cloning, FM Broadcast Receiver, Automatic Range Transponder System (ARTS), CTCSS/ DCS Operation, Busy Channel Lockout (BCLO), Automatic Power Off feature, and Transmitter Time Out Timer (TOT). VOX operation is available with the optional Earpiece Microphone SSM-512B. * Commercial Grade VHF / UHF: FT-65R transceivers are built to commercial grade standards, including their IP54 Rating for Dust and Water protection. MIL-810-C, D and E standards make these radios suitable for operation in the harshest of environments. * Powerful Output: With 5 Watts of reliable RF output power, this radio is sure to be heard. Never miss a call with One Watt of crisp, clear audio output from the oversized front panel speaker. * High Capacity Li-Ion battery: FT-65R transceivers are packaged with a powerful 1950 mAh Li-Ion battery pack, providing the radio with over 9 hours of operating time. Or upgrade to the optional high-capacity 2500 mAh Li-Ion battery pack for over 11.5 hours of extended operating time. To ensure minimal down time, FT-65R transceivers also come packaged with a 3.5-Hour rapid charger. * QRK (Quick Recall Key): Four Dedicated User-programmable Keys serve as shortcut keys to preferred menu options, or use the four dedicated recall keys to easily store and recall desired frequencies. * Versatile Scanning Capabilities: Programmable VFO Scan scans all channels in the desired frequency range; Memory Scan allows scanning of user selectable frequencies; Priority Channel Scan can be used to scan memory channels while making one channel a priority. Weather Alert Scan alerts the user when severe weather is approaching. * PC Programmable: These radios are capable of being programmed directly from a PC, making all of the advanced setup features a breeze! Use the optional software and SCU-35 programming cable to make programming a snap. * More advanced features: Tons of advanced features are loaded into this compact radio, including: Transceiver to Transceiver cloning with the optional SCU-36 clone cable, FM Band receiver equipped, ARTS (Automatic Range Transponder System), DTMF operation, CTCSS/DCS operation, TOT (time out timer), and more. Note: For additional information, please look at the files under the "Documentation" tab. For really versatile dual-band FM operation, consider one of these Yaesu FT-65R 144/430 MHz Dual-Band HTs from DX Engineering!

4.71 out of 5 stars ( 105 )

$119.95

Yaesu FT-991A HF/VHF/UHF Multi-Mode Transceivers

Yaesu FT-991A HF/VHF/UHF Multi-Mode Transceivers are the latest generation in all mode, all band MF/HF/VHF/UHF transceiver with C4FM (System Fusion) Digital capability. FT-991A transceivers include multi-mode operation on CW, AM, FM, SSB, and Digital Modes (Packet, PSK31, RTTY and C4FM), with 100 Watts of HF/50 MHz capability (50 Watts VHF/UHF). These superior-performance transceivers include a high-resolution full-color 3.5 in. TFT touch panel for exceptional operability and visibility. This "A" version of the FT-991 also includes two new exciting and useful advanced features - a Real-Time Spectrum Scope and a Multi-Color Waterfall Display. The new dynamic real-time spectrum scope gives radio operators the ability to graphically view the location of signals on the band while they listen to the received audio, allowing them to quickly move to the desired signal. The strength of signals on the band can readily be seen on the Multi-Color Waterfall Display. Chronological order color differentiation allows operators to easily recognize weak signals at a glance; signals that might otherwise be missed on the spectrum scope. FT 991As feature a rugged state-of-the-art highly balanced receiver circuit configuration. The high-speed floating point DSP from Texas Instruments used in the receiver design guarantees excellent interference rejection with actual signals under real-world conditions, not only on HF but also in the VHF and UHF bands. The 1st IF frequency incorporates selectable robust 3 kHz and 15 kHz roofing filters that effectively attenuate interfering signals. The triple conversion circuit structure allows highly flexible gain distribution at each stage. These FT-991A transceivers could not provide functions easier than at your fingertips with their 3.5 in. full color TFT display for superior operability and visibility. These rigs can be connected to a computer using a USB cable for CAT control and firmware updates, or the use of an optional SCU-17 Interface Unit to support USB Audio In/Out, TX Control (PTT, Key, and Shift). The RF amplifier in FT-991A transceivers provides a clean and solid 100 Watts of power (50 Watts VHF/UHF) and is combined with a large heat-sink and forced air automatic cooling fan to increase operating time and prevent overheating. These radios are a compact, lightweight chassis suitable for portable, mobile and base installations. Measuring 8.8 W x 3 H x 9.9 in. deep at just 9.7 pounds, this robust full-featured mobile/portable radio is ready to go when and where you are! The integral internal high-speed Automatic Antenna Tuner included in the transceiver uses an LC switching network that has a large-capacity 100 channel memory. The tuning data is automatically memorized to reduce tuning time when changing frequency. A plus/minus 0.5ppm High Resolution DDS/PLL Local Oscillator included as part of the standard radio package. Yaesu FT-991A Transceiver Specifications: * Frequency Ranges: RX 30 kHz - 56 MHz, 118 MHz - 164 MHz, 420 MHz - 470 MHz (specified performance, amateur bands only) * TX 1.8 MHz - 54 MHz, 144 MHz - 148 MHz, 430 MHz - 450 MHz (amateur bands only) * Circuit Type: Triple-Conversion Superheterodyne: SSB/CW/AM * Double-Conversion Superheterodyne: FM/C4FM * Modulation Type: A1A(CW), A3E(AM), J3E(LSB, USB), F7W(C4FM), F3E(FM), F1D(PACKET), F2D(PACKET) * Power Output: SSB/CW/FM - AM Carrier * 160 - 6 Meters: 100 - 25 W * 2 Meters/70 Centimeters: 50 - 12.5 W * Weight: 9.5 lbs. * Yaesu Warranty: 3 Years Supplied Accessories * Hand Microphone (MH-31A8J) * DC Power Cord * Spare Fuse (25A) * Operating Manual * Warranty Card Please view the Yaesu information for this product by clicking on the "Documentation" tab. When you are looking for a great Amateur Radio transceiver, consider one of these fine Yaesu FT-991A HF/VHF/UHF Multi-Mode Transceivers from DX Engineering!

4.83 out of 5 stars ( 233 )

$1,449.95

Yaesu VX-6R 2m/220/70cm FM Heavy-Duty Tri-Band Ultra-Compact FM HTs

Yaesu VX-6R 2m/220/70cm FM Heavy-Duty Tri-Band Ultra-Compact FM HTs are ideal for rigorous field use! With wide-band reception, rugged and submersible design and simple keyboard commands, these Yaesu VX-6R Transceivers are loaded with features. As a bonus, these USA-version radios transmit on 222-225 MHz with 1.5 watts output!

4.72 out of 5 stars ( 60 )

$299.99

Yaesu G-450ADC Medium-Duty Rotator Systems

Yaesu G-450ADC Medium-Duty Rotator Systems are the entry-level rotator and controller that are perfect for small HF beams, a tri-bander or VHF and UHF antennas up to about 10 sq. ft. of tower-mounted wind load. A lesser wind load of about 5 sq. ft. can be handled when mounting the G-450ADC on top of a mast with the optional lower mast bracket, GC-038. Rotate Amateur and professional antennas with the Yaesu's handsome 120 Vac desktop remote control console, featuring a compass-style indicator at the station operating position. The G-450ADC rotator system provides 450 degrees of azimuth rotation in just over one minute. The rotator handles masts of 1.25 to 2.48 in. outside diameter and, when tower mounted, a total vertical mast load up to 200 lbs. In the Yaesu G-450ADC, the clamshell rotator design utilizes 98 heavy 7/16-inch dual-stacked circumferential ball bearings to distribute load over the full diameter of the housing. This design minimizes stress and wear, and practically eliminates the possibility of destructive water entry: there is no shaft hole in the top of the housing. Yaesu's factory-lubricated rotator units are housed in Melamine resin-coated die-cast aluminum intended to provide maintenance-free operation under all climatic conditions. IMPORTANT NOTE: Beginning in 2019 the new Yaesu G-450ADC Rotator motors and controllers operate with a 20 V DC control voltage, four-wire system, using the provided connectors to be installed at each end of the user supplied control cable, same as the previous models. For clarity, the new DC rotator motors are marked "G-450DC" at the connector. The rear panel of the controller is titled "G-450ADC" on the serial number label. WARNING: The legacy Yaesu G-450A Rotator motors and controllers used a 26 VAC control voltage, five-wire system. Therefore, old AC controllers are NOT compatible with new DC rotator motors, and new DC controllers are not compatible with old AC rotator motors. All control cable assemblies for all modern Yaesu rotator systems use the same connectors with "1 to 1 pin-out" connector wiring. Therefore, older cable assemblies are compatible with the new Yaesu G-450ADC components, which only use pins 2, 3, 4 and 5 in each connector. For control cable runs less than 125 ft. use four-conductor, 20 gauge control cable (4 x 20 AWG). If the rotator cable needs to be longer than 125 ft., then use four-conductor 18 gauge cable (4 x 18 AWG). The input voltage for the G-450ADC controller is labeled "117 VAC" to indicate house current of 110 to 120 Vac. When you need a medium-duty rotator system, which is durable and attractive, order a new Yaesu G-450ADC Medium-Duty Rotator System from DX Engineering.

4.5 out of 5 stars ( 46 )

$429.99

Yaesu G-1000DXA Heavy-Duty Rotator Systems

Yaesu G-1000DXA Heavy-Duty Rotator Systems are azimuth positioners designed to rotate large tower-mounted amateur and professional antenna arrays under remote control from the station's operating position. These systems feature attractive compass-dial position indication controllers, with a connector port for optional computer interface for automated directional antenna positioning control. Yaesu's G-1000DXA rotator design utilizes 98 heavy 3/8 in. dual-stacked circumferential ball bearings to distribute load over the full diameter of the housing. This design minimizes stress and wear and practically eliminates the possibility of destructive water entry: There is no shaft hole in the top of the housing. Instead of the usual AC motor drive used in older rotator designs, the G-1000DXA use a variable-voltage DC motor, removing the need for a large starting capacitor with its potential for failure exposed to outside temperature variations. The factory-lubricated rotator unit is housed in melamine resin-coated die-cast aluminum, intended to provide maintenance-free operation under all climatic conditions. A mast alignment gauge on the rotator housing simplifies accurate mechanical alignment during installation. Tower mounted, this model handles over 23 sq. ft. of antenna wind load and over 400 lbs. of vertical mast load. Installation is required for included plug connectors on to the installer supplied 6-conductor control cable; 20 AWG for lengths less than 125 ft. and 18 AWG over 125 ft. Console power is 117 volts AC for units sold in the USA. The handsome desktop controller provides 360 degrees radial indication of actual antenna azimuth bearing. You can select rotation time over 360 degrees from 40 to 100 seconds on the G-1000DXA, and preset a desired heading for the rotator, to which it then turns automatically. The operator may select the stop heading, the compass bearing through which the rotator cannot be turned, which is most convenient for their station location and operation, allowing full rotation through north, south or both, if desired. In any case, 90 degrees overlapping rotation allows rotation through the selected stop heading for 450 degrees of total rotation. These rotators are intended for mounting to an accessory shelf inside a support tower (not supplied), at least 1-meter (40 in.) below the top of the tower. Yaesu rotators have a fine reputation within the Amateur Radio community. When installing a new tower, or replacing an old rotator, consider purchasing a Yaesu G-1000DXA Heavy-Duty Rotator System from DX Engineering.

5.0 out of 5 stars ( 14 )

$799.99

Yaesu SPA-1 FTX-1 Series 100W HF/VHF/UHF Amplifiers

Yaesu SPA-1 FTX-1 Series 100W HF/VHF/UHF Amplifiers are designed as an optional accessory for the Yaesu FTX-1 Field Transceiver. By easily connecting the SPA-1 to the rear of your FTX-1 Field Head, you instantly gain a significant power boost, achieving 100W output on the HF bands and 50W output on the 144MHz (2-meter) and 430MHz (70cm) VHF/UHF bands. This increased power dramatically improves your transmission range and signal strength, ensuring more effective communication from your base station. Originally included with the FTX-1 Optima, the SPA-1 is now available separately. It allows FTX-1 Field owners to transform their transceiver into a powerful portable or base station, offering the ultimate flexibility for both field and home operations.

5.0 out of 5 stars ( 2 )

$709.99

Yaesu FT-60R 144/430 MHz Dual-Band HTs

Yaesu FT-60R 144/430 MHz Dual-Band HTs are equipped with extensive receive-frequency coverage, providing versatile two-way amateur communications along with unmatched monitoring. A new-generation Emergency Automatic ID (EAI) feature, for Search-and-Rescue operations, is introduced in the FT-60R! 144/430 MHz FM dual band handheld: * Wide band reception: 108-520 MHz/700-999.990 MHz (cellular blocked) * New emergency automatic ID system * Huge LCD * High power output 5W * Ni-MH long-life battery: FNB-83 (7.2 V, 1,400 mAh) * SAD-24B Charger * SBH-13B Charging Stand * Programmable keys for user convenience * Split CTCSS/DCS and DCS encode-only capability FT-60R's small size allows you to take it anywhere—hiking, skiing, or while walking around town—and its operating flexibility brings the user many avenues of operating enjoyment. Its incredibly tiny FNB-83 Rechargeable Nickel-Metal Hydride Battery Pack provides up to 5 Watts of transmit power on the 144 MHz and 430 MHz Amateur Bands. Besides 144- and 430-MHz transceiver operation, the FT-60R provides receive coverage of the VHF and UHF TV bands, the VHF AM aircraft band, and a wide range of commercial and public safety frequencies! Additional features include: * Over 1000 Memory Channels with Alpha-Numeric Labels * Ten Memory Banks for Channel Allocation * High Power Output: 5 Watts * Long-life FNB-83 (7.2 V/1400 mAh) and 4-Hour Charger included * CTCSS and DCS Encode/Decode, with Split Tone and DCS Encode-only Capability * One-Touch NOAA Weather Access * NOAA Severe Weather Alert with Alert Scan * Nine DTMF Auto-Dialer Memories * Two Front Panel Programmable Keys * Convenient Access Key for Vertex Standard's WIRES™ (Wide-coverage Internet Repeater Enhancement System) * RF Squelch (only passes signals exceeding programmed level) * Mono-band and Memory-only Operating Modes * Rugged Diecast, Water-Resistant Case Construction * Huge LCD Display * Transmit Time-Out Timer (TOT) and Automatic Power-Off (APO) * Automatic Repeater Shift (ARS) * YAESU's exclusive ARTS™ (Auto-Range Transponder System), which "beeps" the user when you move out of communications range New and exciting features of the FT-60R are the Emergency Automatic ID (EAI) function, that will automatically cause your FT-60R to transmit your call-sign and engage your rig's microphone, even if you're disabled and unable to press the PTT switch; Enhanced Paging and Code Squelch (EPCS), that allows you to page a particular station and only receive calls from that station, if desired; and a security password feature to prevent unauthorized use of your transceiver. Please view the Yaesu information for this HT under "Documentation" for the links at the bottom of the part detail page. When you're looking for a versatile handheld transceiver, consider the Yaesu FT-60R from DX Engineering!

4.97 out of 5 stars ( 93 )

$189.99

Yaesu FC-50 External Antenna Tuners

Yaesu FC-50 External Antenna Tuners are specifically designed for use with Yaesu's FT-891 HF/50 MHz transceivers. These microprocessor-controlled antenna tuners are capable of automatically matching up to 200 memories. They may be easily coupled with an FT-891. FC-50 tuners include all necessary FT-891 interconnect cables for operation right out of the box! Match coaxial-fed antennas from 1.8 to 50 MHz with ease and keep your FT-891 humming happily along. Note: For additional information, please look at the files under the "Documentation" tab. Order Yaesu FC-50 External Antenna Tuners from DX Engineering!

4.84 out of 5 stars ( 19 )

$369.99

Yaesu M-90D Desktop Microphones

Yaesu M-90D Desktop Microphones utilize a finely tuned dynamic element to deliver rich low to mid frequency response, desirable for a clear and concise conversational sound that is pleasing to the ear of the listener. The oversize dynamic microphone element and windscreen of the M-90D is designed to accentuate voice input from the front and limit ambient noise and sounds from the side. The attractive desk stand base of the M-90D features a large PTT bar switch, a PTT lock button, and both 8-pin modular and round connectors at the back. By swapping the orientation of the supplied coiled cord cable with 8-pin round and modular connectors at either end, the M-90D may be used with virtually any Yaesu HF transceiver*. For difficult band conditions, a built-in, low-cut filter creates clear and crisp audio characteristics by shaping the low frequency response (cut off at 340Hz, -6dB/octave). An integrated isolation transformer enhances the audio quality of this fine microphone, which also uses three air cylinder tubes, similar to the M-1 Reference Microphone, to provide a lifetime of solid, smooth, and noiseless PTT operation. Yaesu M-90D Desktop Microphone specifications: Microphone type: Dynamic element, preamplified Supply voltage: 5.0 V DC ±10 percent (supplied by most Yaesu transceiver mic connectors*) Frequency response: 30 to 17000 Hz Sensitivity: -60 dB (1 kHz 0 dB=1V/1Pa) Microphone impedance: 600 ohms Dimensions (WHD): 4.17 x 7.56 x 4.98 in. (106 x 192 x 126.5mm) Height maximum when microphone head position is flat Weight: 18.70 oz. (530 g) without cable NOTE: The M-90D Mic head does not disconnect from the desk stand base for other uses. (See M-90MS Mic Head for boom or mic stand applications.) The M-90D is directly compatible with the FTDX101 Series, FTDX10, FT-991A, FT-891, FTDX5000 Series, FTDX3000/D, FTDX1200, FTDX9000 Series, FTDX2000/D, FT-950, FT-450/D, FT-897/D, FT-857/D, FT-818ND, FT-817/ND, FT-900, FT-847, FT-920, FT-1000MP, FT-1000MP MARK-V and FT-1000MP MARK-V Field. *Optional Power Supply Kit ABB19X001 required for M-90D use with Legacy Yaesu FT-1000/D, FT-990, FT-890, FT-840 and FT-747 transceivers.

4.78 out of 5 stars ( 46 )

$199.99

Yaesu Rotator Units

Yaesu Rotator Units are available as replacements or as stand-alone azimuth positioners for use with a third party controller. They include only the top mast bracket and hardware. Lower mast brackets are sold separately.

4.74 out of 5 stars ( 19 )

$329.99

—

$769.99

Yaesu M-70 Desktop Microphones

Yaesu M-70 Desktop Microphones blend classic design with 21st Century features for a stylish, self-contained and affordable cardioid desk mic for your Yaesu transceiver operating pleasure. The M-70 utilizes a directional condenser microphone element which has precisely tuned frequency response to obtain clear and crisp audio quality. Along with its built-in preamplifier, the M-70 uses three Air-Cylinder tubes, similar to the Reference Microphone M-1, to provide a solid and smooth extended operation. The M-70 has a simple one-touch PTT key lock button placed just above the PTT key for those long rag chews. This mic preamp features an isolation transformer integrated into the circuit board to enhance audio quality. Also, a built-in Low-Cut filter allows shaping of the low frequency response with a roll-off at 340Hz, -6dB/octave. An ON/ OFF sliding switch is located on the bottom of the microphone. The M-70 is compatible with all modern Yaesu HF transceivers. Both types of 8-pin mating connectors are on the rear of the M-70 base. By swapping the orientation of coiled cord with opposite connectors at each end, it connects to Yaesu radios equipped with either an 8-pin round or an 8-pin modular mic connector. * Note: A YSU-ABB19X001 Power Supply Kit (sold separately) is REQUIRED When connecting the M-70 Desktop Microphone to the following legacy Yaesu transceivers: * FT-1000/D * FT-990 * FT-890 * FT-840 * FT-747 Order original equipment Yaesu M-70 Desktop Microphones for your Yaesu transceivers from DX Engineering.

4.96 out of 5 stars ( 57 )

$159.99

Yaesu FTX-1 Separation Cables

Yaesu FTX-1 Separation Cables allow you to move the FTX-1 Field control head up to ten feet away from the SPA-1 Amplifier. The SCU-66 series cables allow for extension of the HF, VHF, Power and Amplifier lines from the radio to the SPA-1 Amplifier. Available in two lengths: 5 and 10 feet, there is sure to be an extension cable to meet your needs.

5.0 out of 5 stars ( 3 )

$139.99

—

$149.99

Yaesu FP-1023A Power Supplies

Yaesu FP-1023A Power Supplies are high-quality, regulated DC power supplies specifically designed for use with DC-powered radio equipment. Their fixed 13.8 volt output is 23 rated at amps continuous and 25 amps at the protection point. These supplies use a temperature-controlled cooling fan that is both quiet and reliable. They utilize switching circuitry and are very RF-hash silent. Output ripple at full 23 amp load is only 150mV peak to peak. Power supply weight is only about 3.5 lbs. Additional features: * A current fold-back circuit is utilized to prevent damage to the unit from excessive current drain. * FP-1023A includes extensive filtering to provide high immunity from erratic operation which might be caused by Radio Frequency Interference (RFI). * DC output is on the rear panel via a pair of heavy-duty screw-clamp terminals Note: For additional product information, please look at the files under the "Documentation" tab. Yaesu is renowned for quality Amateur Radio products. Team your transceiver with one of these superior Yaesu FP-1023A Power Supplies from DX Engineering!

4.73 out of 5 stars ( 33 )

$239.99

Yaesu DR-2X 144/430 Dual Band Dual Mode C4FM/FM Analog/Digital Repeaters

Yaesu DR-2X 144/430 Dual Band Dual Mode C4FM/FM Analog/Digital Repeaters are digital / conventional FM dual mode repeaters with Dual Receive / Dual Transmit (DTDR) capabilities. Easy Migration… The repeater controller, receiver and transmitter are all packaged into a standard 19 in. rack mount unit for simple replacement of an existing repeater. Existing peripheral devices such as duplexer and amplifier, etc., can continue to be used as-is. DR-2X Features: * Modulation Modes: Conventional FM, 12.5 kHz C4FM Digital (V/D Mode, VFR Mode, DFR Mode) * VHF or UHF operation (cross-band capable) / DRDT * AMS (Automatic Mode Select) automatically recognizes C4FM digital or conventional FM, and the DR-2X re-transmits using the preset communications mode * 3.5 in. full-color touch panel operation * Extremely reliable, high RF output power: 50W/20W/10W * Emergency Operation: Supports auto-switched backup battery * Front panel microphone connector is provided for repeater testing, and as a base station * Built-in monitor speaker with volume control * Full compatibility with existing repeater controllers using the 15-pin I/O * MSRL (Multi-site repeater link) for easy coverage expansion using optional module * New and improved "News Station" feature for easy sharing of voice and text messaging * Enhanced Group Monitor feature for Easy Grouping Set-up (DG-ID, DP-ID) * NOTE: System Fusion is NOT compatible with D-STAR GMSK User-Friendly Setup: The large front panel, color touch screen permits convenient configuration of the transmitter and receiver frequencies, CTCSS tones, squelch, transmit power output and AMS functions. Simply turn the display switch ON and use the touch panel screen to confirm or change settings. Enhanced Group Monitor: Yaesu's Group Monitor feature allows you to track multiple resources quickly by displaying telemetry and signal strength information of other group members that share the same Digital Group Identification number. Optional MSRL (Multi-site Repeater Link): MSRL allows the repeater operator to link multiple repeaters over a Wide-Area-Network (WAN) or Local-Area-Network (LAN) across short or long distances. New and Improved News Station Function: Quickly store and retrieve digital audio and text messages for groups or individual operators that can be accessed on demand, any time of the day (* Requires Optional MSRL module). Other Features: * Internal AC Power Supply * High Stability plus/minus 2.5ppm TCXO included * DSQ (Digital Squelch Code) Signaling feature * CTCSS and DCS Signaling feature * ID Announcement feature * Remote/External Controller Interface * Base Station Operation * Firmware Upgradeable DR-2X Supplied Accessories: * AC Cable * DC Cable for backup battery * PC Connection cable SCU-20 * Rubber feet (4) DR-2X Options: * DTMF Microphone MH-48A6JA * Hand Microphone MH-42C6J * Voice Guide Unit FVS-2 DR-2X partial specifications: * 144 to 148 MHz, 430 to 450 MHz * Channel steps 5 / 6.25 kHz * Emission type F1D, F2D, F3E, F7W * Frequency stability plus/minus 2.5 ppm (-4F to +140F / -20C to +60C) * Antenna impedance 50 ohms * Supply Voltage AC 100 to 240 V * DC 11.7 to 15.8 V, negative ground * Weight: 22.05 lbs. (10 kg) approximately Transmitter: * RF power output 50/20/5 W * Modulation type F1D, F2D, F3E Variable Reactance Modulation * F7W 4FSK (C4FM) Receiver: * Double conversion Superheterodyne * Audio output 4 W (4 ohms, 10 percent THD, 13.8 V; internal speaker) Current consumption: * 1.5 A (Receive) * 13 A (50 W TX, 144 MHz band) * 14 A (50 W TX, 430 MHz band) Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Move your repeaters into the future! Install Yaesu DR-2X 144/430 Dual Band Dual Mode C4FM/FM Analog/Digital Repeaters from DX Engineering.

5.0 out of 5 stars ( 3 )

$2,099.99

—

$2,584.99

Yaesu Handheld Li-Ion Battery Packs

Fast charging and lightweight, Yaesu Handheld Li-Ion Battery Packs are original equipment versions that look identical, and they fit and run your HT as designed. These Li-Ion packs are longer lasting than cheap substitutes and keep you on the air. Keep an extra pack charged up and on hand for those special event days with long hours of HT operations. You never know when that emergency will occur. When you need your handheld to work at full power, only trust original Yaesu Handheld Li-Ion Battery Packs from DX Engineering.

4.94 out of 5 stars ( 50 )

$49.99

—

$139.99

Yaesu Interface Cables

Yaesu Interface Cables include data, cloning and "CAT" computer interface connections. Developed or selected by Yaesu engineers for specific transceiver models and specific functions, these are original Yaesu cables. Get your Yaesu radio completely connected with Yaesu Interface Cables from DX Engineering! IMPORTANT Note for Yaesu Radio models: FT-450, FT-450D, FT-950, FTDX-10, FTDX-1200 * When using the IC-109 cable to 10-pin mini-DIN, the LINEAR Port must be used on these transceiver models. * DO NOT use the 8-pin TUNER port. * DO NOT set EXT in the Tuner Select menu

4.65 out of 5 stars ( 106 )

$15.99

—

$69.99

Yaesu FC-80 Compact 10W HF/50MHz Automatic Antenna Tuners

Yaesu FC-80 Compact 10W HF/50MHz Automatic Antenna Tuners are lightweight and slim automatic antenna tuner designed for the FTX-1 Field Head. These compact units efficiently tune various antennas for the HF through 50MHz bands at a 10W power output level, maximizing your portable operating capabilities. Its unique design allows it to attach directly to the rear of the FTX-1 Field Head. Additionally, using the supplied spacer, the FC-80 can be combined with either the SBR-52LI Li-ion battery pack or the SCF-1 Cooling Fan, offering a modular and space-saving solution for your field station.The FC-80 automatically matches your antenna impedance to the transceiver, ensuring optimal power transfer, eliminates the need for manual tuning allowing you to quickly get on the air.

4.0 out of 5 stars ( 2 )

$365.99

Yaesu Rotator Mast Bearings

Yaesu Rotator Mast Bearings are used to secure rotating mast that is used for directional antennas. These are also known as thrust bearings, because they maintain smooth and steady rotation even when a large lateral thrust of the wind is pushing on the antenna and the mast. These Yaesu bearings stabilize and secure your antenna mast.

5.0 out of 5 stars ( 16 )

$84.99

—

$159.95

Instant Rebate

Yaesu FT-4XR VHF/UHF Dual Band FM Handheld Transceivers

Yaesu FT-4XR VHF/UHF Dual Band FM Handheld Transceivers are the ultimate budget-friendly choice for compact design and reliability, providing up to 5 watts of stable and reliable output power, hour after hour! These rugged handheld transceivers have 1.4 in. front speakers that deliver 1 watt of powerful, clear and crisp, intelligible audio. The FT-4XR (Dual Band VHF/UHF) and the FT-4VR (Single Band VHF) share the same core feature set and are identical in appearance. FT-4XR HTs include an extraordinarily robust package of features and specifications: * Over 15 hour operating time (5:5:90 duty cycle)* with the supplied 1,750mAh Li-ion battery pack * 3.5 hour rapid charger included * Selectable frequency step from 5 kHz * Two quick programmable keys for quick access to favorite functions * 200 memory channels; three Home Channels and 10 pairs PMS channels * Two different frequencies in one memory channel (one for RX another for TX) user-settable * Versatile scanning capacities including VFO scan, Memory scan, Programmable Memory scan (PMS), Memory Bank Scan and Dual Receive * Lockout for Keypad/PTT Lockout to prevent accidental changes or transmission * VOX Operation with the optional VOX headset * Optional cloning cable and cloning feature allows memory and configuration data from transceiver to transceiver * PC Programmable with optional programming cable * FM Broadcast Receiver * CTCSS/ DCS Operation * Time-out-Time (TOT) * Compact size: 2.1 x 3.5 x 1.2 in. (WHD) For more detailed features and specifications, please click "More Details" to see Documentation and additional images.

4.72 out of 5 stars ( 36 )

$109.95

Yaesu G-2800DXA Extra Heavy-Duty Rotator Systems

Yaesu G-2800DXA Extra Heavy-Duty Rotator Systems are azimuth positioners designed to rotate large tower-mounted amateur and professional antenna arrays under remote control from the station's operating position. These systems feature attractive compass-dial position indication controllers, with a connector port for optional computer interface for automated directional antenna positioning control. Yaesu's G-2800DXA rotator design utilizes 98 heavy 3/8 in. dual-stacked circumferential ball bearings to distribute load over the full diameter of the housing. This design minimizes stress and wear and practically eliminates the possibility of destructive water entry: There is no shaft hole in the top of the housing. Instead of the usual AC motor drive used in older rotator designs, the G-2800DXA, G-1000DXA and G-800DXA use a variable-voltage DC motor, removing the need for a large starting capacitor with its potential for failure exposed to outside temperature variations. The factory-lubricated rotator unit is housed in melamine resin-coated die-cast aluminum, intended to provide maintenance-free operation under all climatic conditions. A mast alignment gauge on the rotator housing simplifies accurate mechanical alignment during installation. Tower mounted, this model handles over 30 sq. ft. of antenna wind load and over 650 lbs. of vertical mast load. About 130 ft. of control cable is included with the G-2800DXA only. Control console power is 110/120 volts AC. The handsome desktop controller provides 360 degrees radial indication of actual antenna azimuth bearing. You can select rotation time over 360 degrees from 50 to 120 seconds on the G-2800DXA, and preset a desired heading for the rotator, to which it then turns automatically. When a fast rotation speed is selected, special "auto slow-start" and "auto slow-stop" features avoid sharp jolts to the antenna array and tower. Activating the rotator causes it to begin turning at slow, but increasing, speed. As the antenna approaches the desired heading, the rotation automatically slows down, before bringing the antenna to a gentle stop. The operator may select the stop heading, the compass bearing through which the rotator cannot be turned, which is most convenient for their station location and operation, allowing full rotation through north, south or both, if desired. In any case, 90 degrees overlapping rotation allows rotation through the selected stop heading for 450 degrees of total rotation. These rotators are intended for mounting to an accessory shelf inside a support tower (not supplied), at least 1-meter (40 in.) below the top of the tower. Yaesu rotators have a fine reputation within the Amateur Radio community. When installing a new tower, or replacing an old rotator, consider purchasing a Yaesu G-2800DXA Extra Heavy-Duty Rotator System from DX Engineering.

5.0 out of 5 stars ( 1 )

$1,769.99

Yaesu M-1 Reference Microphones

Yaesu M-1 Reference Microphones are the ultimate, high-quality, most-innovative desktop microphones and are dedicated to the most discriminating Ham Radio Operators. They feature combined Condenser (Electret) and Dynamic microphone elements. The Condenser Microphone Element produces greater frequency response and a clear, crisp audio characteristic that's perfect for being heard on crowded bands and in big DX pile-ups. The Dynamic Microphone Element delivers the rich low to mid tonalities, much favored for local QSOs and rag chewing. The response of each microphone element may be adjusted independently using the internal, Nine (9) Band, Graphic Equalizer. Each element has a separate gain control for independent adjustment of output levels. The output of each microphone may be selected separately, or they may be combined to produce the most pleasant tonal quality. Both the Condenser Element and Dynamic Element in the M-1 utilize the Nine (9) Band Graphic Equalizer centered at (63Hz, 125Hz, 250Hz, 500Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz and 16 kHz). Each element's frequency response is independently adjustable. Two (2) frequency response memories and a "through" (bypass) mode are provided for each element, and are easily switchable by using one-touch buttons on the microphone base. The supplied TBC (Treble Boost Cowling) enhances the voice response around the important 1 to 1.5 kHz range. Attaching the cowling creates a condensed unique tonal texture that is pleasing for many. The PTT key uses three Air Cylinder Tubes which incorporate a contactless magnetic switch that ensures long-life and stable, noiseless operation. Yaesu's M-1 supports a wide range of Yaesu models including the FTDX-101D and FTDX101MP, FTDX10, FTDX-9000 and FTDX-5000 series, FTDX-3000/D, FTDX-1200, FT-2000/D, FT-991A, FT-891 and the FT-450/D as well as many other Yaesu rigs. NOTE: Do NOT use this microphone on the following: FT-2400H / -7400 series, FT-2500 or FT-8500. Damage may result from modular jack wiring incompatibility. Other included features are: * Reversible cabling for 8-pin round or 8-pin modular use * 3-pin XLR output for FTDX-9000 * Record and playback capability (20 seconds), to confirm the audio tonality * Large red TX LED Indicator * Large Graphic Equalizer / Frequency Response Scope LCD Display with anti-reflective coating * Headphone jack * Touch PTT key lock * Built-in low-cut filter to shape the low frequency response * Cannon-type (XLR) output plug connector * Audio output volume control for headphones Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Supplied Accessories: * TBC (Treble Boost Cowling) * Microphone cable * AC adapter * Operating Manual Your Yaesu transceiver features transmit audio circuitry that is some of the best in the world. Tailor the sound reaching that circuitry with Yaesu M-1 Reference Microphones from DX Engineering!

5.0 out of 5 stars ( 16 )

$899.99

Yaesu Transceivers, Microphones, Tuners, Rotators & More