Availability
Yaesu Parts and Accessories
Yaesu G-450ADC Medium-Duty Rotator Systems
Yaesu G-450ADC Medium-Duty Rotator Systems are the entry-level rotator and controller that are perfect for small HF beams, a tri-bander or VHF and UHF antennas up to about 10 sq. ft. of tower-mounted wind load. A lesser wind load of about 5 sq. ft. can be handled when mounting the G-450ADC on top of a mast with the optional lower mast bracket, GC-038. Rotate Amateur and professional antennas with the Yaesu's handsome 120 Vac desktop remote control console, featuring a compass-style indicator at the station operating position. The G-450ADC rotator system provides 450 degrees of azimuth rotation in just over one minute. The rotator handles masts of 1.25 to 2.48 in. outside diameter and, when tower mounted, a total vertical mast load up to 200 lbs. In the Yaesu G-450ADC, the clamshell rotator design utilizes 98 heavy 7/16-inch dual-stacked circumferential ball bearings to distribute load over the full diameter of the housing. This design minimizes stress and wear, and practically eliminates the possibility of destructive water entry: there is no shaft hole in the top of the housing. Yaesu's factory-lubricated rotator units are housed in Melamine resin-coated die-cast aluminum intended to provide maintenance-free operation under all climatic conditions. IMPORTANT NOTE: Beginning in 2019 the new Yaesu G-450ADC Rotator motors and controllers operate with a 20 V DC control voltage, four-wire system, using the provided connectors to be installed at each end of the user supplied control cable, same as the previous models. For clarity, the new DC rotator motors are marked "G-450DC" at the connector. The rear panel of the controller is titled "G-450ADC" on the serial number label. WARNING: The legacy Yaesu G-450A Rotator motors and controllers used a 26 VAC control voltage, five-wire system. Therefore, old AC controllers are NOT compatible with new DC rotator motors, and new DC controllers are not compatible with old AC rotator motors. All control cable assemblies for all modern Yaesu rotator systems use the same connectors with "1 to 1 pin-out" connector wiring. Therefore, older cable assemblies are compatible with the new Yaesu G-450ADC components, which only use pins 2, 3, 4 and 5 in each connector. For control cable runs less than 125 ft. use four-conductor, 20 gauge control cable (4 x 20 AWG). If the rotator cable needs to be longer than 125 ft., then use four-conductor 18 gauge cable (4 x 18 AWG). The input voltage for the G-450ADC controller is labeled "117 VAC" to indicate house current of 110 to 120 Vac. When you need a medium-duty rotator system, which is durable and attractive, order a new Yaesu G-450ADC Medium-Duty Rotator System from DX Engineering.
( 45 )
$429.99
Yaesu VX-6R 2m/220/70cm FM Heavy-Duty Tri-Band Ultra-Compact FM HTs
Yaesu VX-6R 2m/220/70cm FM Heavy-Duty Tri-Band Ultra-Compact FM HTs are ideal for rigorous field use! With wide-band reception, rugged and submersible design and simple keyboard commands, these Yaesu VX-6R Transceivers are loaded with features. As a bonus, these USA-version radios transmit on 222-225 MHz with 1.5 watts output!
( 60 )
$299.99
Instant Rebate
Yaesu ATAS-120A Auto Active Tuning Antennas
Yaesu's patented ATAS™ Active Tuning Antenna System has been enhanced with the latest model: ATAS-120A. This is a unique mobile antenna that provides HF, VHF and UHF coverage with automatic motorized tuning. Designed for use exclusively with Yaesu transceivers that support ATAS, microprocessor controlled voltages are sent on the coaxial cable to adjust the antenna radiator length for best SWR. Yaesu ATAS-120A active tuning antennas cover the 7, 14, 21, 28, 50, 144 and 430 MHz Amateur bands and are compatible with the Yaesu FTX-1, FT891, FTDX-10, FT-710, FT-991A, FT-991, FT-857D, FT-897D, FT-100, FT-100D and the FT-450D. They are typically attached to a vehicle hatch or trunk lip UHF mount (not supplied), also available from DX Engineering. The ATAS-120A antennas were designed for mobile use, however they can be adapted for base, or portable operation with the appropriate mount and a substantial counterpoise radial wire system. Specifications of the Yaesu ATAS-120A Auto Active Tuning Antennas: * Operational Bands: 40, 20, 15, 10, 6 and 2 meters and 70 cm * Height, appx.: 4.59 to 5.25 ft. * Weight, appx.: 1.98 lbs. * Input Impedance: 50 ohms * Maximum Power: 120 Watts, SSB, CW, 50 percent duty cycle * Matched SWR: Less than 2.0:1 with proper grounding or counterpoise As with any HF, VHF and UHF mobile antenna, performance depends upon the grounding of the mount and bonding to the metal vehicle surfaces to create an optimal ground plane. Portable VHF and UHF operation is made possible with the addition of the optional Yaesu ATBK-100 Antenna Base Kit. This kit is not required, nor should it be used, for mobile operation. Operational convenience and performance is available for your Yaesu HF, VHF and UHF Mobile Transceiver. Order Yaesu ATAS-120A Active Tuning Antennas from DX Engineering.
( 49 )
$349.99
Yaesu FT-3185R VHF FM Mobile Transceivers
Yaesu FT-3185R VHF FM Mobile Transceivers are powerful mobile transceivers designed for the 2-meter amateur band, offering up to 85W of power with additional selectable power settings of 50W, 20W or 5W. They feature a large, aluminum heatsink for passive cooling. Essential features include CTCSS/DCS encode/decode, Automatic Power-Off (APO), Time-Out Timer (TOT), and Automatic Repeater Shift (ARS), making the FT-3185R a reliable choice for mobile 2-meter operation. Additional notable features of the FT-3185R, is Primary Memory Group Activity Monitor (PMG), and Custom Function List (CFL). The Primary Memory Group Activity Monitor (PMG) function can register up to 5 memory channels or VFO receive frequencies simply by pressing and holding the PMG key. Press the key to scan the registered frequencies and when a signal comes in on a channel other than the current channel, the transceiver will automatically receive that signal. The Custom Function List (CFL) can be personalized by registering frequently used functions (up to 9) from the 44 items of the Setup Menu. The functions may then be called up with one touch of the F-Menu key or easily selected with the DIAL knob. The FT-3185R transceiver offers enhanced audio quality with a built-in speaker delivering 3W of clear audio, specifically tuned for improved sound quality, and includes advanced features like the Super-DX function, which improves audio performance in noisy environments. Installation of the optional SPU-1 Audio Digital Signal Processing Unit (ASP) improves the audio quality of weak signals and expands the communication range (sold separately). Additionally, FT-3185R includes 10 NOAA Weather channels with Weather Alert, providing added functionality for users who rely on receiving current weather updates.
( 4 )
$254.95
Instant Rebate
Yaesu FC-50 External Antenna Tuners
Yaesu FC-50 External Antenna Tuners are specifically designed for use with Yaesu's FT-891 HF/50 MHz transceivers. These microprocessor-controlled antenna tuners are capable of automatically matching up to 200 memories. They may be easily coupled with an FT-891. FC-50 tuners include all necessary FT-891 interconnect cables for operation right out of the box! Match coaxial-fed antennas from 1.8 to 50 MHz with ease and keep your FT-891 humming happily along. Note: For additional information, please look at the files under the "Documentation" tab. Order Yaesu FC-50 External Antenna Tuners from DX Engineering!
( 19 )
$319.99
Yaesu SCU-LAN10 Network Remote Control System
Yaesu SCU-LAN10 Network Remote Control System brings the advanced functionality of Ethernet LAN port direct remote control to the unparalleled FTDX-101D and FTDX-101MP Transceivers and the impressive, compact and affordable FTDX10 Transceiver. All of the excitement of these phenomenal radios is available to any PC, on your local network or via the Internet from anywhere in the world, with the SCU-LAN10 interface units connected to the transceiver and a local network or the Internet. SCU-LAN10 Network Remote Control Software is available for download from www.yaesu.com Also available from the same link is the required Firmware Update versions listed here for the FTdx-101 series transceiver to be used with the SCU-LAN10 Interface: - MAIN: V01-14 - DISPLAY: V01-06 - IF DSP: V01-05 - SDR: V02-03 To confirm the firmware version on your FTdx-101 series transceiver, press [FUNC] key, touch [EXTENSION SETTING] and then select [Soft Version]. The software version will be displayed. All FTDX10 versions are supported. Each SCU-10LAN unit includes a special 13-pin DIN interface cable, a USB cable and two snap-on ferrite RFI suppressors. Specifications: Supply Voltage: 13.8 VDC Nominal Operating Voltage: 9 VDC to 15.2 VDC Current Consumption: 800 mA (max) Operating Temp Range: +32F-122F (0C to 50C) Dimensions: (WHD) 4.37 x 1.24 x 5.31 in. (111 x 31.5 x 135 mm) Weight: 0.93 lbs. (420g) NOTE: * A wired LAN port Ethernet router connection is required. Wi-Fi is not supported. * When using the internet, a fixed global IP address or fixed domain name is required for the network where the remote controlled radio is installed. Equip your Yaesu FTDX-101MP, FTDX-101D or FTDX10 transceiver for Internet LAN remote control operations with the Yaesu SCU-LAN10 Network Remote Control interface unit from DX Engineering.
( 5 )
$447.99
Yaesu FTM-150RASP FM Dual Band Mobile Transceivers
Yaesu FTM-150RASP FM Dual Band Mobile Transceivers offer true dual-band simultaneous 2M and 70cm operation, allowing two different receivers to operate on separate bands or within the same band (V+V, U+U, V+U, U+V). Its high-resolution Graphical Dot-matrix display provides a clear and crisp view of the radio's operating status. The front panel is detachable, and with the optional SJMK-500 swing-head, you can adjust the angle for easy mobile operation. These mobile transceivers deliver a power output of 55W on VHF and 50W on UHF, with selectable options of 55W, 50W, 25W, and 5W. The heavy-duty heatsink with Funnel Air Convection Conductor (FACC) ensures stable and reliable TX power. The FTM-150RASP features a front speaker built into the control head, which, combined with the main body speaker, provides a total of 6W of high-quality audio (3W from the front speaker and 3W from the main body speaker). The volume level of the main body speaker is adjustable (0-100%) relative to the front panel speaker to suit user preferences.
( 20 )
$419.95
Yaesu Rotator Units
Yaesu Rotator Units are available as replacements or as stand-alone azimuth positioners for use with a third party controller. They include only the top mast bracket and hardware. Lower mast brackets are sold separately.
( 19 )
$329.99
—
$389.99
Yaesu FTM-150R FM Dual Band Mobile Transceivers
Yaesu FTM-150R FM Dual Band Mobile Transceivers offer true dual-band operation, allowing two different receivers to operate on separate bands or within the same band (V+V/U+UN+U/U+V). Its high-resolution Graphical Dot-matrix LCD display provides a clear and crisp view of the radio's operating status. The front panel is detachable, and with the optional SJMK-500 swing-head, you can adjust the angle for easy mobile operation. The power output for these mobile transceivers is 55W on VHF and 50W on UHF, with selectable options for 55W, 50W, 25W, and 5W. The heavy-duty heatsink with Funnel Air Convection Conductor (FACC) ensures stable and reliable TX power. The FTM-150R features a front speaker built into the control head, which, combined with the main body speaker, provides a total of 6W of high-quality audio (3W from the front speaker and 3W from the main body internal speaker). The volume level of the main body speaker is adjustable (0-100%) relative to the front panel speaker to suit user preferences.
( 13 )
$359.95
Yaesu FP-1030A Power Supplies
Yaesu FP-1030A Power Supplies are high-quality, regulated DC power supplies specifically designed for use with DC-powered radio equipment. Their fixed 13.8 volt output is 25 rated at amps continuous and 27 amps at the protection point. These supplies use a temperature-controlled cooling fan that is both quiet and reliable. These linear-circuit supplies use no switching circuitry and are very RF-hash silent. Output ripple at full 25 amp load is only 3mV peak to peak, indicating high-level regulation. Additional features: * A current fold-back circuit is utilized to prevent damage to the unit from excessive current drain. * FP-1030A includes extensive filtering to provide high immunity from erratic operation which might be caused by Radio Frequency Interference (RFI). * Beside the two pairs (6A) of snap-in DC connections and the (25A) screw-on DC output terminal, FP-1030A supplies feature a cigar-lighter/12V outlet-type DC output jack for radio equipment equipped with a matching cigar-lighter plug. Note: For additional product information, please look at the files under the "Documentation" tab. Yaesu is renowned for quality Amateur Radio products. Team your transceiver with one of these superior Yaesu FP-1030A Power Supplies from DX Engineering!
( 34 )
$369.99
Yaesu FTM-310DR C4FM/FM 144/430MHz Dual Band Digital Mobile Transceivers
Yaesu FTM-310DR C4FM/FM 144/430MHz Dual Band Digital Mobile Transceivers deliver an impressive power output of 55 watts on VHF and 50 watts on UHF, and selectable power levels of 25W and 5W for flexible operation. Audio performance is strong, featuring a total output of 6 watts—split between a 3W front speaker and a 3W main-unit speaker enhanced by AESS (Acoustic Enhanced Speaker System) technology. Audio Signal Processing (ASP) can be added to the FTM-310DR by installing the optional SPU-1 module (sold separately).
( 1 )
$499.95
Instant Rebate
Yaesu FC-80 Compact 10W HF/50MHz Automatic Antenna Tuners
Yaesu FC-80 Compact 10W HF/50MHz Automatic Antenna Tuners are lightweight and slim automatic antenna tuner designed for the FTX-1 Field Head. These compact units efficiently tune various antennas for the HF through 50MHz bands at a 10W power output level, maximizing your portable operating capabilities. Its unique design allows it to attach directly to the rear of the FTX-1 Field Head. Additionally, using the supplied spacer, the FC-80 can be combined with either the SBR-52LI Li-ion battery pack or the SCF-1 Cooling Fan, offering a modular and space-saving solution for your field station.The FC-80 automatically matches your antenna impedance to the transceiver, ensuring optimal power transfer, eliminates the need for manual tuning allowing you to quickly get on the air.
( 2 )
$315.99
Instant Rebate
Yaesu FC-40 Remote Antenna Tuners
Yaesu FC-40 Remote Antenna Tuners are new, wide-range antenna couplers for all versions (original and "D") of the FT-450, FT-857, FT-897 and FTDX-3000/1200 series of transceivers. FC-40 ATUs make use of control circuitry inside the transceiver, allowing the operator to monitor and control operation of the FC-40, which mounts near the antenna feed point. Fully waterproof, the FC-40 may be mounted outdoors in exposed locations, and will handle 100 watts of transmitter power. FC-40 remote tuners are designed for operation on 7 to 54 MHz, when using an 8 ft. whip like the YAESU YA-007, or on 1.8 to 54 MHz when used with a random-length wire longer than 66 ft. Matching time is typically five seconds or less, and the required drive power is 4 to 60 watts. The FC-40 has 200 match-setting-point memories, for instant recall of the tuning settings. Note: For additional information, please look at the files under the "Documentation" tab. When you're looking for great Amateur Radio gear, consider one of these fine Yaesu products from DX Engineering
( 6 )
$329.99
Yaesu FC-30 Automatic Antenna Tuners
Yaesu FC-30 Automatic Antenna Tuners respond to control commands from the FT-897 Transceiver, providing microprocessor-based impedance matching on the 160 through 6 meter Amateur bands. Designed specifically to mount to the FT-897 HF/VHF/UHF transceiver, FC-30 antenna tuners include a cooling fan to ensure thermal stability of the critical matching elements within its compact case. It can work with the FT-857D without mounting. On the HF and 50 MHz bands the impedance matching range is from 16.5 ohm to 150 ohm (up to 3:1 SWR). Accordingly, the FC-30 should not be expected to match "long wire" type antennas unless you have taken specific design steps to ensure that the resistive and reactive impedance presented to the FC-30 is within the specified range. View additional Yaesu information for this product by clicking on the "Documentation" links on the product page.
( 3 )
$289.99
Yaesu ATAS MICRO Manually Tuned Portable Antennas
Yaesu ATAS MICRO Manually Tuned Portable Antennas, model ATAS-25 is designed to for use with portable radios in the field. It can be mounted on a standard camera tripod 1/4 in. stud. It is manually tuned by sliding a shorting ring on the loading coil up or down and by selecting the correct number of top sections. Counterpoise wires are also provided. The ATAS-25 is constructed of high-grade materials for maximum efficiency, so it's the perfect traveling companion for you portable HF radios. Order Yaesu ATAS MICRO Manually Tuned Portable Antennas from DX Engineering.
( 6 )
$289.99
Instant Rebate
Yaesu FC-90 10W HF/50MHz Automatic Antenna Tuners
Yaesu FC-90 10W HF/50MHz Automatic Antenna Tuners are versatile and compact automatic antenna tuners designed to enhance your HF plus 6-meter operations. Whether you're using long wire or standard 50 Ω antennas, the FC-90 ensures efficient tuning and optimal performance.
Not Yet Reviewed
$315.99
Yaesu SM-5000 Station Monitors
Yaesu SM-5000 Station Monitors add just right visual and audible touch to the incredible performance of the FTDX-5000MP Limited transceivers. The High-Resolution Spectrum Scope allows you to see the activity on the Main Receiver, with adjustable bandwidth, attenuation and rate. If that wasn't enough, these Station Monitors add dual speakers with excellent audio capabilities for dual receiver reproduction on each side. Note: For additional information, please look at the files under the "Documentation" tab. Take full advantage of the FTDX-5000MP Limited transceiver's receivers! Hear and see it all with a Yaesu SM-5000 Station Monitor from DX Engineering.
( 4 )
$399.99
Yaesu Desktop Speakers
Yaesu Desktop Speakers provide enhanced intelligibility, reduced listening fatigue and greater enjoyment of your radio investment. Crafted for style to match the radio and constructed for enduring quality, Yaesu Speakers offer excellent sound and useful features for flexibility. Add one to your station and unlock the potential of your transceiver. Order Yaesu Desktop Speakers from DX Engineering.
( 66 )
$259.99
Instant Rebate
Yaesu FT5DR 2m/70cm C4FM/FM Digital Handheld Transceivers
Yaesu FT5DR 2m/70cm C4FM/FM Digital Handheld Transceivers provide reliable 5 watt RF power output in an amazingly lightweight, compact design. Enjoy loud and clear analog FM and digital C4FM voice quality with this full-featured 144/440 MHz HT that can deliver a full watt of audio power. Two independent receivers support true dual-band operation (V+V, U+U, V+U, U+V), plus C4FM digital voice and data with the A and B receivers. Large individual LED indicators for the A band and B band present the status and communication modes (C4FM or Analog) of each band instantly. The FT5DR supports simultaneous C4FM digital (C4FM/C4FM standby) and the convenient TOUCH & GO feature allows fast access for communications on often-used frequencies. The FT5DR high-resolution display highlights the frequency of the operational band with its color display selectable to white, blue, or red. Three touch panel keys and the backlit 7-button key pad below the display provide intuitive operability. The Band Scope function monitors in real time, up to 79 displayed channels centered on the current VFO frequency. The center frequency can be tuned by the dial knob or by touching and moving the frequency of a displayed channel bar. With rubber protection on the corners of the main body, the FT5DR has rugged and shock-resistant construction with an upgraded waterproof rating of IPX7. The comfortable size and form of the full-flat back body provides an excellent grip of the radio. The FT5DR C4FM digital communication features include Automatic Mode Select (AMS), Digital Group ID (DG-ID) operation, Smart Navigation function and the FT5DR supports the WiRES-X Portable Digital Node Function. Advanced features of the FT5DR include: * Wireless hands-free operation using the optional Bluetooth® headset (SSM-BT10) * VOX function * Memory Auto Grouping (MAG) * VFO Band Skip Function * Wide-range RX coverage with continuous reception from 0.5–999.99MHz (A Band) and 108–580MHz (B Band) * Built-in high-sensitivity 66 channel GPS receiver * 1200/9600bps APRS Data modem * 2,200mAh High-Capacity Li-ion Battery Pack (SBR-14LI) is standard * Voice Recording Function * Simultaneous AM/FM broadcast reception while monitoring two frequencies * Micro SD Card Slot * A Quick-Release Holster (SHB-26) is a supplied accessory in the FT5DR package that allows single-touch attaching and detaching the transceiver while wearing the holster on a belt. Click "More Detail" for additional information. Yaesu has moved the bar for excellence once again--order your FT5DR FM/C4FM Dual Band Digital Handheld Transceiver from DX Engineering today!
( 54 )
$384.95
Instant Rebate
Yaesu FTM-310DRASP C4FM/FM 144/430MHz Dual Band Digital Mobile Transceivers
Yaesu FTM-310DRASP C4FM/FM 144/430MHz Dual Band Digital Mobile Transceivers deliver an impressive power output of 55 watts on VHF and 50 watts on UHF, and selectable power levels of 25W and 5W for flexible operation. Audio performance is strong, featuring a total output of 6 watts—split between a 3W front speaker and a 3W main-unit speaker enhanced by AESS (Acoustic Enhanced Speaker System) technology. The SPU-1 Audio Signal Processing (ASP) module comes pre-installed in the FTM-310DRASP, providing optimized audio clarity in noisy environments.
( 5 )
$399.95
Yaesu Replacement Rotator Controllers
Yaesu Replacement Rotator Controllers available here are direct replacement for the G5500, G-450A and G-450ADC models. These are only controller replacements which do not include rotator motors.
( 1 )
$419.99
Yaesu FTDX-101 Series Transceiver Filter Options
Yaesu FTDX-101 Series Transceiver Filter Options include Roofing Filters designed specifically for the Yaesu FTDX-101D and the FTDX-101MP HF+50MHz Transceivers, and the VC Tune preselector for the SUB Receiver of the FTdx-101D. They are available only by special order with installation only by Yaesu. See the chart available at the "Documentation" link, which graphically shows different standard accessories and options, which are described here in the two following paragraphs for the two different transceivers: The Yaesu FTDX-101D has the VC Tune Preselector installed in the MAIN receiver and 12 kHz, 3 kHz and 600 Hz roofing filters installed in the MAIN and SUB receivers. A second VC Tune Preselector, VCT-101, is optional for the SUB receiver and four optional roofing filters, 300 Hz (XF-128CN and XF-129CN) and 1.2 kHz (XF-128SN and XF-129SN) for the MAIN and SUB receivers. All are available only by special order with installation only by Yaesu. The Yaesu FTDX-101MP has both VC Tune preselectors installed in the MAIN and SUB receivers. Roofing filters installed in the MAIN and SUB receivers are the 12 kHz, 3 kHz and 600 Hz, plus a 300 Hz filter is installed in only the MAIN receiver. Three optional roofing filters are available, the 300 Hz YSU-XF-129CN for the SUB receiver, and the 1.2 kHz YSU-XF-128SN for the MAIN and YSU-XF-129N for the SUB receivers, also only available by special order with installation by Yaesu. NOTICE: Option installation and calibration is done by Yaesu only with a $30 per item labor charge when options are special ordered at the same time as the transceiver order. Call DX Engineering to order your custom built FTDX-101D or FTDX-101MP. The standard model FTDX-101D or FTDX-101MP shipped from stock cannot be internally upgraded by the user. For Yaesu to install filters into your previously purchased FTDX-101 series transceiver, filters may be special ordered from DX Engineering with a $30.00 installation fee per item. We send your options order to Yaesu for item to be installed. In this case, you ship your transceiver to Yaesu Service at your cost. They will return your upgraded radio at no additional shipping charge.
Not Yet Reviewed
$289.99
—
$409.99
Yaesu YA-30 Broadband HF Folded Dipole Antennas
Yaesu YA-30 Broadband HF Folded Dipole Antennas are compact folded dipole antennas. YA-30 Folded Dipoles not only cover 1.6 to 30 MHz, they handle RF power input of 150W PEP. Best of all, as with the majority of broadband antennas, no antenna tuner is required. These folded dipoles are multi-wire but relatively light in weight. By having only two stainless steel wires they have little wind loading and an SWR of better than 2:1 on 1.6 to 18 MHz, and 3:1 above 18 MHz. Yaesu YA-30 specifications: * Frequency Range: 1.6-30 MHz * Input Impedance: 50 Ohms * Power Input: 150W PEP (voice) for 3-30MHz * Power Input: 75W (AM, FM, Data, RTTY) TX five minutes maximum 20 percent duty cycle * Input Connector: UHF-type socket * Antenna Length: 83 ft. * 55 ft. inverted "V" configuration (with a 35 ft. tower) Special features: * No Tuner required * UV resistant spacer rods * UV resistant balun * Stainless steel wire * Supplied with 100 ft. of coaxial cable You've heard of the renowned Yaesu quality. If you would like a broadband antenna for 160 through 10 that will last the test of time, then look at one of these Yaesu YA-30 Broadband HF Folded Dipole Antennas from DX Engineering!
( 2 )
$349.99