Availability
7 Results Found For "noise"
ACOM 1500 HF + 6 Meter Linear Amplifiers
ACOM 1500 HF + 6 Meter Linear Amplifiers are user-friendly and look after themselves. They are designed to safely withstand up to 300 watts of reflected power and up to 100 milliseconds duration of drive spikes. These amplifiers also continue to function with "soft" AC mains and will deliver more than half power at only 85 percent of nominal mains voltage. They can withstand voltage drops for up to 10 milliseconds and can tolerate 15 percent mains voltage spikes. This level of tolerance is especially important on Field Day, during DXpeditions, and at portable operating events where emergency power is relied upon. Please see the SPECIAL Note, below. The True Resistance Indicator (TRI) is a powerful tuning aid that helps the operator to quickly and precisely match the antenna impedance to the optimum tube load impedance. The auto-operate function (when enabled) maintains the amplifier in the OPERATE mode, thus avoiding unnecessary manual operations. Your ACOM amplifier will enable you to change antennas virtually instantaneously and allow you to use your antennas over wider frequency ranges. Broadband input matching presents a very good load to the transceiver over the entire spectrum of 1.8-54 MHz. These amplifiers produce virtually-silent QSK. The input bypassing and vacuum antenna relays are virtually silent even in the CW QSK mode; thanks to specially designed mounting hardware. ACOM 1500 amplifiers utilize a single 4CX1000A ceramic and metal radial-beam tetrode vacuum tube with plate dissipation of 1,000 watts. Tube protection includes permanent monitoring and automatic protection of plate and grid voltages and currents, as well as the exhaust air temperature. These pieces of data are essential to indicate 4CX1000A operating conditions. All ACOM 1500 amplifier status indications are explained via detailed text displayed on the dot matrix, high brightness, vacuum fluorescent display (VFD). LED indicators are provided for Power, Operate mode, Attenuation-on, Transmit, Selected antenna output, and ON/OFF conditions. * Frequency Coverage: 1.8-54 MHz * Power Output: 1,500W PEP, 1,200W continuous carrier; for continuous carrier transmissions longer than 15 minutes the external auxiliary fan must be installed * Intermodulation Distortion: Better than 35dB below PEP rated output * Hum and noise: Better than 40dB below rated output * Harmonic Output Suppression: 1.8-21.5 MHz; 50dB below rated output, 24-54 MHz; 66dB below rated output * Input and Output Impedance: Nominal values: 50 Ohm unbalanced output; Input circuit: broadband, VSWR less than 1.3:1, 1.8-54 MHz (no tuning, no switching); Bypass path: VSWR less than 1.1:1, 1.8-54 MHz continuously * RF Gain: 13dB typically, frequency response less than 1dB (60-85 W drive power for rated output) * Primary Power: 100-264V (100, 110,120, 200, 210, 220, 230 and 240V nominal taps), 50-60Hz, single phase, 3500VA consumption at rated output * SPECIAL Note: Order part number AOM-1500 to wire the AC plug yourself; order part number AOM-1000-240 for pre-wired 240 volt operation * Complies with CE safety and electromagnetic compatibility requirements as well as FCC-regulations * Size: 16.6 x 14 x 7.7 in. * Weight 58.4 lbs. * Operating environments: Temperature range 0 to 50 degrees C, Humidity up to 95 percent at 35 C * Altitude: up to 3,000m (10,000ft) above sea level without output deterioration Note: For additional information, please look at the files under the "Documentation" tab. Why not allow yourself to enjoy the finest amplifier? Order one of your own ACOM 1500 HF + 6 Meter Legal Limit Linear Amplifiers from DX Engineering and give your signal a nice boost! Note: During and after your amplifier's warranty period, DX Engineering can direct you to the appropriate location for repairs for ACOM amplifiers. That facility will charge a repair fee for services outside the warranty period.
( 14 )
$5,122.99
ACOM 2000A Automatic HF Linear Amplifiers
ACOM 2000A Automatic HF Linear Amplifiers are the world's most advanced amplifiers designed specifically for hams. These amplifiers were the first to include fully-automatic tuning and sophisticated digital-control capabilities. ACOM's revolutionary 2000A amplifiers deliver maximum legal power in all modes and operate on all amateur HF bands 160 to 10 meters. Be sure to read the SPECIAL Note, below. These amplifiers follow your transceiver's band and frequency automatically in far less than a second. No special cables are required: Just a "dit" on CW or "AHH" on SSB is enough for instant band and band segment changes. ACOM 2000A amps break every amateur band into multiple frequency segments. The user can store up to ten (10) sets of tuning adjustments for every frequency segment - allowing individual settings for multiple antennas on each band. By completely eliminating time-consuming tune-up procedures, ACOM 2000A linear amplifiers give contesters a real edge. At the core of the ACOM 2000A is a classic HF amplifier design that employs two matched 4CX800A high-performance ceramic-metal tetrodes for maximum efficiency. ACOM uses these rigorously tested tubes with today's most advanced digital control technology to create an amplifier with outstanding performance, features and reliability. Measured third and fifth order IMD are typically 40dB and 45dB down, respectively. Typical harmonic emissions are as low as -55dBc (second) and below -70dBc (for third and above). Thus, probability of QRM, BCI or TVI is dramatically minimized. ACOM's 2000A remote diagnostic features and modular design ease fault isolation and repair. The protection system makes damaging one of these amplifiers difficult. Information on the 12 most recent protection trips is stored in an INFO BOX for remote diagnostics via phone line, PC, and Internet. Full break-in (QSK) is based on a built-in vacuum relay. Transmit/receive switching sequence is secured by a dedicated microprocessor. * Frequency Coverage: All Amateur Bands 1.8-29.7 MHz * Power Output: 1,500W PEP, 1,500W continuous carrier (the external auxiliary fan must be installed for operations of continuous carrier transmissions longer than 15 minutes * Hum and noise: Better than 35dB below rated output * Harmonics Output Suppression: Better than 50dB below rated output * Input and Output Impedance: Nominal values: 50 Ohm unbalanced output; Input circuit: broadband, VSWR less than 1.3:1, 1.8-29.7 MHz Amateur Bands (no tuning, no switching); Relay Bypass Throughput: VSWR less than 1.1:1, 1.8-29.7 MHz Amateur Bands * Automatic Tuning: Load Impedance Matching - less than 3 seconds; Band Change - less than one second; Segment Change - less than 0.2 seconds * RF Gain: 14.5dB, frequency response less than 0.5dB (50 to 60W drive power for rated output) * ALC: grid-current derived, -11V max, rear panel adjustable * Primary Power: 180-264V (200, 220 and 240V nominal taps, 10 percent tolerance), 50-60Hz, single phase, 3,500VA consumption at rated output * SPECIAL Note: Order part number AOM-2000A to wire the AC plug yourself; order part number AOM-2000A-240 for pre-wired 240 volt operation * Complies CE safety and electromagnetic compatibility requirements, as well as FCC regulations * Size: W 17.3 x 19.7 x H 7.1 in. Weight: 36 kg * Operating environments: temperature range: 0 to 50 degrees C; Humidity: up to 95 percent at 35 degrees Celsius * Altitude: up to 3,000m above sea level without output degradation Note: For additional information, please look at the files under the "Documentation" tab. Get the most advanced legal-limit HF amplifier for your shack. Order ACOM 2000A Automatic HF Linear Amplifiers from DX Engineering… today! Note: During and after your amplifier's warranty period, DX Engineering can direct you to the appropriate location for repairs for ACOM amplifiers. That facility will charge a repair fee for services outside the warranty period.
( 9 )
$6,374.99
—
$8,935.98
ACOM 1000 HF + 6 Meter Linear Amplifiers
ACOM 1000 HF + 6 Meter Linear Amplifiers are the world's best value in an Amateur HF amplifier. These amps provide you a comfortable 1,000 watts output on all amateur bands from 160 through 6 meters. The plate-load True Resistance Indicator (TRI) is a powerful tuning aid which helps the operator to quickly and precisely match antennas. The auto-operate function (when enabled) maintains the amplifier in OPERATE mode for you, saving on manual operations. Broadband input matches to the transceiver over the entire range of 1.8-54 MHz. ACOM 1000 amplifiers are both user-friendly and look after themselves. They are designed to safely withstand up to 300 watts reflected power, drive spikes of up to 100 milliseconds duration, drive RF "tails" after a PTT or KEY release and the operator's inadvertent tuning errors. They also withstand a "soft" AC line and will deliver more than half power at only 75 percent of nominal mains voltage. They can withstand voltage drops for up to 10 milliseconds, and up to 15 percent higher line-voltage spikes. These details are all important, particularly when used at Field Day, on DXpeditions and other portable operations. Be sure to read the SPECIAL Note, below. An ACOM 4CX800A high-performance ceramic/metal tetrode with plate dissipation of 800 watts is employed. On-board processing provides permanent monitoring and protection of plate and grid voltages and currents, as well as the exhaust temperature. Text messages, 12 different parameters, and strip peak-reading PEP meter are displayed on a dot-matrix, back-lighted LCD. LED indicators are provided for OPERATE, attenuator-on, and ON/OFF conditions. Records of the amplifier internal status are stored in nonvolatile memory for the seven most-recent auto-protection trips. This information is very valuable should diagnostics be needed. The input bypassing and the vacuum antenna relays are very quiet even in CW mode due to their special mounting. This results in virtually noise-free QSK! ACOM-1000 details: * Frequency Coverage: 1.8-54 MHz * Power Output: 1,000W PEP or continuous carrier; for continuous carrier transmissions longer than 15 minutes the external auxiliary fan must be installed * Intermodulation Distortion: Better than 35dB below rated output * Hum and noise: Better than 40dB below rated output * Harmonic Output Suppression: 1.8-29.7 MHz; 50dB below rated output, 50-54 MHz; 66dB below rated output * Input and Output Impedances: Nominal values: 50 Ohm unbalanced output; Input circuit: broadband, VSWR less than 1.3:1, 1.8-54 MHz; Bypass path: VSWR less than 1.1:1, 1.8-54 MHz continuously * RF Gain: 12.5dB typically, frequency response less than 1dB (50-60W drive power for rated output) * Primary Power: 170-264V (200, 210, 220, 230 and 240V nominal taps), 50-60Hz, single phase, 2200VA consumption at rated output. 230 or 240 volts recommended for USA * SPECIAL Note: Order part number AOM-1000 to wire the AC plug and voltage selection yourself; order part number AOM-1000-240 for pre-wired 240 volt operation or part number AOM-1000-120 for pre-wired 120 volt operation * Complies with CE safety and electromagnetic compatibility requirements as well as FCC-regulations * Size: 16.6 x 14 x 7.2 in. * Weight 58.5 lbs. * Operating environments: Temperature range 32 to 122 degrees F, Humidity up to 95 percent at 95 F * Altitude: up to 3,000m (10,000 ft.) above sea level without output deterioration Note: For additional information, please look at the files under the "Documentation" tab. ACOM says that these are the "world's best value" in an Amateur HF amplifier. Order one of these ACOM 1000 HF + 6M Linear Amplifiers from DX Engineering and decide for yourself! Note: During and after your amplifier's warranty period, DX Engineering will provide service and repair for ACOM amplifiers. A repair fee will be charged for services outside the warranty period.
( 47 )
$4,364.99
ACOM 2100 HF + 6 Meter Linear Amplifiers
The ACOM 2100 is a complete and self-contained linear amplifier that covers all Amateur bands from 1.8 through 54 MHz and provides over 1500W PEP or continuous carrier output power, typically at only 40 to 55 watts drive. The 2100 utilizes a single 4CX1000A ceramic and metal radial-beam tetrode vacuum tube with plate dissipation of 1,000 watts. This manually tuned amp features many automatic functions. Tube protection includes permanent monitoring and automatic protection of plate and grid voltages and currents, as well as the exhaust air temperature, essential data that indicates the power tube operating conditions. The 2100 amplifier features virtually silent high-speed break-in CW (QSK). The input bypassing and vacuum antenna relays are virtually silent even in the CW QSK mode; thanks to specially designed mounting hardware. The 2100 is designed to safely withstand up to 400 watts of reflected power and up to 100 milliseconds duration of drive spikes. Additionally, these amplifiers continue to function with "soft" AC mains and will deliver more than half power at only 85 percent of nominal mains voltage. They can withstand voltage drops for up to 10 milliseconds and can tolerate 15 percent mains voltage spikes; especially important on Field Day, during DXpeditions, and at portable operating events where emergency power is relied upon. Be sure to read the SPECIAL Note, below. The True Resistance Indicator (TRI) is a powerful tuning aid that helps the operator to quickly and precisely match the antenna impedance to the optimum tube load impedance. The auto-operate function (when enabled) maintains the amplifier in the OPERATE mode, thus avoiding unnecessary manual operations. Broadband input matching presents a very good load to the transceiver over the entire spectrum of 1.8-54 MHz. Your 2100 will enable you to change between three antennas virtually instantaneously and allow you to use your antennas over wider frequency ranges. All ACOM 2100 amplifier status indications are explained via detailed text displayed on the high brightness OLED display. LED indicators are also provided for Power, Operate Mode, Attenuation-on, Transmit and Selected Antenna output. ACOM 2100 Features and specifications: * Frequency Coverage: 1.8-54 MHz * Power Output: 1,500W PEP, 1,500W continuous carrier; for continuous carrier transmissions longer than 15 minutes the external auxiliary fan must be installed * Intermodulation Distortion: Better than 32dB below PEP rated output * Hum and noise: Better than 40dB below rated output * Harmonic Output Suppression: 1.8-29.7 MHz; 50dB below rated output, 50-54 MHz; 66dB below rated output * Input and Output Impedance: Nominal values: 50 Ohm unbalanced output; Input circuit: broadband, VSWR less than 1.3:1, 1.8-54 MHz (no tuning, no switching); Bypass path: VSWR less than 1.1:1, 1.8-54 MHz continuously * RF Gain: 13.5dB typically, frequency response less than 1dB (40-55 W drive power for 1,500 watts output) * Primary Power: 100-264V (100, 110,120, 200, 210, 220, 230 and 240V nominal taps), 50-60Hz, single phase, 3500VA consumption at rated output * Complies with CE safety and electromagnetic compatibility requirements as well as FCC-regulations * Size: 17.5 x 14.7 x 8.0 in. * Weight 64.6 lbs. * Operating environments: Temperature range 0 to 50 degrees C, Humidity up to 95 percent at 35 C * Altitude: up to 3,000m (10,000ft) above sea level without output deterioration Why not allow yourself to enjoy the finest amplifier? Order your own ACOM 2100 HF + 6 Meter Linear Amplifier from DX Engineering and give your signal a nice boost! Note: During and after your amplifier's warranty period, DX Engineering can direct you to the appropriate location for repairs for ACOM amplifiers. That facility will charge a repair fee for services outside the warranty period.
( 31 )
$5,687.98
ACOM 1010 HF Linear Amplifiers
ACOM 1010 HF Linear Amplifiers cover all bands from 1.8 through 29.7 MHz. They provide over 700 W PEP output (or 500 W continuous-modes) with less than 60 watts of drive and operate without special transceiver signaling; they need only "ground on TX" and the required drive. ACOM's exclusive True Resistance Indicator (TRI); enables faster antenna changes and use over wider frequency ranges. Also, a built-in antenna selector switch with two outputs is included to provide instant choice of antennas. Antenna matching can be achieved in less than 10 seconds and at a quarter of nominal output power, which results in lower risk of interference to other stations and greater safety to the amplifier components. A single ACOM 4CX800A high-performance ceramic-metal tetrode with plate dissipation of 800 watts is used for maximum efficiency. These amplifiers are self-monitoring. They are designed to safely withstand up to 240 watts of reflected power, up to 100 milliseconds of drive spikes (RF "tails" after a PTT or KEY release), and even operator tuning errors. They are also capable of operating at more than half their designed output at only 75 percent of nominal line voltage. Because they can tolerate deep voltage drops and 15 percent line voltage spikes, they are particularly well-suited for use in portable environments, such as Field Day and DXpeditions. Importantly, a variety of system parameters are continuously monitored and available to the operator to assure safe and efficient amplifier operation. Design of the high-voltage power supply eliminates the danger of turn-on transients affecting sensitive devices connected to the same line (mains) circuit. Moreover, the amplifier can be configured to accommodate any of eight nominal line voltages between 100 and 240 V, 50 or 60 Hz. Please see the SPECIAL Note, below. ACOM 1010 specifications: * Frequency Coverage: All amateur bands in the 1.8-29.7MHz frequency range * Power Output: 700 W PEP or 500 W continuous modes. * Intermodulation Distortion: Better than 35 dB below rated output. * Hum and noise: Better than 40 dB below rated output. * Harmonic Output Suppression: Better than 50 dB below rated output. * Input and Output Impedance: Output: 50 Ohm unbalanced, SO-239 connectors; Input circuit: broadband, VSWR less than 1.3:1, 1.8-30 MHz continuously (no tuning, no switching); Bypass path: VSWR less than 1.1:1, 1.8-30 MHz continuously, 200 W maximum * RF Gain: 11dB, frequency response less than 1dB (50 to 70 W drive for rated output) * AC Power: 85-132 V/170-264 V ac (100, 110, 120, 200, 210, 220, 230 & 240 V nominal taps, plus 10 percent to minus 15 percent tolerance), 50-60 Hz, single phase, 1,200 VA * SPECIAL Note: Order part number AOM-1010 to wire your AC plug after removing European plug yourself; order part number AOM-1010-240 for pre-wired 240 volt operation (NEMA 6-15P) or part number AOM-1010-120 for pre-wired 120 volt operation (NEMA 5-15P). * Operating environments: Temperature range; 32 to 122 degrees F, Humidity; up to 95 percent at 95 degrees F, Altitude; up to 10,000 above sea level without output deterioration. * Complies with FCC-regulations as well as CE safety and electromagnetic compatibility requirements * Dimensions, (in.) 15.83 W x 12.4 D x 6.5 H * Weight: 39.7 lbs. Note: For additional information, please look at the files under the "Documentation" tab. Get one of these highly-advanced HF amplifiers for your shack. Order an ACOM 1010 HF Linear Amplifier from DX Engineering… today! Note: During and after your amplifier's warranty period, DX Engineering can direct you to the appropriate location for repairs for ACOM amplifiers. That facility will charge a repair fee for services outside the warranty period.
( 53 )
$3,376.99
ACOM 1003 HF + 6 meter Linear Amplifiers
ACOM 1003 HF + 6 meter Linear Amplifiers are self-contained, full-featured units that cover all amateur bands from 1.8 MHz to 54 MHz. With less than 80 watts input, they deliver 1000 watts PEP output or 900 W continuous carrier using a single ceramic/metal power triode 3CX800A7. ACOM 1003 models have two new front panel relay switches, one to select from three antenna outputs and another to quickly engage and disengage an input attenuator for rapid tuning without transceiver adjustment. A multitude of advanced features in this compact and affordable amplifier validates its admirable design. ACOM 1003 Amplifiers are available from DX Engineering in three versions: •AOM-1003-240 Tested with a pre-installed NEMA 6-15P for 240 VAC at 8.5A (10A fuses) •AOM-1003-120 Tested with a pre-installed NEMA 5-15P for 120 VAC at 15A+ (20A fuses) •AOM-1003 Install your own plug, reset voltage taps internally, 10A fuses supplied The ACOM1003 HF+6M Linear Amplifier is amazingly easy to operate! •True Resistance Indicator (TRI) bar scale meter: Simplifies accurate adjustment of plate-load impedance controls. •Two-line OLED Display: Provides a peak power bar graph meter, 18 unique operational parameters and text status messages. •External Tuner Not Needed: For antenna SWR up to 3:1, even at 1000 W output. •Front-panel Input Attenuator: Instantly reduces input power when tuning, eliminating the need for transceiver power adjustments. •Silent HF Reed Relay: Enables Fast T/R switching for QSK CW. Additional features and protection: •Operator selectable class AB2 mode for best linearity in SSB mode or class B for reduced plate dissipation in continuous digital modes. •Operator selectable Full 100% or 50% power output with no efficiency deterioration. •Auto controlled air flow tube cooling. •Continuous monitoring of amplifier parameters and tube protection. •Able to monitor 18 operator-selectable amplifier parameters on the display. •Unique ACOM protection for the bands switch. •Factory tuned input lowpass filters for best linearity and input SWR less than 1.3 in each amateur radio band. -OLED comment display – Two-line OLED display with peak-reading forward-output power bar graph and 18 operator-selectable amplifier parameters on the display. -Three antenna outputs – Three antenna outputs are selectable by a push-button on the front panel. -Less noise in the shack – HF antenna reed relay for a virtually silent, QSK compatible CW operation. -Transceiver-independent – The amplifier operates without special signals from the transceiver - "Ground on TX" (PTT) and 50-80 W RF drive power are sufficient. -Single tube operation – Uses a single ceramic/metal power triode 3CX800A7 in cathode driven, grounded grid configuration. -Tube protection – Continuous monitoring of amplifier parameters and tube protection. -Output RF arc protection – Original ACOM HF arc protection at the output, or at the antenna. -Power supply – Single phase mains power, 90-132 / 180-264 VAC at 50-60 Hz, power consumption at rated output – up to 2000 VA @ 240 VAC. Internal taps for 8 nominal AC mains voltages: 100, 110, 120, 200, 210, 220, 230 & 240VAC, ±10% tolerance), 50-60 Hz, single phase. -Easy maintenance – Non-volatile memory with SIGNATURE records eight of the most recent Serious (Hard Fault) Protection events. -Documentation – The User's Manual is available as a PDF file only. The latest version is available under the Download tab (see above). ACOM creates and distributes its documentation in ENGLISH language only.
( 2 )
$4,899.99
ACOM 2000P Commercial HF Linear Amplifiers
ACOM 2000P Commercial HF Linear Amplifiers (FCC Part 90) are the world's most advanced amplifiers designed specifically for the commercial communications market. Many of these amplifiers also see military service at stations across the globe. These amplifiers were the first to include fully-automatic tuning and sophisticated digital-control capabilities. ACOM's revolutionary 2000P amplifiers deliver high-power RF in all modes and operate on all frequencies between 3.0 and 30 MHz with continuous coverage. ACOM commercial/military amplifiers follow your transceiver's frequency changes automatically in far less than a single second. No special cables are required: Just a dot on CW or "Ah" on SSB is enough. Tuning is equally fast in digital modes. By completely eliminating time-consuming tune-up procedures, ACOM 2000P linear amplifiers give operators more time for exchanging important communiqués. At the core of the ACOM 2000P is a classic HF amplifier design employing two Svetlana 4CX800A (GU74B) high-performance ceramic and metal tetrodes. ACOM coupled these tried-and-true tubes with today's most advanced digital control technology to create an amplifier with outstanding performance, features and reliability. Measured third and fifth order IMD are typically 40dB and 45dB down, respectively. Typical harmonic emissions are as low as -55dBc (second) and below -70dBc (for third and above). Thus, the probability of harmonic channel interference, BCI or TVI is dramatically minimized. ACOM's 2000P remote diagnostic features and modular design ease fault isolation and repair. The protection system makes damaging one of these amplifiers very difficult. Information on the 12 most recent protection events is stored in an INFO BOX for remote diagnostics via phone line, PC, or Internet. Full break-in (QSK) is based on a built-in vacuum relay. Transmit/receive switching sequence is secured by a dedicated microprocessor. This is important for agencies, civilian or otherwise, who use modes that require lightning fast switching ACOM 2000P details: * Frequency Coverage: All frequencies 3.0-30.0 MHz * Power Output: 1,500W PEP, 1,200W continuous carrier; for continuous carrier transmissions longer than 15 minutes the external auxiliary fan must be installed * Hum and noise: Better than 35dB below rated output * Harmonics Output Suppression: Better than 50dB below rated output * Input and Output Impedance: Nominal values: 50 Ohm unbalanced output; Input circuit: broadband, VSWR less than 1.3:1, 3-30 MHz (no tuning, no switching); Bypass path: VSWR less than 1.1:1, 3-30 MHz continuously; output circuit matching capability: better than VSWR 3:1, automated * Automatic Tuning: Load Impedance Matching - less than 3 seconds; Band Change - less than one second; Frequency Segment Change - less than 0.2 seconds * RF Gain: 14.5dB, frequency response less than 0.5dB (50 to 60W drive power for rated output) * ALC: grid-current derived, -11V max, rear panel adjustable * Primary Power: 180-264V (200, 220 and 240V nominal taps, 10 percent tolerance), 50-60Hz, single phase, 3,500VA consumption at rated output * Complies with CE safety and electromagnetic compatibility requirements, as well as applicable FCC regulations * Size: W 17.3 x 19.7 x H 7.1 in. Weight: 36 kg * Operating environments: temperature range: 0 to 50 degrees C; Humidity: up to 95 percent at 35 degrees Celsius * Altitude: up to 3,000m (9,840 ft.) above sea level without output degradation Note: During and after your amplifier's warranty period, DX Engineering can direct you to the appropriate location for repairs for ACOM amplifiers. That facility will charge a repair fee for services outside the warranty period. Get the most advanced commercial/military amplifier for your HF operation. Order ACOM 2000P Commercial HF Linear Amplifiers from DX Engineering.
( 1 )
$8,864.99