Availability
Antennas
LDG Electronics RU-9:1 Unun
LDG Electronics RU-9:1 Unun was designed to allow easy interface of random length vertical and end fed antennas to the LDG line of Automatic Antenna Tuners. This 200 watt Unun also operates as a standalone, meaning that it does not necessarily require a tuner for use on a certain antenna. It may be used with many of your antenna projects where a 4:1 Unun is typically recommended. This model is small and easy to weatherproof for use in the elements. LDG RU-9:1 Unun specs: * Ratio: 9:1 * Frequency coverage: 1.8 to 30 MHz. * Power range: Up to 200 watts PEP * Enclosure dimensions (WHD): 2.5 x 5 x 1.25 in. * Weight: 6 oz.
( 99 )
$39.99
LDG Electronics RU-1:1 Unun
LDG Electronics RU-1:1 Unun is intended to help remove unwanted RF from the coax cable shield. It is normally used as a common-mode RF choke for short coax cable runs or non-resonant antennas. The RU-1:1 features SO-239s for input and output. RU-1:1 Unun Specs: * Ratio: 1:1 * Frequency coverage: 1.8 to 30 MHz. * Power range: Up to 200 watts PEP * Enclosure dimensions (WHD): 2.5 x 5 x 1.25 in. * Weight: 6 oz.
( 58 )
$39.99
LDG Electronics RU-4:1 200 Watt UNUNs
These LDG RU-4:1 200 Watt UNUNs were designed to allow for an easy interface of 43 ft., non-resonant vertical antennas to antenna tuners via 50-ohm coaxial cable. These 200 watt peak-power UNUNs also allow for the easy matching of resonant verticals--in many cases, without the use of an antenna tuner! They may also be used with many of your antenna projects where a 4:1 match is needed. When you are looking for an inexpensive solution to your antenna matching needs, these LDG RU-4:1 200 Watt UNUNs from DX Engineering are real matchmakers!
( 27 )
$39.99
LDG Electronics 1:1 Current Baluns
LDG Electronics 1:1 Current Baluns were designed to allow for the easy interface of ladder line antennas and long wires with the LDG line of automatic antenna tuners. * Configuration: 1:1 Current Balun * Frequency Coverage: 1.8 to 30 MHz. * Power Range: 100W continuous or 200 watts PEP * Easy to weatherproof * Enclosure size: 5 x 2.5 x 1.25 in. * Weight: 6 oz. (including enclosure) These baluns operate "stand alone"; thus, they do not require an LDG tuner. They may be used with any of your longwire, random wire, or ladder line antenna projects. For low power operation it's hard to beat the value in LDG Electronics 1:1 Current Baluns from DX Engineering!
( 28 )
$39.99
Diamond Antenna Dual-Band HT Antennas
Diamond Antenna Dual-Band HT Antennas offer a wide range of features to choose from for your handheld transceiver or scanner. Whether you need a replacement antenna or want to improve your HT's radiating efficiency and range, these dual-band antennas offer a quality solution for your needs. They come available with BNC, SMA, or SMA-female connector schemes and in antenna sizes to suit your needs. Diamond rates their antenna gain figures against 'standard' HT antennas usually delivered with a new transceiver. This antenna gain method makes it easy to see how their antennas perform as a replacement for an original manufacturer's antenna. Many of these antennas also have excellent extended-receive coverage! Diamond Antenna Dual-Band HT Antennas are a quality and cost-effective solution. Get one for your HT or scanner today!
( 188 )
$21.99
—
$34.99
DX Engineering Mobile Whip Antennas
DX Engineering Mobile Whip Antennas are the classic 102 in. whip made from the finest heat treated 17-7 PH tapered stainless steel, which resists bending and kinking. 17-7 PH is a precipitation-hardening stainless steel that provides high strength and hardness, excellent fatigue properties, good corrosion resistance, and minimum distortion upon heat treatment. These stainless steel whip antennas are tough. Dissipation tips reduce unwanted static buildup and they fit all 3/8-24 in. threaded mounts. The WP-102 is the standard 102 in. whip, shipped in a 104 in. tube. They resist bending and kinking and are ideal for mobile and portable operations and for Active Receive Antenna Systems. They are also great for use with mobile antenna tuners. No matter what your HF whip antenna application may be, get your stainless steel Mobile Whip Antennas from DX Engineering!
( 19 )
$49.99
LDG Electronics 4:1 Voltage Baluns
LDG Electronics 4:1 voltage baluns were designed to allow for the easy interface of ladder line antennas and long wires with the LDG line of automatic antenna tuners. * Configuration: 4:1 Voltage Balun * Frequency Coverage: 1.8 to 30 MHz * Power Range: 100 W continuous or 200 watts PEP * Easy to weatherproof * Enclosure size: 5 x 2.5 x 1.25 in. * Weight: 6 oz. (enclosure weight included) These baluns operate "stand alone"; thus, they do not require an LDG tuner. They may be used with any of your long, random, or ladder line or other antenna projects.
( 17 )
$39.99
DX Engineering Direct Coax Feed Add-On Kits
DX Engineering Direct Coax Feed Add-On Kits are designed for the Hustler BTV Series of antennas. They allow for a direct connection with a coaxial cable PL-259 (UHF male) connector. Manufactured from heavy-duty stainless steel, these add-on kits allow for a convenient connection from your coaxial cable feed line directly to the base of the Hustler BTV series vertical antennas by adding a mounted SO-239 (UHF female). They may be positioned in any one of three different directions to accommodate a straight-in or sideways connection from your feed line. If you are looking for a professional and reliable installation, then order a low power or high power (low loss) coaxial jumper cable for connecting your radial plate with a bulkhead connector. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering Direct Coax Feed Add-On Kits include a laser-cut stainless steel bracket, high quality SO-239 with PTFE insulation, and stainless steel hardware. Order one for your BTV vertical!
( 79 )
$42.99
Diamond Antenna Hole Mount Cable Assemblies
Diamond Antenna hole mount cable assemblies can be used as stand-alone antenna mounts or cable extensions. Several feature the use of a 6 1/2 ft. section of 1/8 in. diameter RG-316 PTFE coax and mini-UHF connectors, these mounts are perfect for fitting in tight areas or through vehicle body panels. Some use 13.5 feet of RG-316 only, so that SMA connectors may be used. These mounts are ideal for trunk mount or remote head installations. Order from DX Engineering!
( 34 )
$41.99
—
$47.99
Daiwa CS-201A Coax Switches
Use Daiwa CS-201A coax switches to switch between one antenna and two radios or two antennas and one radio. These 2-position coaxial switches can handle the power and offer auto grounding of the unused terminal for protection and excellent port isolation. Specs on the Daiwa CS-201A coax switches are: * Frequency range: (up to) 600 MHz * Power rating: 2.5 kW PEP, 1 kW CW * VSWR: below 1.12:1 across range * Insertion loss: less than 0.2 dB * Isolation: 60 dB, 600 MHz * Connector: SO 239
( 61 )
$45.95
Larsen Mobile Antenna Mounts
Larsen Mobile Antenna Mounts are premium-quality antenna mounts. Larsen also has high performance trunk lip mounts. These mounts are a better solution than drilling holes in your car, especially when your car is leased! Manufactured of quality materials, their trunk lip mounts will last car after car. To assemble your own mount, Larsen offers their TMB Series mounting brackets. These are stainless steel brackets without cable or antenna base. They are perfect for assembling a custom installation. When you need a great antenna mount, trust Larsen Mobile Antenna Mounts from DX Engineering!
( 39 )
$20.59
—
$48.99
Comet Antennas No-Hole Fender Brackets
Comet No-Hole Fender Brackets are vehicle-specific truck and SUV mobile antenna brackets that mount without drilling. Unlike lip-mounts that use set screws and penetrate the paint; these brackets use bolts that already exist on your fender. Due to the particular vehicle-specific angles necessary to form these brackets, almost all are designed for the driver's side only. (There are only a few new right fender mounts!) By using an existing fender bolt, the bracket extends between the hood and fender gap. The mounted antenna sits vertically, along the side of the hood. A 3/4 in. hole in the bracket accepts the standard NMO connector and cable assembly. You may also use these brackets to attach an antenna that has a UHF mount. Simply choose a Comet UHF mount cable assembly; they include a large washer and jam nuts to keep the 5/8 in. diameter UHF connector from falling through the 3/4 in. hole in the bracket. NOTE: * Coaxial cable and base mount assemblies are not included with these brackets. * Not suitable for larger antennas which require the use of a heavy duty bracket. These clever mounting brackets provide a stable antenna platform without drilling holes in your vehicle. Order your Comet No-Hole Fender Brackets from DX Engineering and enjoy mobile operating again!
( 57 )
$26.95
—
$26.99
Diamond Antenna Tri-Band HT Antennas
Diamond Antenna Tri-Band HT Antennas offer a wide range of features to choose from for your handheld transceiver or scanner. Whether you need a replacement antenna or want to improve your HT's radiating efficiency and range, these tri-band antennas offer a quality solution for your needs. Diamond rates their antenna gain figures against 'standard' HT antennas usually delivered with a new transceiver. This antenna gain method makes it easy to see how their antennas perform as a replacement for an original manufacturer's antenna. Many of these antennas also have excellent extended-receive coverage that's great for scanner use! Diamond Antenna Tri-Band HT Antennas are a quality and cost-effective solution. Get one for your HT or scanner today!
( 32 )
$26.99
—
$46.99
DX Engineering Wire Antenna Balun Mounting Brackets
DX Engineering Wire Antenna Balun Mounting Bracket Kits are custom designed specifically for mounting high-performance Maxi-Core® 20 Baluns or legacy Comtek baluns. These kits include the virtually unbreakable combination balun mounting frame and wire antenna center insulator bracket, two DX Engineering End Insulators plus all stainless steel hardware. This unique design provides minimum capacitive coupling between the antenna wire and the field surrounding the balun core. Wire Antenna Balun Mounting Bracket Kits are the ideal starting point for building a top-performing and long-lasting coaxial cable fed single-band or multi-band wire antennas. Use a DX Engineering Maxi-Core® 20 Balun or Comtek balun, or other manufacturer's similar NEMA box balun, for a resonant or off-center fed dipole, inverted-V or loop. Use the optional coaxial cable strain relief (DXE-CSR213-1 for RG-213 or RG-8U sized coax or the DXE-CSR8X-1 for RG-8X sized coax) with your optional dipole wire (DXE-ANTW Antenna Wire) and antenna rope, all from DX Engineering. These patented** balun wire antenna insulator brackets and end insulators are made from a super high-strength UV resistant black poly-resin compound. They provide an exclusive serpentine wire-weave grip for insulated antenna wire. This method of threading the wire provides a grip strong enough to permanently support the antenna wires without the need for soldered wrapped wire ends onto the antenna wires. This allows fast and easy field adjustments of antenna length for tuning without soldering. Get everything you need to build the best performing, longest lasting wire antenna possible, all from DX Engineering! DX Engineering Wire Antenna Balun Mounting Bracket Kits DXE-WA-BMB: 1 ea. Balun & Wire Antenna bracket High-strength UV black poly-resin (** US Patent # D744,459) 2 ea. DX Engineering End Insulators High-strength, UV poly-resin (**US Patent # D534,905) 4 ea. 6-32 x 3/4" long Stainless Steel Hex Head Bolts 8 ea. #6 Stainless Steel Flat Washers 4 ea. 6-32 Nyloc Hex Nuts Click "More Detail" to see the "Documentation" tab for additional product information and the "Suggested Parts" tab for the additional items (not supplied) for your resonant wire antenna project with the DX Engineering Wire Antenna Balun Mounting Bracket Kit.
( 22 )
$29.99
DX Engineering Radial Wire Metal Anchor Pins
DX Engineering radial wire metal anchor pins are perfect for fastening radials below the grass line to eliminate the risk of damaging your radials during lawn maintenance. They are manufactured from 11-gauge steel and are 6 in. long to help keep the cables buried properly.
( 39 )
$22.99
Alpha Delta Antenna Hardware Kits
Alpha Delta Antenna Hardware Kits contain one DELTA-C Center Insulator, antenna connection hardware, one model SEP arc-plug static electricity protector that is installed on the back of the DELTA-C, and two model DELTA-CIN End Insulators. These kits are a great way to build wire antennas! The antenna hardware is constructed using Alpha Delta's exclusive Model Delta-C Center Insulators and model CIN End Insulators. They're molded from Deltalloy, an extremely tough and durable plastic specifically blended to withstand sunlight and extreme weather conditions. An SO-239 connector is provided for a direct connection to the PL-259 on your coaxial cable. Or, a ladder-line balanced feedline may be connected directly to the dipole wire ends. If a balanced feedline is used with an antenna tuner in non-resonant applications, the SEP arc-plug must be removed to prevent the "false triggering" of the gas tube. The ALP-SEP arc-plug static electricity protector is a special gas tube component designed to bleed off slow-rising static electricity buildup generated by thunderstorms, high-wind driven snow, sand, or even a harmless looking cloudy day. These static charges have been measured to several thousand volts and can damage or destroy sensitive components in receivers' or transceivers' front-end circuitry. Note: When the "Documentation" tab is available, please look at the associated files for additional product information. For wire antenna kits with a little something extra, order Alpha Delta Antenna Hardware Kits from DX Engineering!
( 44 )
$42.99
DX Engineering Rope Hardware Kits
DX Engineering Rope Hardware Kits are exactly what you need for all kinds of antenna projects that use support rope. Designed especially for use in conjunction with Mastrant Antenna Support Rope, these rope hardware kits provide just the right size pulleys, shackles, rope clips, duplex clips, carabiners, thimbles and quick links to facilitate fast and easy rigging, raising and lowering of wire antennas and guying of vertical antennas and antenna supports. They're great for experimenters, SWLs and Radio Amateurs who need to frequently adjust or "tinker" with their antennas. When used with new wire antenna installations, these products and Mastrant Antenna Support Rope allow for easy trimming or retuning of mono and multiband dipoles, end-feds, slopers and all types of wire antennas. Just lower, trim, and raise your antenna again until it's just right. For vertical antennas and support masts, use these kits for an installation that can be adjusted and disconnected easily, without having to constantly re-tie knots and deal with tangled excess rope. These kits feature stainless steel and metal-alloy parts for excellent durability and weather resistance. They will last a very long time. Are you raising a wire or vertical antenna or mast, or are using support rope on another project where strength and convenience are equally important? Consider using Rope Hardware Kits from DX Engineering for a professional looking project that really is stronger and is SO much easier to work on!
( 33 )
$20.14
—
$42.89
Comet Antennas HF/6M RFI Chokes
Comet Antennas HF/6M RFI Chokes are designed to be easy to install and will help prevent or reduce RFI carried into the shack by the coax. The TRF-Mini features a PL-259 connector on one end and an SO-239 on the other, this cable assembly includes a ferrite core at the center. At just 7 inches long, there is sure to be room behind your radio for this choke that can handle up to 350 watts and covers from 1.8-54 MHz.
( 2 )
$29.95
Comet 3D4M Standard Mobile Lip Mount Cable Assemblies
Comet 3D4M Standard Mobile Coax Cable Assemblies can be used with a lip mount or used alone as a permanent hole mount. Comet 3D4M mobile mounts come with 13 ft. of low-loss coax with gold-plated UHF connectors. An O-ring is included to help keep moisture from migrating under the threaded nut holding the connector in place. Their PL-259 connectors have a removable barrel, so the coax can be routed easily through small holes or tight places without removing the entire connector. They can also be disassembled and reassembled to shorten the length of the coax. Order Comet 3D4M standard mobile coax cable assemblies from DX Engineering. They offer a simple, easy way to mount your antenna!
( 26 )
$35.95
Moonraker HF Mini Stick Monoband Mobile Whip Antennas
Moonraker HF Mini Stick Monoband Mobile Whip Antennas are an easy, economical way to enjoy operating on the HF Amateur Radio bands while mobile or portable. These low profile HF Mini Mobile Whip Antennas are designed to mirror the construction of their larger counterparts and can be mounted with just a small magnet mount. They feature robust, helical-wound heavy gauge copper wire, wound onto a lightweight fiberglass mast. Additionally, they are collapsible simply by separating the 2 sections. The included top-mount stainless steel whip is field tunable for the lowest SWR using stainless steel set screws to securely lock the whip in place. SWR will vary according to mount location and grounding (3/8-24 mount not included). SWR at resonance is typically 1.5:1 or less when properly matched. Increased bandwidth is possible when an ATU is used. * Mounting: 3/8-24 Brass Stud (antenna mount not included) * Power Handling: 250 Watts PEP SSB, 100W CW, 50W FT8
Not Yet Reviewed
$49.99
DX Engineering EZ-BUILD® UWA Center-T and End Insulator Kits
DX Engineering EZ-BUILD® UWA Center-T and End Insulator Kits are designed for building wire antennas for high-power operations. This model will mount to any DX Engineering Balun for a balanced and isolated wire antenna, or this insulator kit may be used directly with DX Engineering 300 Ohm Ladder Line for a non-resonant multi-band dipole. All EZ-BUILD® kits include our lightweight, high strength, UV-protected center-T and end insulators. They feature an exclusive serpentine wire grip for insulated DX Engineering antenna wire and our high strength, high power 300 ohm ladder (window) line. Threading the wire or window line through the center and end insulator openings in a serpentine manner creates a grip that is so strong, the wire ends do not need to be looped, wrapped, or soldered. EZ-BUILD® kits allow for fast and easy field adjustments! The DX Engineering EZ-BUILD® Center-T includes a centered top 3/8 in. hole for the attachment of an antenna support rope, and the End Insulators accept up to 5/16 in. antenna support rope. Our EZ-BUILD® kits simplify the construction of your wire antenna, with wire crimp terminals and stainless steel hardware. For a wire antenna, built with a DX Engineering Balun at the feed-point, the coax feedline may be secured with the optional DX Engineering Coax Strain Relief which features an aluminum bracket, neoprene-cushioned P-clamps, and stainless steel hardware. This method supports the feedline without subjecting the balun connector to the strain of the coaxial cable's weight or movement. DX Engineering EZ-BUILD® UWA Center-T and End Insulator Kits let you create any type of wire antennas, including single-band, multi-band, multi-frequency, folded dipole, doublet and inverted-V, off-center fed, Windom, Zepp, long wires, rhombic, V-beam, or loop antennas. EZ-BUILD® UWA Center-T may be used as a strain relief for our 300-ohm ladder line at the ground end or house end of the run, or as the strain relief on the feed end of a vertical wire or long wire antenna. Since soldering is not necessary when building an antenna with this kit, it is perfect for Field Day use, portable operations, or even for the weekend experimenter. However, it is certainly the best choice for your permanent wire antenna system. This UWA-KIT is for building a wire antenna with any DX Engineering Balun or 300 Ohm Ladder Line. Use the EZ-BUILD® UWA213-KIT for the construction of an RG-213 or RG-8U coax fed wire antenna without a balun, that will be operated at high power and high duty cycle modes of operation, such as AM, RTTY, or FM. The UWA8X-KIT will handle low and medium power levels and tolerate low SWR levels. DX Engineering EZ-BUILD® UWA Center-T and End Insulator Kits include: -- One center-T insulator featuring an exclusive no-loop, no-solder wire, multiple wire, or 300 ohm ladder line serpentine grip design, which allow for the rapid field adjustment of wire lengths; the center-T includes a centered top hole for attaching support ropes -- Two end insulators featuring the no-loop, no-solder, serpentine grip design -- Two stainless steel wire connection bolts, nuts, and washers. -- Six crimp ring terminals for antenna and ladder line wire connections -- Additional stainless steel hardware for mounting DX Engineering baluns DX Engineering baluns, antenna wire, 300 ohm ladder line, and support rope are sold separately. Only your imagination is the limit to the practical applications for which this useful insulator system may be used. It is made from a very strong UV resistant poly-resin plastic that can handle the weight of huge wire antennas, and a DX Engineering balun as well as the attached coaxial cables. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. So, keeping an inexpensive EZ-BUILD® DXE-UWA-KIT on hand for your next wire antenna project is a great idea!
( 25 )
$30.49
Moonraker Turbo-38 Magnetic Antenna Mounts
Moonraker Turbo-38 Magnetic Antenna Mounts will keep your mobile antenna secured to your vehicle due to its large, 7 in. magnetic base and features rubber pads to protect your vehicle's finish and includes 13 ft. of RG-58 coaxial cable terminated with a PL-259 connector and a 3/8-24 threaded base.
( 11 )
$43.99
KiwiSDR V2 SDR Protection Circuit
The KiwiSDR V2 SDR Protection Circuit is designed to safeguard KiwiSDR receivers—and virtually any other SDR—from the most common and costly sources of front end damage. Many KiwiSDR owners have experienced failures caused by nearby lightning storms, transmitting into an antenna positioned too close to the KiwiSDR antenna, or accidentally transmitting directly into the receiver. The original V1 protection circuit provided solid protection against static discharge and nearby lightning, but it did not always survive accidental high power RF transmission. The V2 design directly addresses this. The upgraded V2 unit adds a replaceable 100 mA fast blow fuse, providing an additional sacrificial layer of defense for your receiver. A spare fuse is included in a small plastic bag—keep it safe, as 100 mA 1808 fast blow fuses are not easy to source. The protection circuit is housed under a secure 3D printed cover held in place with a 1.4 mm screw for easy access.
Not Yet Reviewed
$35.99
Comet Mobile Antenna Springs
Comet CA-SPR Mobile Antenna Springs are a must if you are a first responder using one of their Comet CA-2x4SR or CA-2x4SRNMO search and rescue antennas. They are also great for non-emergency off-road use or in areas where a flexible antenna would be a better choice. These spring kits replace the lower antenna rod with a shortened rod and a flexible, durable spring to protect your mobile antenna from the many hazards that would otherwise cause antenna damage. You never know what terrain you'll be traveling next. Get one of these Comet CA-SPR Mobile Antenna Springs, now available from DX Engineering, and give your search and rescue antenna a little more protection!
( 10 )
$29.95