Availability
ICOM Transceivers and Receivers
On Sale
Icom IC-7300MK2 HF/50MHz Base Transceivers
Icom IC-7300MK2 HF/50MHz Base Transceivers are an advanced evolution of the original IC-7300, designed for superior performance and equipped with modern connectivity. Connectivity upgrades include a first for Icom HF transceivers: the MK2 integrates an HDMI™ output for external display of spectrum scope, waterfall, and audio. Additionally, USB Type-C™ interfaces with dual virtual COM ports and audio I/O enable simultaneous use of digital modes and logging software, while LAN ports provide simplified RS-BA1 remote control without the need for a base station PC. The IC-7300MK2 features an improved Reciprocal Mixing Dynamic Range (RMDR) of approximately 105dB at 2kHz separation and transmit phase noise reduced to –139dBc/Hz at 1kHz offset, delivering cleaner signals and enhanced adjacent-signal handling. Power efficiency is optimized with standby current reduced from 0.9A to 0.7A, minimizing heat generation for stable long-duration operation. Additional enhancements include built-in CW decoding, RX antenna IN/OUT connectors for external filters or preamps. These refinements make the IC-7300MK2 a high-performance, feature-rich solution for serious HF operators seeking cutting-edge SDR technology with robust remote and display capabilities
( 30 )
$1,499.95
$1,398.95
On Sale
ICOM IC-9700 VHF/UHF/1.2 GHz Transceiver
ICOM IC-9700 VHF/UHF/1.2 GHz All-Mode Direct Sampling Transceiver features advanced technology. Built with the VHF/UHF weak signal operator in mind, the IC-9700 has an RF direct sampling receiver for the 2m and 70cm bands, and a single down conversion IF from 311 – 371MHz for the 23cm band. This combination design provides a quiet receiver using Icom's DSP technology. This is an excellent all-mode transceiver with which to cover all operating facets of the 2 meter, 70 cm and 23 cm bands! Features for the ultra-advanced Icom IC-9700 include: * Direct-Sampling SDR design * RF Output of 100 Watts on 2m (144-148 MHz), 75 Watts on 70cm (430-450 MHz) and 10 Watts on 23 cm (1240-1300 MHz) * All modes including FM, SSB, AM, CW, RTTY, Digital, D-Star Digital Voice and Digital Data * Digital Data (DD) mode provides 128 kbps data communication * D-STAR Terminal and Access Point mode (RS-MS3A/W) * Dual D-STAR receive (decodes two voice streams simultaneously) * Main and Sub RX * Full Duplex operation/ Dual Watch (no V/V or U/U Capability) * Smooth satellite operations with normal/reverse tracking and 99 satellite channels * Supports 2 wave simultaneous reception (different bands/same or different mode) * High definition Real-Time 4.3 inch TFT display * Touchscreen interface (LCD touch-screen control) * Main or Sub-Band Scope (Center/Fix mode +/-500kHz Center Mode) * Audio Scope * CW full break-in * 0.5ppm frequency stability * Voice Recording/playback function (SD Memory Card) * Ethernet Port - Internal Server for Internet remote control with optional RS-BA1 software * USB audio and control connection * DR Memories: 2,500 * Antenna connectors: 2m SO-239, 70cm Type N, 1.2 GHz Type N More information at the More Details link below. Explore new horizons and space communications with the ICOM IC-9700 VHF/UHF/1.2 GHz Transceiver.
( 125 )
$2,099.95
$1,998.95
On Sale
ICOM IC-7760 HF/50MHz All Mode Base Transceivers
ICOM IC-7760 HF/50MHz All Mode Base Transceivers feature an ALL NEW innovative shack style consisting of a remote control head and separate RF deck, connected with a commercially available control (LAN) cable. This concept increases the flexibility of your station installation, making more space available on the desktop by placing the RF deck in an area closer to the antenna feed point. In addition to the direct connect feature, control head to RF deck, allows you to utilize your home network to make any tabletop your shack, and a PC is not required!
( 8 )
$6,999.95
$5,998.95
On Sale
Icom IC-7610-32 HF Plus 50 MHz All Mode Transceivers
Icom IC-7610-32 HF Plus 50 MHz All Mode Transceivers feature internal component updates to ensure the highest performance from these true dual-receive transceivers. RF Direct Sampling takes you to the next level with advanced dynamic range performance and true dual receivers in the Icom IC-7610-32 transceiver. Whether it is poor band conditions or battling to pick out a call in a large pile-up, faint signals have always been a challenge for DXers and Contesters around the world. The difference between putting the QSO in the log or having to try another time is the combination of your skill as an operator and the capability of your receiver. One key factor, measured as RMDR, Reciprocal Mixing Dynamic Range, is the receiver's ability to pick out a faint signal in the presence of stronger, adjacent signals. The IC-7610-32 introduces dual RF direct sampling receivers that achieve 110dB RMDR, rivaling the performance of top-of-the-line transceivers. This model transmits on the Amateur bands 160 through 6 meters with 100 watts output on all modes, except 25 watts on AM, with full dual receiver coverage from 30kHz to 60MHz.
( 3 )
$3,898.95
—
$3,999.95
$3,704.00
—
$3,898.95
ICOM IC-2730A VHF/UHF FM Transceivers
ICOM IC-2730A VHF/UHF FM Transceivers provide VHF/VHF, UHF/UHF simultaneous receive capability in addition to VHF/UHF receive. These transceivers have a built-in duplexer, so you can use a 144 and 430 MHz dual-band antenna without needing an external duplexer. Main dials, volume, squelch knobs and primary control buttons are symmetrically laid out for each band. IC-2730A transceivers employ a durable PA module and deliver 50 watts of high power analog operation on the 2-meter and 70cm bands. CTCSS and DTCS tones are built-in for quiet stand-by and repeater access. CTCSS split tone function allows you to set CTCSS tones separately for repeater uplink and downlink. A single DTCS code may be polarity reversed independently for repeater uplink or downlink. IC-2730A receivers cover 118-174 and 375-550MHz. You will be able to listen to aviation, marine, weather channels and other utility communications. The display size of ICOM's IC-2730A is 1.5 times larger than ICOM's other comparable models. Frequency display and channel names are larger, and the white backlight provides higher contrast. Here are more ICOM IC-2730A features: * Cross band repeater capability * CS-2730 Free PC programming software downloads * Versatile scanning capability * Squelch delay and squelch attenuator * Sub band auto mute function * Auto repeater function * Auto power off * TX time-out-timer * 16 DTMF auto dial memories * Weather channel receive with weather alert (USA version only) * CI-V remote control capability (through the optional OPC-478UC) Note: For additional information, please look at the files under the "Documentation" tab. Supplied accessories include: * HM-207 remote control microphone * Controller cable, OPC-837 * Microphone hanger * DC power cable, OPC-1132 * Spare fuse NOTE: Optional MBA-4 bracket mounts the Control Head to the main unit. These new dual-band FM transceivers have advanced features at a very affordable price. Purchase ICOM IC-2730A VHF/UHF FM Transceivers from DX Engineering for the best in quality and customer service!
( 144 )
$339.95
ICOM IC-2730B Black Edition VHF/UHF FM Transceivers
ICOM IC-2730B Black Edition VHF/UHF FM Transceivers boast all the same great features as the original IC-2730A transceiver, but with a new high contrast black inverted LCD display that offers improved visibility in various lighting conditions, reduced glare, and lower energy consumption. The display size of ICOM's IC-2730B is 1.5 times larger than ICOM's other comparable models, giving way for larger frequency display and channel names. These VHF/UHF FM Transceivers provide VHF/VHF, UHF/UHF simultaneous receive capability in addition to VHF/UHF receive. These transceivers have a built-in duplexer, so you can use a 144 and 430MHz dual-band antenna without needing an external duplexer. Main dials, volume, squelch knobs and primary control buttons are symmetrically laid out for each band. IC-2730B transceivers employ a durable PA module and deliver 50W of high power analog operation on the 2-meter and 70cm bands. CTCSS and DTCS tones are built-in for quiet stand-by and repeater access. CTCSS split tone function allows you to set CTCSS tones separately for repeater uplink and downlink. A single DTCS code may be polarity reversed independently for repeater uplink or downlink. IC-2730B receivers cover 118-174 and 375-550MHz. You will be able to listen to aviation, marine, weather channels and other utility communications. These IC-2730B transceivers come equipped with an HM-207 Remote Control Hand Mic. An optional VS-3 Bluetooth Headset is available and requires a UT-133/A Bluetooth module to be installed into the IC-2730B. The Bluetooth headset and module are sold separately.
( 19 )
$369.95
On Sale
ICOM ID-52A PLUS VHF/UHF Multi-Function D-Star Handheld Transceivers
ICOM ID-52A PLUS VHF/UHF Multi-Function D-Star Handheld Transceivers build upon its popular predecessor (ID-52A) and brings with it updated features that will delight amateur enthusiasts both at home and in the field. This upgraded handheld transceiver now features Enhanced Bluetooth® connectivity, which will allow you to connect to an Android device in Terminal and Access Point Modes, Dual operation of Terminal Mode and simplex/repeater operations and finally, an Updated USB-C charging/data port for faster connections and charging. This feature packed transceiver will allow you to enjoy portable operations like you've never seen before. The large 2.3 in. 230 X 280 pixel color display offers more information, an improved interface, with an industry-first color waterfall band scope for a VHF/UHF portable. The integrated speaker provides a booming 750mW of output so you never miss a contact. Additionally, the integrated Bluetooth allows for connectivity with a wide variety of external audio devices. New Features: - Enhanced Bluetooth® – Connect your Android™ in Terminal and Access Point Modes - Dual operation of Terminal Mode and simplex/repeater operations - Updated USB-C charging/data port for faster connections and charging
( 6 )
$749.95
$698.95
ICOM ID-5100A-D VHF/UHF Digital Transceivers
ICOM ID-5100 A-Deluxe VHF/UHF Digital Transceivers feature an intuitive touch screen interface that provides quick and smooth operation for settings and editing various functions and memories. Their large, 5.5 in. 320 × 128 pixel touch display features an easy-to-see software keypad (QWERTY keyboard) that allows you to input alphanumeric characters quickly. Expanded receiver coverage includes 118-174 MHz and 375-550 MHz with dual receiver capability that allows you to receive two bands simultaneously (including within a single band). Almost all VHF and UHF communications are available to you! ID-5100A-Ds also have simultaneous receive for FM/FM and FM/DV modes, and the capability of monitoring two DV signals. The main band audio has priority if two DV signals come in at the same time. These transceivers feature integrated GPS which allows you to transmit and receive position data from the built-in GPS receiver. Position, course, speed and altitude are shown on the display. The GPS position information can be used for exchanging position reports, tracing the GPS log and searching for nearby repeater sites. Their GPS antenna is located in the remote head, no external GPS antenna required. The DV/FM repeater list function assists you in accessing near-by repeaters, even when you are visiting an area for the first time. This function searches for near-by repeaters using the repeater memories with the GPS position information. To use the repeater list function, the position data of the repeater is required in the repeater list. ID-5100A-Ds are shipped with a limited number of repeater memories preprogrammed. Dplus Reflector link commands are added to the DR function to allow easy reflector operation. Use Reflector, link/unlink to Reflector, echo-test and repeater information commands are selectable. Built-in CTCSS and DTCS tones are used for accessing closed repeaters or tone squelch operation. The pocket beep alerts you with a beep sound when the transceiver receives a preset tone. 1750 Hz tone is also available. The UT-133 optional Bluetooth® board is necessary for operation with the optional VS-3 headset and the optional RS-MS1A, Android™ application. (Free download from Google Play™) The Android™ application also provides second-station control through an Android device. Other features: * Menu-driven touch-screen user interface * DTMF via microphone or ID-5100 display * Enhanced D-PRS functions with object, position, item and weather formats * Convenient memory contents management using CSV data format * Speech function announces operating frequency, mode and received call sign (DV mode) * Independent main dial, volume and SQL knobs for A/B bands * AM air band dualwatch * CS-5100 programming/cloning software supplied * 50W output power on both VHF and UHF bands * Weather channel with weather alert function * Auto repeater function Note: For additional information, please look at the files under the "Documentation" tab. Supplied accessories: * MBA-2 Remote Head Mounting Bracket (Main Body Mounting Bracket, MBF-4, is optional) * Hand microphone, HM-207 * Controller cable, OPC-837 (3.5 m; 11.4 ft.) * Microphone hanger * Spare fuse The most advanced VHF/UHF mobile transceiver with digital D-STAR capabilities is now available! Order your one of your own ICOM ID-5100A-D VHF/UHF Digital Transceivers from DX Engineering and enjoy VHF/UHF communications more than ever!
( 83 )
$549.95
On Sale
ICOM IC-V3500 2M VHF FM Mobile Transceivers
Experience the state-of-the-art refinements of the new ICOM IC-V3500 VHF FM Transceiver boasting enhanced features and a rugged, easy-to-use design. The white, backlit LCD features a spacious layout that enhances readability and reduces eyestrain. This 2M analog FM mobile transceiver can transmit from 144-148 MHz at a full 65 W of stable output power and receive from 136-174 MHz. Enjoy new features like instant mute and crisp speaker output with the new Audio Volume Boost feature and new emergency safety functions that are required for some commercial use applications
( 10 )
$239.95
$234.95
ICOM IC-V3500B Black Edition 2M VHF FM Mobile Transceivers
ICOM IC-V3500B Black Edition 2M VHF FM Mobile Transceivers combine a durable mechanical design with clear, intuitive operation and updated display technology. The latest Black Edition introduces a high visibility black inverted LCD, providing enhanced contrast and readability in a wide range of lighting conditions. The dark background improves clarity for frequency, channel, and function indicators, making the transceiver easier to monitor at a glance whether driving in bright daylight or operating at night. These transceivers deliver a full 65W of selectable RF output power for the 144–148MHz transmit range, backed by a large heatsink that stabilizes thermal performance during extended operation. They also offer wideband receive capability from 136–174MHz, providing wideband VHF receive coverage for expanded monitoring capability Audio performance remains a core strength, with the internal speaker producing 4.5W of loud, articulate sound thanks to improved frequency response and an optimized acoustic opening. Instant volume boost and one touch mute options provide quick level control when conditions change. The IC-V3500B transceivers also include emergency call and alert functions, which transmit alternating alarm tones and live microphone audio while sounding a local alarm from the speaker. For memory and scanning flexibility, the IC V3500B series provides 207 memory channels with alphanumeric naming, dynamic bank link scanning, CTCSS/DTCS encoding and decoding, and priority watch capability. Weather channel reception and weather alerts are available, further enhancing situational awareness. Construction remains robust, meeting MIL STD 810G environmental standards. Configuration is streamlined through free PC programming software, and many functions can be controlled directly from a compatible remote control microphone, simplifying installation and day to day use in mobile environments.
( 2 )
$239.95
Icom IC-7110 HF/VHF/UHF All Mode Transceiver Reservation
Introducing the new Icom IC-7110, a versatile all-band, all-mode transceiver engineered for Amateur Radio operators who demand premium performance across every operating environment. Covering HF, 50 MHz, 144 MHz, and 430/440 MHz bands with support for SSB, CW, RTTY, AM, FM, and D-STAR digital voice operation, the IC-7110 delivers powerful 100-watt output on HF and 50 MHz and 50 watts on VHF/UHF. Its advanced dual-receiver architecture enables true HF/VHF or HF/UHF dual-watch capability, allowing operators to monitor multiple bands simultaneously while maintaining independent operating modes for each receiver. At the heart of the IC-7110 is a large 4.3-inch color touchscreen display featuring a real-time spectrum scope and waterfall display. Instantly identify open frequencies, monitor band activity, and visually track signal movement across the band with exceptional clarity. Whether chasing DX, contesting, or monitoring local repeaters, the intuitive display keeps critical operating information within easy reach. Digital mode enthusiasts will appreciate the IC-7110's simplified FT8 setup, which automatically configures the radio for FT8 operation with a single preset selection. Additional customizable presets provide flexibility for future digital modes, streamlining station setup and reducing configuration time. CW operators benefit from the integrated CW decoder technology derived from Icom's acclaimed IC-7300 series, offering adjustable decoding parameters to optimize performance under varying band conditions. The IC-7110 also delivers comprehensive D-STAR functionality, including DR mode, Terminal Mode, Access Point Mode, DV repeater monitoring, and even picture transmission and reception directly from the radio. Built-in Wi-Fi® and Bluetooth® connectivity provides seamless integration with smartphones, computers, and wireless headsets, while enabling convenient online firmware and repeater database updates. Designed for today's connected Amateur Radio operator, the Icom IC-7110 combines advanced digital features, powerful multi-band coverage, intuitive touchscreen operation, and state-of-the-art spectrum analysis tools into a compact, modern transceiver ready for home, portable, mobile, and emergency communications applications. Whether you're exploring HF DX, local VHF/UHF activity, digital modes, or D-STAR networking, the IC-7110 is built to keep you connected wherever your operating adventures take you.
Not Yet Reviewed
$35.00
Instant Rebate
ICOM IC-705 HF/50/144/430 MHz All Mode Portable Transceiver
Icom IC-705 HF/50/144/430 MHz All-Mode Portable Transceiver brings the advanced features of the IC-7300, IC-7610 and IC-9700 to a portable QRP package. It features SDR Direct Sampling technology for low noise and low distortion receiver performance and incredible voice and digital transmission capabilities. Along with the same color touch screen and high speed, high resolution of the real-time spectrum scope and waterfall display, the rich set of features in the IC-705 will easily place this radio as the "Best Ever" All-Band All-Mode Portable! Here are many of the advanced features of the Icom IC-705 Portable Transceiver: * "Base Station" performance in compact package that you can hold with one hand! * Dimensions (WHD): 7.9 x 3.1 x 3.3 in. (20.0 x 8.0 x 8.5 cm) * All-band All-mode Transceiver Capability: 160-6m+2m+70cm; SSB/CW/RTTY/AM/FM/DV (D-STAR) * Full D-STAR capabilities including DR mode and Terminal Mode/Access Point Mode * Send, receive and view images on the IC-705 with no application software required * "General Receive" coverage from MW through 148 MHz, 430-450 MHz * Receives AM and FM Broadcast Bands and Air Band * Output power is 10W on external 13.8V supply or 5W with included clip-in rear panel battery pack (BP-272 Li-ion); supports QRP and QRP operation down to 0.5 W * 4.3 in. color touchscreen display – same as used in the Icom IC-7300 and IC-9700 * High-speed, high-resolution, real-time spectrum scope and waterfall display * SDR Direct Sampling below 25 MHz and Down-conversion IF above 25 MHz * Built-In GPS tracking logger, repeater locator and finds nearby D-STAR repeaters * USB port (micro-B) for direct interface * Wireless LAN (802.11 b/g/n Wi-Fi) for remote operation * Bluetooth - supports smartphone linking, remote control and Bluetooth wireless headsets and headphones * microSD Card Slot (microSD card not included) * Includes HM-243 Speaker/Mic with multi-function buttons * Optional LC-192 Multibag Backpack for easy portable operations Note: A single BNC antenna connector functions for all bands
( 127 )
$1,298.95
On Sale
ICOM IC-V86 VHF FM Portable Handheld Transceivers
ICOM IC-V86 VHF FM Portable Handheld Transceivers give you more audio, more RF power, more coverage and more battery capacity in a compact, MIL-STD portable 2 meter HT. Producing 1500 mW of audio power to an improved chassis design and speaker, the IC-V86 lets you easily hear incoming signals in loud, noisy environments. The IC-V86 transmit coverage is expanded with 7W of RF output power and the new 2250mAh Li-Ion battery pack also provides longer operational capabilities. Useful features, functions and specs and of the ultra-rugged ICOM IC-V86 FM 2 meter HT: - Frequency Range - TX: 144-148 MHz, RX: 136-174 MHz - Output power - 7.0/5.5/2.5/0.5 W (EX Hi/Hi/Mid/Low) - Type of emissions - F2D, F3E (FM, FM-N) - Durable BNC female antenna connector - 200 memory channels, 6 scan edge channels and 1 call channel - Maximum Frequency Deviation: ±5.0 kHz/±2.5 kHz (FM Wide/ FM Narrow) - Selectable Volume Level, VFO/Memory Channel Selection Control - Integrated VOX function - Built-in CTCSS and DTCS Encode Decode and Tone Scan - IP54 Waterproof rating - IP67 Rating for dust-tight and waterproof protection - MIL-STD-810 -C,-D, -E and –F; passed environmental tests for pressure, temperature, sun, rain, humidity, salt fog, dust, vibration and shock - Dimensions (WHD) 2.3 × 4.4 × 1.2 in (58.6 × 112 × 30.5 mm) with supplied BP-298 battery pack - Made in Japan - Quality and Reliability Supplied Accessories (May differ, depending on transceiver version): - BP-298 Battery Pack - BC-240, Desktop Charger - BC-242, AC Charger Adapter - MB-124 Belt Clip - Antenna, BNC Rubber Whip
( 33 )
$129.95
—
$139.95
$116.96
—
$129.95
On Sale
ICOM IC-T10 VHF/UHF Dual-Band FM Handheld Transceivers
ICOM IC-T10 VHF/UHF Dual-Band FM Handheld Transceivers are the latest addition to Icom's Amateur handheld lineup reminiscent of the T70 HTs, based on the commercial-grade IC-F1000T series of radios. These direct conversion wideband VHF/UHF portable handhelds provide a stable 5 Watts RF output on the 2 meter and 70cm bands and they are FM broadcast receive capable; 88-108 MHz. The IC-T10 features include 200 channel memory, Priority Scan, Internal VOX and CTCSS / DTCS /DTMF Encoding, and high output audio, among many others, that will place this Icom HT at the top of the list!
( 29 )
$239.95
$169.00
ICOM Handheld Li-Ion Battery Packs
If you are in need of a new battery, or perhaps you want to upgrade, check out these ICOM handheld Li-Ion battery packs. Lightweight for easy portability, Lithium-Ion battery packs will supply more power for a longer time than standard packs. Available for several models, they will keep you operating for hours! You may just want to buy extra ICOM handheld Li-Ion battery packs to keep on hand for those "Oops, out of power!" moments!
( 29 )
$72.99
—
$155.99
On Sale
ICOM ID-50A VHF/UHF Multi-Function D-Star Handheld Transceivers
The ICOM ID-50A is a compact, dual band 2m/70cm digital transceiver that brings the fun of the D-STAR to life and includes functions to enhance your QSO experience making the ID-50A the perfect travel companion. The Band Scope and Waterfall displays can visually show active channels with a wide span and timeline, making it easy to find active channels by sight. The Dual-Watch function doubles QSO opportunities to monitor VHF/VHF, VHF/UHF, and UHF/UHF bands at the same time and can receive both FM and Air bands. The built-in GPS receiver displays the current grid square information and this GPS position data can be used for Position Auto Reply, Near Repeater Search and GPS log functions.
( 12 )
$499.95
$459.95
ICOM IC-R8600 Communications Receivers
ICOM IC-R8600 Communications Receivers represent the Next-Generation in World-Class Receivers! And the next step in SDR evolution! Why a Next-Generation, World-Class Receiver? While ordinary wide band receivers need to have dedicated demodulator circuits for each receive mode, the IC-R8600 utilizes advanced digital processes that demodulate the incoming signals. The IF signal is sent to the A/D converter, resulting in a digital signal, which is then processed by a high-speed FPGA (Field Programmable Gate Array) and DSP to be restored to an analog audio signal. The received signal is processed to be demodulated according to the receive mode, including not only conventional analog communications in CW, AM, SSB, FM, WFM and FSK, but also advanced digital communications such as D-STAR, P25, NXDN, dPMR and DCR. Of course, this is easily achieved by using Software Defined Radio (SDR) technology. Here is some additional Information for ICOM's IC-R8600 Wideband Communications Receiver with Multiple Digital-Mode Decoders: * 10 kHz to 3 GHz general coverage (YES! That's 3.0 GHz!) * Ultra-wide frequency coverage with RSSI (Received Signal Strength Indication) function * Fast moving, real-time spectrum scope and waterfall functions * Large 4.3 in. TFT color touch screen display * Decodes multiple digital protocols, including D-STAR, NXDN™, dPMR™ and APCO P25 * Cellular blocked * I/Q signal output for use with third-party SDR software and/or external decoding * Optional RS-R8600 PC remote control software allows control of all receiver functions * Clear audio quality using FPGA/DSP base architecture with Superheterodyne circuitry * SD card slot for received log, decode log and voice recording * Optional SP-39AD external speaker with integrated receiver power supply Additional features include: * PL-259 Antenna Connector * Type-N Antenna Connector * RCA Antenna Connector (500 ohms- for long wire antennas, etc.) * MUTE Input Jack- Use your R8600 with your favorite transmitter! * 10.7 MHz IF Output Jack * 10 MHz Reference Frequency Input/Output * I/Q Output Jack * Ethernet Connector * S-meter Output Jack * External Speaker Jack * AF/IF Output Jack * ICOM CI-V Remote Control Jack * USB Connector * DC Power Socket * DC IN Jack (12V nominal) * AUX Jack * Ground Terminal Note: Please look at the associated files under the "Documentation" tab for additional product information, including an instruction manual. ICOM's IC-7300 transceiver is renowned for its superior SDR receiver technology. Why not own a communications receiver based on that very same success? Order an ICOM IC-R8600 Communications Receiver for your SWL or Amateur Radio operations!
( 16 )
$2,799.95
—
$3,249.95
ICOM CX-10G 10 GHz Transverters
ICOM CX-10G 10 GHz Transverters are high-performance RF transmit and receive converters designed for amateur radio SHF enthusiasts and radio experimenters. Fully compatible with ICOM IC-905, the CX-10G Transverter converts 2.4 GHz IF signals to the 10 GHz band, opening a new range of frequencies for experimentation and communication. The CX-10G compact and lightweight unit that connects directly to, and is powered by the IC-905 RF Unit. This 0.5-watt output 10 GHz Transverter is also fully IPX5 waterproof for tower or tripod mounting at the antenna to limit cable loss. It features a built-in preamplifier and uses the RF Unit GPS signal for an ultra-stable local oscillator, ensuring excellent sensitivity and signal stability. A variety of protection circuits are built-in to prevent damage from overvoltage, overcurrent, and overheating. These transverters also include a range of useful features such as adjustable output power, a low noise figure and a built-in cooling fan to keep the unit operating smoothly even during extended use. Whether you are a seasoned SHF experimenter or a curious operator looking to explore the 10 GHz band, the Icom CX-10G 10 GHz Transverter is a powerful and reliable tool that is sure to impress. Along with the Icom IC-905, this transverter unit makes it easy to try the 10 GHz band and take your operations to the next level.
( 1 )
$1,199.95
ICOM IC-R15 Wideband Handheld Receivers
ICOM IC-R15 Wideband Handheld Receivers allow both the beginner and experienced user alike to discover the exciting world of radio reception. The IC-R15 covers a wide frequency range from 108 - 500 MHz, allowing you to receive a diverse array of radio signals, whether it's VHF Aeronautical Radio in AM, Amateur Radio on 2m and 70cm, Railway, Marine, or regional broadcast stations in AM/FM and Wideband FM (WFM) from 76 – 500 MHz. The versatile and reliable IC-R15, with its state-of-the-art technology and elegant design sets new standards and ensures that even users with minimal experience can quickly get on the air.
( 1 )
$559.95
On Sale
ICOM IC-718 HF All Band Transceivers
ICOM IC-718 HF All Band Transceivers make communicating with the world easy! The superior performance of these HF base transceivers allows you to make contacts over long distances--even to the other side of the world! With excellent receiver sensitivity, a wide dynamic range, high signal-to-noise ratio, and full-duty operation, the ICOM IC-718s offer the latest RF and digital technology in a compact size. Clean, clear audio is easily heard from the front-facing speaker and the IC-718s feature a minimum of switches and controls to simplify operation. Plus, a soft-touch 10-key pad allows for the direct entry of an operating frequency. These are great HF starter transceivers but they will also thrill the accomplished ham, because the IC-718s are very simple to use. The IC-718 HF All Band transceivers will definitely be the most practical DSP rigs you will ever own! They provide many useful features that you want and need--and the price isn't bad, either! Some quick specs: * 160 through 10 meter operation (60 meter channels not available) * Continuously adjustable RF power output -- 100 watts maximum to 2 watts minimum (SSB and CW modes) -- 40 watts to 2 watts (AM mode) * 30 kHz through 30 MHz general coverage receiver * 1 Hz frequency resolution * 101 memory-scan channels Other great features include: * Includes DSP noise reduction and auto notch (UT-106 module) * RF gain control * RF attenuator and preamplifier * Adjustable level noise blanker * IF shift control * Receiver Incremental Tuning (RIT) * Band stacking register * Tuning rate auto step-up function * Digital S/RF meter * VOX operation * Adjustable microphone audio compressor * Electronic CW keyer Note: For additional information, please look at the files under the "Documentation" tab. Supplied accessories include: * Hand-held microphone * DC power cable and spare fuses These little transceivers are great for portable use or as Field Day equipment. They also make great back-up transceivers for well-equipped ham shacks. New Ham or not, one of these IC-718s is a nice addition to any station. Order ICOM IC-718 HF All Band Transceivers from DX Engineering and enjoy some easy QSOs.
( 47 )
$1,099.95
$899.95
ICOM Mobile Transceiver Mounting Brackets
ICOM Mobile Transceiver Mounting Brackets provide for the mounting of your faceplate and/or radio unit for easier viewing and use. Sturdy metal brackets offer secure mounting. Many ICOM accessory mounting brackets are available individually or as a kit with a separation cable. Some brackets reuse original hardware supplied with the new radio and are supplied as brackets, only. Remote mount your control head and your main mobile transceiver units with help from ICOM Mobile Transceiver Mounting Brackets from DX Engineering.
( 57 )
$31.49
—
$183.99
On Sale
ICOM IC-R6 SPORT Communications Receivers
ICOM IC-R6 SPORT Communications Receivers have an ultra-wideband frequency range, covering from 100 kilohertz to 1,309.995 Megahertz. Even so, they provide superior sensitivity and selectivity characteristics that resist interference. A wide variety of utility and government communications, amateur radio stations, AM, FM, and short wave broadcast stations may be monitored with these receivers. A valuable feature, the Voice Squelch Control, opens the squelch only when a modulated signal is detected. It's a handy feature for listeners scanning for news, talk, and music--not data bursts or beacons. IC-R6 SPORTs have 100 channels per second of high-speed scan capability when in VFO mode. This superior scanning power provides efficiency when searching over 1,309 MHz of spectrum! With 1,300 alphanumeric memory channels, 50 scan edges, 200 auto-write memories, and 22 memory banks, ICOM IC-R6 SPORT Communications Receivers give you unparalleled scanning flexibility! These IC-R6 SPORTs are very energy-efficient! Power is supplied by two standard AA alkaline batteries. You may also operate the IC-R6 SPORT utilizing the optional DC car cord. Or use optional rechargeable NiMH cells with optional wall charger and perhaps the convenient drop-in stand. The power choices are all yours! Additional features include: * Built-in audio low-pass filter * Plus/minus 1.0ppm high-frequency stability at 25 degrees C * Ferrite bar antenna for AM broadcast * 150 mW loud audio with internal speaker * DTCS and CTCSS tone squelch and reverse tone squelch * Priority watch function with priority beep function * CI-V remote port for receiver control * PC-programmable with optional CS-R6 software * Receiver-to-receiver cloning with optional OPC-474 cloning cable * Auto power OFF-selectable 0.5-2 hours and end of busy signal * Compact, drip-resistant construction * Duplex operation monitoring * Automatic LCD backlight * Dial speed acceleration * Built-in RF attenuator * Auto memory-write scan stores the detected frequency, mode, and tone into a specified memory * Reversible up/down buttons and dial knob for volume, frequency, memory channel, scan direction, and set mode settings * Weather channel receive with WEATHER ALERT on the USA version only * Cellular coverage is BLOCKED in the USA version Note: For additional information, please look at the files under the "Documentation" tab. Supplied accessories: * Antenna * Belt clip * Hand strap OPTIONAL accessories: * BC-196SA wall charger (radio requires two Ni-MH AA cells, not included) * CP-18A DC car cord * BC-194 desktop drop-in base for use with BC-196SA or CP-18A * SP-27 tube (clear-stealth) earphone NOTE: IC-R6 receivers use an antenna with an SMA male connector. The receiver itself has an SMA female connector. These ICOM IC-R6 SPORT Communications Receivers hand you the world… quite literally in the palm of your hand! Thirty years ago, most of the features of these pint-sized portable communications receivers would have been found in only the highest-priced tabletop models. Many of their features didn't exist at all! Don't miss out on any of the action! For your handheld communications receiver needs, contact DX Engineering today for one of your own ICOM IC-R6 SPORT Communications Receivers!
( 11 )
$239.95
$195.95
ICOM Transceiver Plug-In Modules
ICOM transceivers have a plethora of built-in features. But, the fun doesn't have to stop there, with their line of Transceiver Plug-In Modules that add additional capabilities, including, Bluetooth Units, voice synthesizers, decoders, and D-STAR digital units.
( 13 )
$76.49
—
$101.99
ICOM RC-28 Remote Control USB Encoders
If you are tired of driving your remotely controlled ICOM rig with a mouse, then these ICOM RC-28 Remote Control USB Encoders are for you! These RC-28 controllers are an optional electronic encoder that functions as a companion to the RS-BA1 IP Remote Control Software. This unit connects to your PC via the included USB cable. Cleverly using the same tuning knob and digital encoder as used on ICOM HF radios, these accessory controls provide a more tactile option to accompany the control software. It really "feels" like you are tuning YOUR RADIO! These electronic controls include a push-to-talk switch and two additional programmable function keys. Program one to activate antenna tuning! The RS-BA1 software requires a free patch to be downloaded in support of this device if yours is earlier than version 1.3. Don't rely on tuning your remotely-controlled radio with a mouse. Order your ICOM RC-28 Remote Control USB Encoders from DX Engineering and use a better mouse trap!
( 21 )
$339.99