Hot Deals

Manufacturer Rebate

ICOM IC-9700 VHF/UHF/1.2 GHz Transceiver

ICOM IC-9700 VHF/UHF/1.2 GHz All-Mode Direct Sampling Transceiver features advanced technology. Built with the VHF/UHF weak signal operator in mind, the IC-9700 has an RF direct sampling receiver for the 2m and 70cm bands, and a single down conversion IF from 311 – 371MHz for the 23cm band. This combination design provides a quiet receiver using Icom's DSP technology. This is an excellent all-mode transceiver with which to cover all operating facets of the 2 meter, 70 cm and 23 cm bands! Features for the ultra-advanced Icom IC-9700 include: * Direct-Sampling SDR design * RF Output of 100 Watts on 2m (144-148 MHz), 75 Watts on 70cm (430-450 MHz) and 10 Watts on 23 cm (1240-1300 MHz) * All modes including FM, SSB, AM, CW, RTTY, Digital, D-Star Digital Voice and Digital Data * Digital Data (DD) mode provides 128 kbps data communication * D-STAR Terminal and Access Point mode (RS-MS3A/W) * Dual D-STAR receive (decodes two voice streams simultaneously) * Main and Sub RX * Full Duplex operation/ Dual Watch (no V/V or U/U Capability) * Smooth satellite operations with normal/reverse tracking and 99 satellite channels * Supports 2 wave simultaneous reception (different bands/same or different mode) * High definition Real-Time 4.3 inch TFT display * Touchscreen interface (LCD touch-screen control) * Main or Sub-Band Scope (Center/Fix mode +/-500kHz Center Mode) * Audio Scope * CW full break-in * 0.5ppm frequency stability * Voice Recording/playback function (SD Memory Card) * Ethernet Port - Internal Server for Internet remote control with optional RS-BA1 software * USB audio and control connection * DR Memories: 2,500 * Antenna connectors: 2m SO-239, 70cm Type N, 1.2 GHz Type N More information at the More Details link below. Explore new horizons and space communications with the ICOM IC-9700 VHF/UHF/1.2 GHz Transceiver.

4.73 out of 5 stars ( 127 )

$2,099.95

Manufacturer Rebate

ICOM IC-7760 HF/50MHz All Mode Base Transceivers

ICOM IC-7760 HF/50MHz All Mode Base Transceivers feature an ALL NEW innovative shack style consisting of a remote control head and separate RF deck, connected with a commercially available control (LAN) cable. This concept increases the flexibility of your station installation, making more space available on the desktop by placing the RF deck in an area closer to the antenna feed point. In addition to the direct connect feature, control head to RF deck, allows you to utilize your home network to make any tabletop your shack, and a PC is not required!

4.2 out of 5 stars ( 10 )

$6,999.95

Instant Rebate

Kenwood TH-D75A Tri-Band 144/220/430 MHz D-Star/APRS Handheld Transceivers

Kenwood TH-D75A Tri-Band 144/220/430 MHz D-Star/APRS Handheld Transceivers take a significant leap forward with cutting-edge features designed to enhance the user experience for Amateur Radio operators. Building on the success of its predecessor, the TH-D74, this advanced model boasts simultaneous reception of 2 D-STAR signals, Reflector Terminal Mode for accessing D-Star reflectors, enhanced voice guidance, built-in GPS, digipeater functions, as well as an APRS® Standalone Digipeater. Usability has been prioritized in the design of the TH-D75A, incorporating modern conveniences such as a USB Type-C port for serial communications, audio in/out and battery charging. The inclusion of Bluetooth headset PTT support enhances the hands-free operation of the transceiver. Its fully ergonomic design ensures a comfortable and intuitive user experience that caters to the evolving needs of today's Amateur Radio operators.

4.85 out of 5 stars ( 26 )

$699.95

Manufacturer Rebate

ICOM ID-52A PLUS VHF/UHF Multi-Function D-Star Handheld Transceivers

ICOM ID-52A PLUS VHF/UHF Multi-Function D-Star Handheld Transceivers build upon its popular predecessor (ID-52A) and brings with it updated features that will delight amateur enthusiasts both at home and in the field. This upgraded handheld transceiver now features Enhanced Bluetooth® connectivity, which will allow you to connect to an Android device in Terminal and Access Point Modes, Dual operation of Terminal Mode and simplex/repeater operations and finally, an Updated USB-C charging/data port for faster connections and charging. This feature packed transceiver will allow you to enjoy portable operations like you've never seen before. The large 2.3 in. 230 X 280 pixel color display offers more information, an improved interface, with an industry-first color waterfall band scope for a VHF/UHF portable. The integrated speaker provides a booming 750mW of output so you never miss a contact. Additionally, the integrated Bluetooth allows for connectivity with a wide variety of external audio devices. New Features: - Enhanced Bluetooth® – Connect your Android™ in Terminal and Access Point Modes - Dual operation of Terminal Mode and simplex/repeater operations - Updated USB-C charging/data port for faster connections and charging

5.0 out of 5 stars ( 6 )

$749.95

Manufacturer Rebate

Icom IC-7610-32 HF Plus 50 MHz All Mode Transceivers

Icom IC-7610-32 HF Plus 50 MHz All Mode Transceivers feature internal component updates to ensure the highest performance from these true dual-receive transceivers. RF Direct Sampling takes you to the next level with advanced dynamic range performance and true dual receivers in the Icom IC-7610-32 transceiver. Whether it is poor band conditions or battling to pick out a call in a large pile-up, faint signals have always been a challenge for DXers and Contesters around the world. The difference between putting the QSO in the log or having to try another time is the combination of your skill as an operator and the capability of your receiver. One key factor, measured as RMDR, Reciprocal Mixing Dynamic Range, is the receiver's ability to pick out a faint signal in the presence of stronger, adjacent signals. The IC-7610-32 introduces dual RF direct sampling receivers that achieve 110dB RMDR, rivaling the performance of top-of-the-line transceivers. This model transmits on the Amateur bands 160 through 6 meters with 100 watts output on all modes, except 25 watts on AM, with full dual receiver coverage from 30kHz to 60MHz.

4.75 out of 5 stars ( 4 )

$3,999.95

Instant Rebate

Yaesu FT-65R 144/430 MHz Dual-Band HTs

Yaesu FT-65R 144/430 MHz Dual-Band HTs are very compact, ruggedly constructed handheld VHF/UHF rigs with three selectable power settings of 5W, 2.5W, or 0.5W. Their big front panel speaker provides a full 1 watt of crisp, clear audio. These units come supplied with a 1950mAh Li-ion battery pack capable of providing over 9 hours of operation. An optional, higher-capacity 2500mAh Li-ion battery is available for over 11.5 hours of operating time. A 2.5 hour rapid charger comes standard, making the transceiver ready to operate at any time. Yaesu's newly designed large, white LED displays are vibrant and highly visible. Four Quick Recall Keys (QRK) are user programmable to instantly recall favorite channels with just the push of a button. Other useful features include: versatile scanning capabilities, such as Programmable VFO Scan, Memory Scan, Priority Channel Scan, and Weather Alert Scan; WX Channels with "Severe Weather" Alert, PC Programming, Transceiver-to-Transceiver Cloning, FM Broadcast Receiver, Automatic Range Transponder System (ARTS), CTCSS/ DCS Operation, Busy Channel Lockout (BCLO), Automatic Power Off feature, and Transmitter Time Out Timer (TOT). VOX operation is available with the optional Earpiece Microphone SSM-512B. * Commercial Grade VHF / UHF: FT-65R transceivers are built to commercial grade standards, including their IP54 Rating for Dust and Water protection. MIL-810-C, D and E standards make these radios suitable for operation in the harshest of environments. * Powerful Output: With 5 Watts of reliable RF output power, this radio is sure to be heard. Never miss a call with One Watt of crisp, clear audio output from the oversized front panel speaker. * High Capacity Li-Ion battery: FT-65R transceivers are packaged with a powerful 1950 mAh Li-Ion battery pack, providing the radio with over 9 hours of operating time. Or upgrade to the optional high-capacity 2500 mAh Li-Ion battery pack for over 11.5 hours of extended operating time. To ensure minimal down time, FT-65R transceivers also come packaged with a 3.5-Hour rapid charger. * QRK (Quick Recall Key): Four Dedicated User-programmable Keys serve as shortcut keys to preferred menu options, or use the four dedicated recall keys to easily store and recall desired frequencies. * Versatile Scanning Capabilities: Programmable VFO Scan scans all channels in the desired frequency range; Memory Scan allows scanning of user selectable frequencies; Priority Channel Scan can be used to scan memory channels while making one channel a priority. Weather Alert Scan alerts the user when severe weather is approaching. * PC Programmable: These radios are capable of being programmed directly from a PC, making all of the advanced setup features a breeze! Use the optional software and SCU-35 programming cable to make programming a snap. * More advanced features: Tons of advanced features are loaded into this compact radio, including: Transceiver to Transceiver cloning with the optional SCU-36 clone cable, FM Band receiver equipped, ARTS (Automatic Range Transponder System), DTMF operation, CTCSS/DCS operation, TOT (time out timer), and more. Note: For additional information, please look at the files under the "Documentation" tab. For really versatile dual-band FM operation, consider one of these Yaesu FT-65R 144/430 MHz Dual-Band HTs from DX Engineering!

4.71 out of 5 stars ( 105 )

$119.95

On Sale

Instant Rebate

RigExpert Antenna Analyzers

RigExpert Antenna Analyzers are powerful antenna analyzers designed for testing, checking, tuning, or repairing antennas and antenna feed-lines. Mainly, these are SWR (Standing Wave Ratio) and impedance measurement instruments (vector impedance analyzers). Their large, bright LCD screens provide graphic illustration of SWR, impedance; return loss, and much more. Easy to use measurement modes, as well as additional features such as connection to a personal computer (to plot SWR, R, X and Smith charts, etc.); make RigExpert Analyzers attractive for professionals and hobbyists alike. They are compatible with several operating systems, including Windows© 10, 11 and Mac, with software download*. The graphic display of various parameters over a wide frequency range is a key feature of these analyzers. This significantly reduces the time required to adjust an antenna. ZOOM models allow you to zoom-in on graph points for clearer analysis. USB connection allows export of sweep files with Antscope for Android or Antscope2 software to PC or MAC. *(download from the manufacturer https://rigexpert.com/products/software/). Many models have Bluetooth for direct file transfer for galvanic isolation without a USB cable, which provides the most accurate measurements. RigExpert Antenna Analyzers are available in several models with greater frequency range of operational features. Some have SO-239 UHF female connector, except for most models that operate at 230 MHz and above that have a Type N female connector. An array of options are available to cover almost any need for the professional and the Amateur. The following tasks are easily accomplished by using RigExpert Antenna Analyzers: * Rapid check-out of an antenna * Tuning an antenna to resonance * Antenna SWR and impedance measurement and comparison before and after a specific event (rain, hurricane, winter, etc.) * Making coaxial lines or measuring their parameters * Cable testing and fault location * Measuring capacitance or inductance of reactive loads *Send data to laptop for larger graphical display and further analysis. Note: For additional product information, please look at the files under the "Documentation" tab. When you need a versatile antenna analyzer for Amateur Radio or professional use, you'll find that one of these RigExpert Antenna Analyzers, from DX Engineering, will be well suited to the task!

4.81 out of 5 stars ( 513 )

$534.95

$379.95

—

$999.95

Instant Rebate

Manufacturer Rebate

ICOM IC-705 HF/50/144/430 MHz All Mode Portable Transceiver

Icom IC-705 HF/50/144/430 MHz All-Mode Portable Transceiver brings the advanced features of the IC-7300, IC-7610 and IC-9700 to a portable QRP package. It features SDR Direct Sampling technology for low noise and low distortion receiver performance and incredible voice and digital transmission capabilities. Along with the same color touch screen and high speed, high resolution of the real-time spectrum scope and waterfall display, the rich set of features in the IC-705 will easily place this radio as the "Best Ever" All-Band All-Mode Portable! Here are many of the advanced features of the Icom IC-705 Portable Transceiver: * "Base Station" performance in compact package that you can hold with one hand! * Dimensions (WHD): 7.9 x 3.1 x 3.3 in. (20.0 x 8.0 x 8.5 cm) * All-band All-mode Transceiver Capability: 160-6m+2m+70cm; SSB/CW/RTTY/AM/FM/DV (D-STAR) * Full D-STAR capabilities including DR mode and Terminal Mode/Access Point Mode * Send, receive and view images on the IC-705 with no application software required * "General Receive" coverage from MW through 148 MHz, 430-450 MHz * Receives AM and FM Broadcast Bands and Air Band * Output power is 10W on external 13.8V supply or 5W with included clip-in rear panel battery pack (BP-272 Li-ion); supports QRP and QRP operation down to 0.5 W * 4.3 in. color touchscreen display – same as used in the Icom IC-7300 and IC-9700 * High-speed, high-resolution, real-time spectrum scope and waterfall display * SDR Direct Sampling below 25 MHz and Down-conversion IF above 25 MHz * Built-In GPS tracking logger, repeater locator and finds nearby D-STAR repeaters * USB port (micro-B) for direct interface * Wireless LAN (802.11 b/g/n Wi-Fi) for remote operation * Bluetooth - supports smartphone linking, remote control and Bluetooth wireless headsets and headphones * microSD Card Slot (microSD card not included) * Includes HM-243 Speaker/Mic with multi-function buttons * Optional LC-192 Multibag Backpack for easy portable operations Note: A single BNC antenna connector functions for all bands

4.95 out of 5 stars ( 127 )

$1,399.95

Icom IC-7110 HF/VHF/UHF All Mode Transceiver Reservation

Introducing the new Icom IC-7110, a versatile all-band, all-mode transceiver engineered for Amateur Radio operators who demand premium performance across every operating environment. Covering HF, 50 MHz, 144 MHz, and 430/440 MHz bands with support for SSB, CW, RTTY, AM, FM, and D-STAR digital voice operation, the IC-7110 delivers powerful 100-watt output on HF and 50 MHz and 50 watts on VHF/UHF. Its advanced dual-receiver architecture enables true HF/VHF or HF/UHF dual-watch capability, allowing operators to monitor multiple bands simultaneously while maintaining independent operating modes for each receiver. At the heart of the IC-7110 is a large 4.3-inch color touchscreen display featuring a real-time spectrum scope and waterfall display. Instantly identify open frequencies, monitor band activity, and visually track signal movement across the band with exceptional clarity. Whether chasing DX, contesting, or monitoring local repeaters, the intuitive display keeps critical operating information within easy reach. Digital mode enthusiasts will appreciate the IC-7110's simplified FT8 setup, which automatically configures the radio for FT8 operation with a single preset selection. Additional customizable presets provide flexibility for future digital modes, streamlining station setup and reducing configuration time. CW operators benefit from the integrated CW decoder technology derived from Icom's acclaimed IC-7300 series, offering adjustable decoding parameters to optimize performance under varying band conditions. The IC-7110 also delivers comprehensive D-STAR functionality, including DR mode, Terminal Mode, Access Point Mode, DV repeater monitoring, and even picture transmission and reception directly from the radio. Built-in Wi-Fi® and Bluetooth® connectivity provides seamless integration with smartphones, computers, and wireless headsets, while enabling convenient online firmware and repeater database updates. Designed for today's connected Amateur Radio operator, the Icom IC-7110 combines advanced digital features, powerful multi-band coverage, intuitive touchscreen operation, and state-of-the-art spectrum analysis tools into a compact, modern transceiver ready for home, portable, mobile, and emergency communications applications. Whether you're exploring HF DX, local VHF/UHF activity, digital modes, or D-STAR networking, the IC-7110 is built to keep you connected wherever your operating adventures take you.

Not Yet Reviewed

$35.00

On Sale

Alinco DM-30 Digital Power Supplies

Alinco DM-30 Digital Power Supplies are an affordable switching power supply that packs a lot of features, including Anderson Powerpole connectors. They are an ultra-compact, lightweight design that supports 9-15 V DC variable output and delivers up to 30A peak power to 2-way radio communication products. Alinco DM-30 power supplies are available for 120 V AC input as their DM-30TR or for 230 V AC input as their DM-30ER (E for Europe). A convenient feature for Amateur Radio users: an adjustable Noise Offset Circuit moves unwanted switching noise to another frequency. Other features include: a large illuminated digital Volt/Amp meter, a pair of rear panel binding posts (30A peak), front panel Anderson Powerpole connectors (two pairs 5A peak), switch-selected voltage adjust (9-15 V) or fixed at 13.8 V, ripple less than 80mVp-p and triple circuit protection for short-circuit, over temperature, and current limiting. Alinco DM-30 Digital Power Supply features: * A highly visible, accurate digital Volt / Amp meter allows real-time monitoring of the output current * Two pairs of Anderson Powerpole connectors on the front panel (DM-30TR) add extra versatility * A pair of Banana Jack connectors on the front panel (DM-30ER) adds extra versatility * The Noise Offset Circuit moves unwanted switching noise to another frequency * Designed with reliability in mind, a durable cooling fan keeps DM-30 running continuously under heavy loads * Rear output terminals are large and provide an efficient Max 30A power transfer to your equipment Alinco DM-30 specifications: * Input voltage: 120 V AC 50/60Hz (DM-30TR) * Input voltage: 230 V AC (DM-30ER) * Output voltage: 9 to 15 V DC variable or select voltage fixed at 13.8 V * Output current 20A continuous at 13.8 V DC * 30A max (50 percent duty cycle, 1-minute intervals) * Output voltage regulation: Less than 2 percent variance to full load * Ripple voltage: Less than 80mVp-p * Protection: Over current, over temperature, and short circuit * Fuse protection: DM-30TR, 8A (DM-30ER, 5A) * Dimensions: (W x H x D) 6.10 x 2.80 x 8.07 in. (155 x 75 x 205 mm) * Weight: Approximately 3.53 lbs. (1.6kg) with AC cord Note: For additional product information, please look at the files under the "Documentation" tab. Alinco power supplies offer good value for your ham-radio dollar. Why not upgrade to a switching power supply specifically designed for Amateur Radio? Order Alinco DM-30 Digital Power Supplies from DX Engineering to add versatility, convenience and quality to your shack's DC power!

4.66 out of 5 stars ( 82 )

$145.95

$134.95

ACOM 2000A Automatic HF Linear Amplifiers

ACOM 2000A Automatic HF Linear Amplifiers are the world's most advanced amplifiers designed specifically for hams. These amplifiers were the first to include fully-automatic tuning and sophisticated digital-control capabilities. ACOM's revolutionary 2000A amplifiers deliver maximum legal power in all modes and operate on all amateur HF bands 160 to 10 meters. Be sure to read the SPECIAL Note, below. These amplifiers follow your transceiver's band and frequency automatically in far less than a second. No special cables are required: Just a "dit" on CW or "AHH" on SSB is enough for instant band and band segment changes. ACOM 2000A amps break every amateur band into multiple frequency segments. The user can store up to ten (10) sets of tuning adjustments for every frequency segment - allowing individual settings for multiple antennas on each band. By completely eliminating time-consuming tune-up procedures, ACOM 2000A linear amplifiers give contesters a real edge. At the core of the ACOM 2000A is a classic HF amplifier design that employs two matched 4CX800A high-performance ceramic-metal tetrodes for maximum efficiency. ACOM uses these rigorously tested tubes with today's most advanced digital control technology to create an amplifier with outstanding performance, features and reliability. Measured third and fifth order IMD are typically 40dB and 45dB down, respectively. Typical harmonic emissions are as low as -55dBc (second) and below -70dBc (for third and above). Thus, probability of QRM, BCI or TVI is dramatically minimized. ACOM's 2000A remote diagnostic features and modular design ease fault isolation and repair. The protection system makes damaging one of these amplifiers difficult. Information on the 12 most recent protection trips is stored in an INFO BOX for remote diagnostics via phone line, PC, and Internet. Full break-in (QSK) is based on a built-in vacuum relay. Transmit/receive switching sequence is secured by a dedicated microprocessor. * Frequency Coverage: All Amateur Bands 1.8-29.7 MHz * Power Output: 1,500W PEP, 1,500W continuous carrier (the external auxiliary fan must be installed for operations of continuous carrier transmissions longer than 15 minutes * Hum and noise: Better than 35dB below rated output * Harmonics Output Suppression: Better than 50dB below rated output * Input and Output Impedance: Nominal values: 50 Ohm unbalanced output; Input circuit: broadband, VSWR less than 1.3:1, 1.8-29.7 MHz Amateur Bands (no tuning, no switching); Relay Bypass Throughput: VSWR less than 1.1:1, 1.8-29.7 MHz Amateur Bands * Automatic Tuning: Load Impedance Matching - less than 3 seconds; Band Change - less than one second; Segment Change - less than 0.2 seconds * RF Gain: 14.5dB, frequency response less than 0.5dB (50 to 60W drive power for rated output) * ALC: grid-current derived, -11V max, rear panel adjustable * Primary Power: 180-264V (200, 220 and 240V nominal taps, 10 percent tolerance), 50-60Hz, single phase, 3,500VA consumption at rated output * SPECIAL Note: Order part number AOM-2000A to wire the AC plug yourself; order part number AOM-2000A-240 for pre-wired 240 volt operation * Complies CE safety and electromagnetic compatibility requirements, as well as FCC regulations * Size: W 17.3 x 19.7 x H 7.1 in. Weight: 36 kg * Operating environments: temperature range: 0 to 50 degrees C; Humidity: up to 95 percent at 35 degrees Celsius * Altitude: up to 3,000m above sea level without output degradation Note: For additional information, please look at the files under the "Documentation" tab. Get the most advanced legal-limit HF amplifier for your shack. Order ACOM 2000A Automatic HF Linear Amplifiers from DX Engineering… today! Note: During and after your amplifier's warranty period, DX Engineering can direct you to the appropriate location for repairs for ACOM amplifiers. That facility will charge a repair fee for services outside the warranty period.

5.0 out of 5 stars ( 9 )

$6,374.99

—

$8,935.98

Manufacturer Rebate

ICOM IC-PW2 HF/50 MHz, ALL Band 1kW Linear Amplifiers

The ICOM IC-PW2 HF/50 MHz ALL Band 1 kW Linear Amplifier is a high performance, multi-function linear amplifier and is considered one of the key pieces of equipment for keen competition in DX hunting and contesting. Featuring high power and full duty cycle operation, the IC-PW2 uses new 65V LDMOS power transistors (MRFX1K80HR5) and a high-efficiency power supply to achieve a full 1kW output with a 200VAC Input. The IC-PW2 instantly operates at full power once turned on. Use the IC-PW2 for long contest hours or full-duty FT8 operation. Experience linearity and clean transmission with Digital Pre-Distortion (DPD) Technology with IC-7610. This technology corrects the signal distortion from the IC-PW2, by applying inverse distortion to the output signal from the IC-7610 exciter in advance

4.33 out of 5 stars ( 6 )

$5,499.95

XS Power AGM Batteries

XS Power AGM batteries are some of the lightest batteries on the market. Independent test results have proven that they outperform other battery models that outweigh these power providers by up to 20 lbs. Cutting-edge lead acid battery technology produces more energy in a smaller space because each cell is compressed before case insertion, resulting in efficient power-producing packages that are completely sealed with no need to ever add water. This design is ideal for the abuse, making these the batteries of choice for demanding applications who need top performance and reliability. When you are pushing to power the impossible, you need the non-stop capabilities of the XS Power AGM batteries best suited for your application. Product features include: * Designed to be an inch shorter than what the competition offers for fitting in places where space is at a premium * Deep-cycling ability and ultra-low internal resistance results in high cranking amps and excellent vibration resistance * Variable position mounting (except upside-down) thanks to the no-spill design * Offered in 6 V, 12 V, 14 V, and 16 V models

Not Yet Reviewed

$439.99

Optima BlueTop Deep Cycle Marine 12-Volt Batteries

Optima BlueTop marine deep cycle 12 V batteries can extend your mobile radio operation to the “field”! Deep-cycle batteries in general are better for communications as they can withstand long periods of slow discharge, as well as being a source for long-lasting portable power. Optima BlueTops offer 55 amp-hour or 75 amp-hour versions depending on model chosen. They’re completely spill-proof, sealed units that may be used indoors safely. They are mountable in most any position and have more than 15 times the vibration resistance of regular lead-acid batteries, which is crucial for your off-road and marine applications. Along with their Spiralcell technology, these AGM batteries operate over a broader temperature range and they weigh less than standard batteries. Additionally, these top-of-the-line battery models are perfectly suited to portable, mobile, marine or emergency preparedness radio operations, anywhere! Why? Because Optima BlueTops offer you 3 times more recharges than standard lead-acid batteries. Get on the move; take your radio from your vehicle to your boat to the great outdoors with the power of Optima BlueTop marine deep cycle 12 V batteries.

5.0 out of 5 stars ( 1 )

$399.99

On Sale

Alinco DM-530T Digital Power Supplies

Alinco DM-530T Digital Power Supplies pack a lot of features into an affordable communications-grade package. The output voltage of the DM-530T switching power supply is adjustable from 5-15VDC, or 13.8VDC fixed and can deliver up to 30A max current. Built-in triple circuit protections exist for short-circuit, over temperature and current limiting. The Noise Offset Circuit helps to reject switching-noise on the receive frequency by moving unwanted switching noise to another frequency. The large, highly visible and accurate digital Volt/Amp meter allows effortless real-time monitoring of output current. Other features of the Alinco DM-530T include: * Auxiliary 30A Output Terminals and USB Ports - Added front panel Anderson Power Pole ® terminals and USB ports provide versatile, quick connections. * Large Binding Posts - The main output terminals are large enough to provide an efficient power transfer to your equipment * Forced Air Cooling - Designed with reliability in mind, a durable cooling fan keeps DM-530 running continuously under heavy loads.

4.5 out of 5 stars ( 12 )

$239.95

$229.95

On Sale

ICOM IC-V3500 2M VHF FM Mobile Transceivers

Experience the state-of-the-art refinements of the new ICOM IC-V3500 VHF FM Transceiver boasting enhanced features and a rugged, easy-to-use design. The white, backlit LCD features a spacious layout that enhances readability and reduces eyestrain. This 2M analog FM mobile transceiver can transmit from 144-148 MHz at a full 65 W of stable output power and receive from 136-174 MHz. Enjoy new features like instant mute and crisp speaker output with the new Audio Volume Boost feature and new emergency safety functions that are required for some commercial use applications

4.6 out of 5 stars ( 10 )

$239.95

$211.16

—

$234.95

On Sale

RigExpert MATCH RFE Upgrade License

The RFE license is designed for professionals and enthusiasts working with radiofrequency (RF) systems, offering enhanced functionality for antenna and cable analysis. With this license, users can extend the operational range of their MATCH up to the 500 MHz RF band, making it ideal for a wide array of applications in telecommunications, broadcasting, and electronics diagnostics. The RFE license is tailored for: - RF engineers and technicians diagnosing and maintaining transmission lines. - Network professionals optimizing antenna systems. - Hobbyists and researchers delving into RF analysis within the licensed frequency range. Unlock an important features of the RFE license: TDR Chart Mode – utilize Time Domain Reflectometry (TDR) for fault detection and analysis. This mode allows users to locate faults in transmission lines by sending a short electrical pulse or a step function along the cable. Observing the reflected pulse to calculate Distance to Fault (DTF) using delay measurements, speed of light, and cable velocity factors. Interpreting the amplitude and shape of reflected signals to assess fault characteristics. The RFE license enhances the MATCH analyzer with the LC Meter, enabling precise measurements of Inductance (L), Capacitance (C), Quality Factor (Q), and Loss Tangent (tan δ). This powerful feature offers detailed insights into RF components, allowing for accurate analysis and optimization. User OSL Profiles: Supports up to 10 User Open-Short-Load (OSL) profiles, enabling precise calibration for accurate measurements for different cable lengths, connectors and adapters.

5.0 out of 5 stars ( 4 )

$200.00

$170.00

On Sale

ICOM IC-718 HF All Band Transceivers

ICOM IC-718 HF All Band Transceivers make communicating with the world easy! The superior performance of these HF base transceivers allows you to make contacts over long distances--even to the other side of the world! With excellent receiver sensitivity, a wide dynamic range, high signal-to-noise ratio, and full-duty operation, the ICOM IC-718s offer the latest RF and digital technology in a compact size. Clean, clear audio is easily heard from the front-facing speaker and the IC-718s feature a minimum of switches and controls to simplify operation. Plus, a soft-touch 10-key pad allows for the direct entry of an operating frequency. These are great HF starter transceivers but they will also thrill the accomplished ham, because the IC-718s are very simple to use. The IC-718 HF All Band transceivers will definitely be the most practical DSP rigs you will ever own! They provide many useful features that you want and need--and the price isn't bad, either! Some quick specs: * 160 through 10 meter operation (60 meter channels not available) * Continuously adjustable RF power output -- 100 watts maximum to 2 watts minimum (SSB and CW modes) -- 40 watts to 2 watts (AM mode) * 30 kHz through 30 MHz general coverage receiver * 1 Hz frequency resolution * 101 memory-scan channels Other great features include: * Includes DSP noise reduction and auto notch (UT-106 module) * RF gain control * RF attenuator and preamplifier * Adjustable level noise blanker * IF shift control * Receiver Incremental Tuning (RIT) * Band stacking register * Tuning rate auto step-up function * Digital S/RF meter * VOX operation * Adjustable microphone audio compressor * Electronic CW keyer Note: For additional information, please look at the files under the "Documentation" tab. Supplied accessories include: * Hand-held microphone * DC power cable and spare fuses These little transceivers are great for portable use or as Field Day equipment. They also make great back-up transceivers for well-equipped ham shacks. New Ham or not, one of these IC-718s is a nice addition to any station. Order ICOM IC-718 HF All Band Transceivers from DX Engineering and enjoy some easy QSOs.

4.89 out of 5 stars ( 47 )

$1,099.95

$899.95

On Sale

Alinco DR-CS25T 1.25m / 222 MHz FM Mobile Transceivers

Alinco DR-CS25T 1.25m / 222 MHz FM Mobile Transceivers are ultra-compact and come loaded with useful high-tech features that make the operation of this transceiver smooth and easy. Its large, color-selectable LCD display is easy to read and the multi-function back-lit handheld microphone with a DTMF keypad enables direct frequency entry and remote control. The DR-CS25T features excellent transmit/receive audio, 200 memory channels, frequency and channel scanning capabilities and more. Affordable and easy to use, the all-new DR-CS25T will offer everything you expect from a 222 MHz mobile transceiver. Alinco DR-CS25 Features: - Output power selectable 50W / 25W / 10W - PC-programmable 200 channel - Alphanumeric name tags - Wide variety of selective calling features - Built-In, 2-Tone/5-Tone, 51 CTCSS, 1024 DCS, 4 Tone-burst tones and DTMF / ANI decode - Large, bright LCD and easy-to-operate backlit microphone keys - Multi-function microphone enables direct frequency entry & remote control - Various scan modes, Key lock, Wide / Narrow operations and more! - Clean, clear Alinco audio

3.91 out of 5 stars ( 11 )

$259.95

—

$269.95

$246.95

—

$259.95

Special Offer

Milwaukee M12 Underhood Lights

Milwaukee M12 underhood lights offer specialty lighting that shines brighter, grips stronger, and protects longer. They deliver full engine coverage and clarity with a solid, non-damaging grip, better positioning, and a light bar that can be rotated, slid, removed, or hung for added flexibility and versatility. Tackle your challenging task and trade-specific lighting demands with Milwaukee M12 underhood lights. They're available individually; battery and charger are sold separately or in a kit, when listed. Features include: * TRUEVIEW high-definition output provides neutral, color-accurate lighting * High mode—1,350 lumens/4 hours * Low mode—600 lumens/8 hours * FINISHGUARD hooks provide lasting protection against scratches to your vehicle's finish * 2 times more gripping surface for maximum hold * Mounting hooks extend from 47 in. to 78 in., covering wide cars and trucks * Light bar with stainless steel hook * Sturdy aircraft aluminum frame * Impact and chemical-resistant lens * M12 REDLITHIUM XC 4.0 extended capacity battery pack offers up to 8 hours of run-time (available separately or in kit) * M12 battery charger (available separately or in kit) * 5-year tool warranty * Limited lifetime LED warranty

Not Yet Reviewed

$219.99

Instant Rebate

Yaesu FT-4XR VHF/UHF Dual Band FM Handheld Transceivers

Yaesu FT-4XR VHF/UHF Dual Band FM Handheld Transceivers are the ultimate budget-friendly choice for compact design and reliability, providing up to 5 watts of stable and reliable output power, hour after hour! These rugged handheld transceivers have 1.4 in. front speakers that deliver 1 watt of powerful, clear and crisp, intelligible audio. The FT-4XR (Dual Band VHF/UHF) and the FT-4VR (Single Band VHF) share the same core feature set and are identical in appearance. FT-4XR HTs include an extraordinarily robust package of features and specifications: * Over 15 hour operating time (5:5:90 duty cycle)* with the supplied 1,750mAh Li-ion battery pack * 3.5 hour rapid charger included * Selectable frequency step from 5 kHz * Two quick programmable keys for quick access to favorite functions * 200 memory channels; three Home Channels and 10 pairs PMS channels * Two different frequencies in one memory channel (one for RX another for TX) user-settable * Versatile scanning capacities including VFO scan, Memory scan, Programmable Memory scan (PMS), Memory Bank Scan and Dual Receive * Lockout for Keypad/PTT Lockout to prevent accidental changes or transmission * VOX Operation with the optional VOX headset * Optional cloning cable and cloning feature allows memory and configuration data from transceiver to transceiver * PC Programmable with optional programming cable * FM Broadcast Receiver * CTCSS/ DCS Operation * Time-out-Time (TOT) * Compact size: 2.1 x 3.5 x 1.2 in. (WHD) For more detailed features and specifications, please click "More Details" to see Documentation and additional images.

4.72 out of 5 stars ( 36 )

$109.95

Optima YellowTop Deep-Cycle 12-Volt Batteries

Optima YellowTop deep cycle 12 V batteries can help power your passion for Amateur Radio! Every ham operator needs a plan for emergency power. Optima YellowTop AGM batteries can be quickly recharged, operate over a broad temperature range, and their ability to recover from the deepest discharge approaches that of wet NiCds, but with less maintenance and a lower life cycle cost. Plus, Optima’s Spiralcell technology and sealed construction make them a good fit for auxiliary power sources for emergency communications, because they’re safe for indoor use with your sensitive radio equipment. They offer two times longer life and 15 times the vibration resistance of standard lead-acid batteries, plus they are spill-proof and powerful. What’s your plan for backup power? For an effective emergency power system, be sure to include Optima YellowTop deep cycle 12 V batteries.

5.0 out of 5 stars ( 1 )

$419.99

On Sale

ICOM IC-T10 VHF/UHF Dual-Band FM Handheld Transceivers

ICOM IC-T10 VHF/UHF Dual-Band FM Handheld Transceivers are the latest addition to Icom's Amateur handheld lineup reminiscent of the T70 HTs, based on the commercial-grade IC-F1000T series of radios. These direct conversion wideband VHF/UHF portable handhelds provide a stable 5 Watts RF output on the 2 meter and 70cm bands and they are FM broadcast receive capable; 88-108 MHz. The IC-T10 features include 200 channel memory, Priority Scan, Internal VOX and CTCSS / DTCS /DTMF Encoding, and high output audio, among many others, that will place this Icom HT at the top of the list!

4.17 out of 5 stars ( 29 )

$239.95

$169.00

On Sale

ICOM IC-V86 VHF FM Portable Handheld Transceivers

ICOM IC-V86 VHF FM Portable Handheld Transceivers give you more audio, more RF power, more coverage and more battery capacity in a compact, MIL-STD portable 2 meter HT. Producing 1500 mW of audio power to an improved chassis design and speaker, the IC-V86 lets you easily hear incoming signals in loud, noisy environments. The IC-V86 transmit coverage is expanded with 7W of RF output power and the new 2250mAh Li-Ion battery pack also provides longer operational capabilities. Useful features, functions and specs and of the ultra-rugged ICOM IC-V86 FM 2 meter HT: - Frequency Range - TX: 144-148 MHz, RX: 136-174 MHz - Output power - 7.0/5.5/2.5/0.5 W (EX Hi/Hi/Mid/Low) - Type of emissions - F2D, F3E (FM, FM-N) - Durable BNC female antenna connector - 200 memory channels, 6 scan edge channels and 1 call channel - Maximum Frequency Deviation: ±5.0 kHz/±2.5 kHz (FM Wide/ FM Narrow) - Selectable Volume Level, VFO/Memory Channel Selection Control - Integrated VOX function - Built-in CTCSS and DTCS Encode Decode and Tone Scan - IP54 Waterproof rating - IP67 Rating for dust-tight and waterproof protection - MIL-STD-810 -C,-D, -E and –F; passed environmental tests for pressure, temperature, sun, rain, humidity, salt fog, dust, vibration and shock - Dimensions (WHD) 2.3 × 4.4 × 1.2 in (58.6 × 112 × 30.5 mm) with supplied BP-298 battery pack - Made in Japan - Quality and Reliability Supplied Accessories (May differ, depending on transceiver version): - BP-298 Battery Pack - BC-240, Desktop Charger - BC-242, AC Charger Adapter - MB-124 Belt Clip - Antenna, BNC Rubber Whip

4.55 out of 5 stars ( 33 )

$139.95

$129.95