Availability
Parts and Accessories
Optima YellowTop Deep-Cycle 12-Volt Batteries
Optima YellowTop deep cycle 12 V batteries can help power your passion for Amateur Radio! Every ham operator needs a plan for emergency power. Optima YellowTop AGM batteries can be quickly recharged, operate over a broad temperature range, and their ability to recover from the deepest discharge approaches that of wet NiCds, but with less maintenance and a lower life cycle cost. Plus, Optima’s Spiralcell technology and sealed construction make them a good fit for auxiliary power sources for emergency communications, because they’re safe for indoor use with your sensitive radio equipment. They offer two times longer life and 15 times the vibration resistance of standard lead-acid batteries, plus they are spill-proof and powerful. What’s your plan for backup power? For an effective emergency power system, be sure to include Optima YellowTop deep cycle 12 V batteries.
( 1 )
$319.99
—
$419.99
RigExpert MATCH Upgradeable Antenna and Cable Analyzers
RigExpert MATCH Upgradeable Antenna and Cable Analyzers are designed to revolutionize the way you analyze and fine-tune antennas and cables. Featuring innovative technology, these analyzers offer the flexibility to upgrade as your needs evolve, ensuring they remain a valuable tool for both current and future projects.
( 19 )
$299.99
DX Engineering Complete Fiberglass Tubing and Cam Lock Clamp Kits
DX Engineering Complete Fiberglass Tubing and Cam Lock Clamp Kits bring together high quality and innovation for the Amateur Radio antenna experimenter and portable operator. Here are the latest telescopic tubing and clamp kits, offered in four sizes to satisfy the needs of almost any ham for temporary and portable antenna support, with speed and convenience in mind. Now, with shorter fiberglass tubing, transporting is much easier and shipping costs are reasonable once again! These Complete Kits include the all new DX Engineering Telescoping Fiberglass Tubing. They are made from high quality, pultruded fiberglass tubing with a nominal 0.120 in. wall thickness and a smooth finish for long term use. The two shorter sets have 48 in. sections; the four piece set can extend to 15 ft., and the seven piece set can telescope to 25 ft. The two sets that can extend to 46 ft. tall consist of seven 90 in. sections. The standard set starts with a 2 in. OD base and the Heavy Duty 46 ft. model features a massive 3 in. OD bottom section. DX Engineering Cam Lock Clamp Kits provide fast and easy operation of these portable telescopic fiberglass masts. Multiple clamps are included with each kit, and are the type that permanently mount on the lower tube and allow fast telescopic mast extension and collapsing using the integral Cam Lock Lever that secures the smaller inside tube. Each Cam Lock Clamp kit includes a 3mm Allen wrench that fits all three cap screws, two for the lower tube mounting clamp and one on the upper lever adjustment. Once properly adjusted, the closed lever of the Cam Lock Clamp will hold the upper tube in place very securely. A vinyl cap is included to cover the top of the smallest fiberglass tube being clamped. See all of the included clamps and tubing sizes in the chart, at each kit's images and at the "More Detail" link. Rope for the required guying of telescopic fiberglass masts is sold separately. DX Engineering Complete Fiberglass Tubing and Cam Lock Clamp Kits are the all-new 4 ft. and 7.5 ft. sets of sturdy tubing and easy-to-use clamps for your antenna project, and they ship at low cost! Order yours today!
( 149 )
$281.98
Yaesu G-450ADC Medium-Duty Rotator Systems
Yaesu G-450ADC Medium-Duty Rotator Systems are the entry-level rotator and controller that are perfect for small HF beams, a tri-bander or VHF and UHF antennas up to about 10 sq. ft. of tower-mounted wind load. A lesser wind load of about 5 sq. ft. can be handled when mounting the G-450ADC on top of a mast with the optional lower mast bracket, GC-038. Rotate Amateur and professional antennas with the Yaesu's handsome 120 Vac desktop remote control console, featuring a compass-style indicator at the station operating position. The G-450ADC rotator system provides 450 degrees of azimuth rotation in just over one minute. The rotator handles masts of 1.25 to 2.48 in. outside diameter and, when tower mounted, a total vertical mast load up to 200 lbs. In the Yaesu G-450ADC, the clamshell rotator design utilizes 98 heavy 7/16-inch dual-stacked circumferential ball bearings to distribute load over the full diameter of the housing. This design minimizes stress and wear, and practically eliminates the possibility of destructive water entry: there is no shaft hole in the top of the housing. Yaesu's factory-lubricated rotator units are housed in Melamine resin-coated die-cast aluminum intended to provide maintenance-free operation under all climatic conditions. IMPORTANT NOTE: Beginning in 2019 the new Yaesu G-450ADC Rotator motors and controllers operate with a 20 V DC control voltage, four-wire system, using the provided connectors to be installed at each end of the user supplied control cable, same as the previous models. For clarity, the new DC rotator motors are marked "G-450DC" at the connector. The rear panel of the controller is titled "G-450ADC" on the serial number label. WARNING: The legacy Yaesu G-450A Rotator motors and controllers used a 26 VAC control voltage, five-wire system. Therefore, old AC controllers are NOT compatible with new DC rotator motors, and new DC controllers are not compatible with old AC rotator motors. All control cable assemblies for all modern Yaesu rotator systems use the same connectors with "1 to 1 pin-out" connector wiring. Therefore, older cable assemblies are compatible with the new Yaesu G-450ADC components, which only use pins 2, 3, 4 and 5 in each connector. For control cable runs less than 125 ft. use four-conductor, 20 gauge control cable (4 x 20 AWG). If the rotator cable needs to be longer than 125 ft., then use four-conductor 18 gauge cable (4 x 18 AWG). The input voltage for the G-450ADC controller is labeled "117 VAC" to indicate house current of 110 to 120 Vac. When you need a medium-duty rotator system, which is durable and attractive, order a new Yaesu G-450ADC Medium-Duty Rotator System from DX Engineering.
( 45 )
$429.99
On Sale
RigExpert Antenna Analyzers
RigExpert Antenna Analyzers are powerful antenna analyzers designed for testing, checking, tuning, or repairing antennas and antenna feed-lines. Mainly, these are SWR (Standing Wave Ratio) and impedance measurement instruments (vector impedance analyzers). Their large, bright LCD screens provide graphic illustration of SWR, impedance; return loss, and much more. Easy to use measurement modes, as well as additional features such as connection to a personal computer (to plot SWR, R, X and Smith charts, etc.); make RigExpert Analyzers attractive for professionals and hobbyists alike. They are compatible with several operating systems, including Windows© 10, 11 and Mac, with software download*. The graphic display of various parameters over a wide frequency range is a key feature of these analyzers. This significantly reduces the time required to adjust an antenna. ZOOM models allow you to zoom-in on graph points for clearer analysis. USB connection allows export of sweep files with Antscope for Android or Antscope2 software to PC or MAC. *(download from the manufacturer https://rigexpert.com/products/software/). Many models have Bluetooth for direct file transfer for galvanic isolation without a USB cable, which provides the most accurate measurements. RigExpert Antenna Analyzers are available in several models with greater frequency range of operational features. Some have SO-239 UHF female connector, except for most models that operate at 230 MHz and above that have a Type N female connector. An array of options are available to cover almost any need for the professional and the Amateur. The following tasks are easily accomplished by using RigExpert Antenna Analyzers: * Rapid check-out of an antenna * Tuning an antenna to resonance * Antenna SWR and impedance measurement and comparison before and after a specific event (rain, hurricane, winter, etc.) * Making coaxial lines or measuring their parameters * Cable testing and fault location * Measuring capacitance or inductance of reactive loads *Send data to laptop for larger graphical display and further analysis. Note: For additional product information, please look at the files under the "Documentation" tab. When you need a versatile antenna analyzer for Amateur Radio or professional use, you'll find that one of these RigExpert Antenna Analyzers, from DX Engineering, will be well suited to the task!
( 513 )
$534.95
$319.99
—
$489.95
ICOM IC-2730A VHF/UHF FM Transceivers
ICOM IC-2730A VHF/UHF FM Transceivers provide VHF/VHF, UHF/UHF simultaneous receive capability in addition to VHF/UHF receive. These transceivers have a built-in duplexer, so you can use a 144 and 430 MHz dual-band antenna without needing an external duplexer. Main dials, volume, squelch knobs and primary control buttons are symmetrically laid out for each band. IC-2730A transceivers employ a durable PA module and deliver 50 watts of high power analog operation on the 2-meter and 70cm bands. CTCSS and DTCS tones are built-in for quiet stand-by and repeater access. CTCSS split tone function allows you to set CTCSS tones separately for repeater uplink and downlink. A single DTCS code may be polarity reversed independently for repeater uplink or downlink. IC-2730A receivers cover 118-174 and 375-550MHz. You will be able to listen to aviation, marine, weather channels and other utility communications. The display size of ICOM's IC-2730A is 1.5 times larger than ICOM's other comparable models. Frequency display and channel names are larger, and the white backlight provides higher contrast. Here are more ICOM IC-2730A features: * Cross band repeater capability * CS-2730 Free PC programming software downloads * Versatile scanning capability * Squelch delay and squelch attenuator * Sub band auto mute function * Auto repeater function * Auto power off * TX time-out-timer * 16 DTMF auto dial memories * Weather channel receive with weather alert (USA version only) * CI-V remote control capability (through the optional OPC-478UC) Note: For additional information, please look at the files under the "Documentation" tab. Supplied accessories include: * HM-207 remote control microphone * Controller cable, OPC-837 * Microphone hanger * DC power cable, OPC-1132 * Spare fuse NOTE: Optional MBA-4 bracket mounts the Control Head to the main unit. These new dual-band FM transceivers have advanced features at a very affordable price. Purchase ICOM IC-2730A VHF/UHF FM Transceivers from DX Engineering for the best in quality and customer service!
( 143 )
$339.95
Instant Rebate
Yaesu ATAS-120A Auto Active Tuning Antennas
Yaesu's patented ATAS™ Active Tuning Antenna System has been enhanced with the latest model: ATAS-120A. This is a unique mobile antenna that provides HF, VHF and UHF coverage with automatic motorized tuning. Designed for use exclusively with Yaesu transceivers that support ATAS, microprocessor controlled voltages are sent on the coaxial cable to adjust the antenna radiator length for best SWR. Yaesu ATAS-120A active tuning antennas cover the 7, 14, 21, 28, 50, 144 and 430 MHz Amateur bands and are compatible with the Yaesu FTX-1, FT891, FTDX-10, FT-710, FT-991A, FT-991, FT-857D, FT-897D, FT-100, FT-100D and the FT-450D. They are typically attached to a vehicle hatch or trunk lip UHF mount (not supplied), also available from DX Engineering. The ATAS-120A antennas were designed for mobile use, however they can be adapted for base, or portable operation with the appropriate mount and a substantial counterpoise radial wire system. Specifications of the Yaesu ATAS-120A Auto Active Tuning Antennas: * Operational Bands: 40, 20, 15, 10, 6 and 2 meters and 70 cm * Height, appx.: 4.59 to 5.25 ft. * Weight, appx.: 1.98 lbs. * Input Impedance: 50 ohms * Maximum Power: 120 Watts, SSB, CW, 50 percent duty cycle * Matched SWR: Less than 2.0:1 with proper grounding or counterpoise As with any HF, VHF and UHF mobile antenna, performance depends upon the grounding of the mount and bonding to the metal vehicle surfaces to create an optimal ground plane. Portable VHF and UHF operation is made possible with the addition of the optional Yaesu ATBK-100 Antenna Base Kit. This kit is not required, nor should it be used, for mobile operation. Operational convenience and performance is available for your Yaesu HF, VHF and UHF Mobile Transceiver. Order Yaesu ATAS-120A Active Tuning Antennas from DX Engineering.
( 49 )
$349.99
Chelegance MC-750 Portable HF Vertical Antennas
Chelegance MC-750 Portable HF Vertical Antennas feature a quick, no tools required antenna system that is easy to set up and disassemble covers 40 through 6 meters and will handle up to 100 watts. The antenna base with a built-in ground spike has a female SO-239 connector and jacks for up to 4 preassembled, 11.48 ft. counterpoise radials. The MC-750 functions as a quarter-wave vertical ground plane antenna for the 14 - 50 MHz frequency range while using the included 17 ft. telescoping whip. Install the supplied loading coil for operating in the 7 MHz/40M band. This vertical antenna kit comes packed in a handy carrying bag to keep things organized. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Additional Features and Specifications: * Antenna Base with Ground Spike * 7 Mhz Loading Coil * 1.64 ft. Extension * 17 ft. Telescopic Whip * 4 – 11.48 ft. Wire Radials * Cable Winder * Carrying Bag
( 48 )
$327.99
DX Engineering LMR400UF Ultra-Flex Coaxial Cable Assemblies
DX Engineering LMR400UF UltraFlex Coaxial Cable Assemblies handle twice the power at half the loss with the same bending capabilities of smaller diameter coaxial cables. UltraFlex Cable Assemblies are perfect for interconnecting high and low power HF and VHF equipment. Times Microwave LMR® 400UF UltraFlex cable has a stranded bare copper center, foam polyethylene dielectric and a pliable rubber jacket (black thermoplastic elastomer) designed for bending. DX Engineering LMR400UF UltraFlex DX Series PL-259 Coaxial Cable Assemblies are terminated at each end with our custom-designed, silver-plated brass DX Engineering PL-259 (UHF male) connectors. These next generation PL-259 connectors feature: -Full diameter, full length soldered center pins that snugly fit even worn SO-239s -Spacious center pin inside diameter that accepts large conductors and allows generous solder flow -Deep, double knurled threaded shells for secure finger tightening These high quality PL-259s have all silver-plated brass shells and bodies with center pins securely mounted in PTFE dielectric for exceptional RF characteristics and power handling. Our DX Series cable assembly PL-259 center pins are hand soldered by trained assembly techs to assure a proper connection. These special PL-259 cable assemblies also feature machine crimped shields, with 360 degrees of complete mechanical and electrical contact for maximum reliability. Every assembly is continuity checked and evaluated with extremely high voltage, then heat-shrink weather-sealed for ultimate longevity. You will not find this level of cable assembly quality anywhere else! Terminated with DX Engineering Next Generation PL-259 connectors, these cable assemblies are intended for use to 170 MHz. An exceptionally flexible, low-loss coaxial jumper for high power Amateur or commercial HF or VHF use – order DX Engineering LMR400UF UltraFlex Coaxial Cable Assemblies.
( 30 )
$289.99
ICOM IC-2730B Black Edition VHF/UHF FM Transceivers
ICOM IC-2730B Black Edition VHF/UHF FM Transceivers boast all the same great features as the original IC-2730A transceiver, but with a new high contrast black inverted LCD display that offers improved visibility in various lighting conditions, reduced glare, and lower energy consumption. The display size of ICOM's IC-2730B is 1.5 times larger than ICOM's other comparable models, giving way for larger frequency display and channel names. These VHF/UHF FM Transceivers provide VHF/VHF, UHF/UHF simultaneous receive capability in addition to VHF/UHF receive. These transceivers have a built-in duplexer, so you can use a 144 and 430MHz dual-band antenna without needing an external duplexer. Main dials, volume, squelch knobs and primary control buttons are symmetrically laid out for each band. IC-2730B transceivers employ a durable PA module and deliver 50W of high power analog operation on the 2-meter and 70cm bands. CTCSS and DTCS tones are built-in for quiet stand-by and repeater access. CTCSS split tone function allows you to set CTCSS tones separately for repeater uplink and downlink. A single DTCS code may be polarity reversed independently for repeater uplink or downlink. IC-2730B receivers cover 118-174 and 375-550MHz. You will be able to listen to aviation, marine, weather channels and other utility communications. These IC-2730B transceivers come equipped with an HM-207 Remote Control Hand Mic. An optional VS-3 Bluetooth Headset is available and requires a UT-133/A Bluetooth module to be installed into the IC-2730B. The Bluetooth headset and module are sold separately.
( 19 )
$369.95
Astron Power Supplies
When you are in need of reliable DC power supply, look no further than Astron Power Supplies. This line of linear DC power supplies are made of heavy-duty, high-quality materials. Astron has your power requirements covered with a wide variety of voltage and amperage outputs and case styles with and without meters. Even their power supplies with only cigarette lighter sockets or with Anderson Powerpoles on the front panel still have DC output terminals on the rear panel. That's convenient! Astron linear-type transformer power supply features include: * Solid state electronically regulated * Fold-back current limiting protects power supply from excessive current and continuous shorted output * Crowbar over voltage protection on all models except RS-3L, RS-4L and RS-5L * Tight regulation and low ripple at low line input voltage * Heavy-duty heat sink (70A models add a low noise fan) * Three conductor power cord * All metered units feature backlit meters At DX Engineering, we bring you only the best - Astron Power Supplies do not disappoint! Performance specifications: * Input Voltage: Most models are built for 105 to 125 VAC input. Some "220" models are built for 210-250 VAC input. * Output Voltage: As Listed * Ripple less than 5 mv peak to peak (full load and low line) At DX Engineering, we bring you only the best - Astron Linear Power Supplies do not disappoint! For reliability and convenience, look to Astron Power Supplies from DX Engineering.
( 126 )
$250.95
—
$419.95
Comet CHA-250HD HF/VHF Vertical Antennas
Comet CHA-250HD HF/VHF Vertical Antennas is an updated design of the popular CHA-250B vertical antennas. These antennas make the most of a tight situation! - Please CLICK on the title of the product(s) listed for the Overview, Specifications, a complete Description and Suggested Parts. Links to instruction manuals also appear in the Documentation section.
( 41 )
$499.95
Anytone AT-D890UV Dual Band VHF/UHF/DMR Handheld Transceivers
Anytone AT-D890UV Dual-Band VHF/UHF/DMR Handheld Transceivers feature built-in Bluetooth, GPS, and APRS capability. They include Air Band AM receive, cross-band repeater mode, and analog scrambler/compander functions. A vibrant 1.77-inch color TFT display provides easy access to 4,000 channels and up to 500,000 digital contacts with AES-256 encryption. These transceivers are powered by a 3100mAh battery with convenient USB-C charging and upgraded 2G memory capacity.
( 1 )
$299.99
Chelegance KC4 4-Band HF Vertical Base Antennas
Chelegance KC4 4-Band HF Vertical Base Antennas are versatile and powerful 4-band HF vertical antennas designed for base station use covering the 40m, 20m, 15m, and 10 meter bands and provide the operator seamless multi-band operation with automatic band switching. With its power handling capacity of up to 1000W PEP (500W CW and 300W Digital modes), the KC4 ensures reliable performance across various modes, including SSB, CW, RTTY and other digital modes. Its top-loading design enhances efficiency, while the self-supporting vertical radiator eliminates the need for ground radials, simplifying installation. The antenna stands at 25.60 ft. tall and is built to withstand harsh weather conditions, making it a reliable choice for both casual and serious operators. Final tuning and trimming is necessary to achieve the lowest SWR.
( 5 )
$458.99
Alpha Antenna HF/VHF/UHF MagLoop EmComm Antennas
Alpha Antenna HF/VHF/UHF MagLoop EmComm Antennas are designed in an oval shape to maximize signal transmission skyward. These versatile antennas include a low-loss BNC coaxial feedline connector and built-in, removable tripod legs, making it ideal for various deployments such as balconies, desktops, parks (POTA), summits (SOTA), and similar operating locations.
( 7 )
$399.00
CSN Technologies S.A.T. - Self Contained Antenna Trackers
CSN Technologies S.A.T. - Self Contained Antenna Trackers predict and track satellite passes while simultaneously controlling an antenna rotator and tuning a transceiver. - Please CLICK or TAP on the title of a listed item for an overview - a complete description, Specifications, Required and Suggested Parts. Links to instruction manuals and charts appear in Documentation.
( 39 )
$275.00
ROHN 25G Tower Sections
ROHN 25G Tower Sections are the world standard in galvanized steel tower. ROHN towers use double-bolted joints, which have been proven to be the best method of joining tower sections, for sturdiness and dependability. As a guyed structure, the standard 25G designs may rise to a height of 190 ft. ROHN 25G Tower Sections include the standard straight sections that are 10 ft. in length. Also, special short sections are available in various lengths to suit your tower base or shipment needs. 25G Tower Sections are offered in several different top section configurations to accommodate various mast sizes and antenna mounting or rotating requirements. ROHN 25G Tower Sections feature: * Complete hot dip-galvanizing after fabrication * 11 1/4 in. equilateral triangle design * High-strength tubular legs are joined by continuous, solid round steel bracing cross members * Each straight and top section shipped with all required nuts and bolts for mounting that section, supplied inside one of the section legs. ROHN 25G Tower Sections are available directly from DX Engineering at competitive shipping rates. The more you order, the better the deal! Order your ROHN Tower Sections and other tower installation accessories from DX Engineering today!
( 21 )
$324.99
—
$359.99
Instant Rebate
Yaesu FC-50 External Antenna Tuners
Yaesu FC-50 External Antenna Tuners are specifically designed for use with Yaesu's FT-891 HF/50 MHz transceivers. These microprocessor-controlled antenna tuners are capable of automatically matching up to 200 memories. They may be easily coupled with an FT-891. FC-50 tuners include all necessary FT-891 interconnect cables for operation right out of the box! Match coaxial-fed antennas from 1.8 to 50 MHz with ease and keep your FT-891 humming happily along. Note: For additional information, please look at the files under the "Documentation" tab. Order Yaesu FC-50 External Antenna Tuners from DX Engineering!
( 19 )
$319.99
DX Engineering Coaxial Cable Prep Tools for Crimp Connectors
DX Engineering Coaxial Cable Prep Tools for Crimp Connectors are an easy way to prepare cable ends for RF crimp connectors. These are the tools to use for dual shield cables that require crimp connectors, as well as on single shield cables when you want to use crimp connectors. - Please CLICK or TAP on the title of a listed item for an overview - a complete description, Specifications, Required and Suggested Parts. Links to instruction manuals and charts appear in Documentation.
( 175 )
$319.99
LDG Electronics AT-200ProII Automatic Antenna Tuners
There was a time when 100 watts was a lot of power. Today, more and more transceivers feature 200 watts of output. Even though many of these modern radios feature a built-in tuner, the tuners' range and features are usually quite limited. Break through those barriers with LDG Electronics AT-200ProII Automatic Antenna Tuners! They're designed for this new generation of rigs and are specifically recommended for Ten-Tec and tube radios. Many QRP operators have a small 100-150 watt amplifier for times when you need a few more S-units. The AT-200ProII tuners are ideal for this kind of operation; their minimum required power is only 5 watts, but they will handle higher power as well. The AT-200ProII tuners will handle up to 250 watts SSB or CW (75 watts RTTY, FT8) on 1.8-30 MHz, and 100 watts on 54 MHz. They feature LDG's state-of-the-art, processor-controlled Switched-L tuner. The AT-200ProII tuners will match virtually any kind of coax-fed antenna, including Yagis, dipoles, inverted Vs, slopers, loops, or just about anything. They will typically match a 10:1 SWR down to 1.5:1 in just a few seconds. You can also use the AT-200ProIIs with end-fed antennas, random wires, and antennas fed with ladder line with the optional LDG balun. Operation couldn't be simpler--while transmitting a carrier, just press the tune button. An automatic tuning cycle will begin and then end a few seconds later with the tuners set at the lowest SWR (almost instant for frequencies stored in memory). The AT-200ProII automatic memory tuners are the latest in a long line of innovative LDG Electronics tuners and will allow you to get the most out of your Kenwood, Yaesu, Ten-Tec, or ICOM radio that operates at higher power. Additional features include: * 5 to 250 watts SSB and CW (100 watts on 6M, 75 watts HF Digital, RTTY, PSK, FT8) * Easy-to-read LED bar graph display for RF power, SWR, and status * LEDs for antenna position and bypass * 4,000 memories (2,000 for each antenna) for instantaneous band changing * 2-position antenna switch with memories for four antennas on each position * Tuning time: 0.5 to 6 seconds full tune, less than 0.1 second memory tune * Built-in frequency counter for memory operation * Tunes 6 to 800 ohm loads (16 to 150 ohms on 6m), 6 to 3,600 ohms with optional 4:1 balun * Includes 6 ft. DC power cable * Power requirements: 11 to 16V DC at 750 mA max during tuning * Weighs 2 lbs. Note: For additional information, please look at the files under the "Documentation" tab. If you are running an older, high-output tube rig, a newer 200 watt rig, or have a small amplifier to give your QRP rig a boost, consider LDG Electronics AT-200ProII Automatic Antenna Tuners from DX Engineering!
( 36 )
$319.99
Optima BlueTop Deep Cycle Marine 12-Volt Batteries
Optima BlueTop marine deep cycle 12 V batteries can extend your mobile radio operation to the “field”! Deep-cycle batteries in general are better for communications as they can withstand long periods of slow discharge, as well as being a source for long-lasting portable power. Optima BlueTops offer 55 amp-hour or 75 amp-hour versions depending on model chosen. They’re completely spill-proof, sealed units that may be used indoors safely. They are mountable in most any position and have more than 15 times the vibration resistance of regular lead-acid batteries, which is crucial for your off-road and marine applications. Along with their Spiralcell technology, these AGM batteries operate over a broader temperature range and they weigh less than standard batteries. Additionally, these top-of-the-line battery models are perfectly suited to portable, mobile, marine or emergency preparedness radio operations, anywhere! Why? Because Optima BlueTops offer you 3 times more recharges than standard lead-acid batteries. Get on the move; take your radio from your vehicle to your boat to the great outdoors with the power of Optima BlueTop marine deep cycle 12 V batteries.
( 1 )
$339.99
—
$399.99
DX Engineering Premium Radial Wire
DX Engineering Premium Radial Wire will help you to achieve optimal performance with a ground-mounted vertical and install as many radials as possible. These PVC-insulated stranded copper radial wires are UV-resistant and roll out easily, unlike the wire that is commonly available at "big-box" stores. DX Engineering Premium Radial Wire will last much longer when exposed to the elements, as compared to bare wire.
( 26 )
$334.99
DX Engineering TB300 Advanced Design Thrust Bearings
DX Engineering TB300 Advanced Design Thrust Bearings offer a major advance in mechanics that solve the issues with competing tower mast bearings that wear out too quickly They are specifically designed for a vertically mounted 1.5 to 2.0 inch OD tower mast installed for the efficient rotation of directional HF, VHF, UHF and SHF antennas. Introduced in early 2021, the upgraded DX Engineering TB300 features high quality stainless steel ball bearings and stainless steel races that keep the bearings very clean. Compared with ANY OTHER thrust bearings, our TB300 thrust bearings are firm and strong with an ultra-low rotation resistance that has to be seen to be believed. These heavy-duty bearing assemblies are cast from high-strength zinc-aluminum alloy, precision machined and assembled to last for the life of the tower installation. DX Engineering Thrust Bearings are 7 in. diameter overall and mate with tower bearing plates and accessory plates for ROHN or Amerite towers. DX Engineering TB300 thrust bearings mount directly to: -DXE-AS455G DX Engineering Accessory Shelf for inside of ROHN 45G and 55G and Amerite 45 & 55 -Pre-drilled "Flat-Top" Tower Section models ROHN 25AG4 ROHN 45AG4 -Top Bearing Plate models ROHN BPL25G on top of a straight 25G tower section ROHN BPL45G on top of a straight 45G tower section ROHN BPL55G on top of a straight 55G tower section -Tower Top Bearing Plate with Accessory Shelf ROHN BAS25G for top of a straight 25G Tower Sections (may be used on the top of combination model). They may also be used on any Amerite Tower and accessory that corresponds to the ROHN part numbers listed above, including tower-top bearing shelves for AME-25, 45 and 55 series towers. NOTE: Accessory Shelf models that fit inside of ROHN or Amerite 25G do not accommodate DX Engineering Thrust Bearings. These bearings are intended only for top mount on flat top 25G tower. The DXE-TB300 Thrust Bearing, for up to 2 in. OD mast, is supplied complete with hardware. The three stainless steel mast capturing and centering hex head bolts are 3/8-16 x 1-1/2 in. long with stainless steel hex nuts. The mounting hardware, four (4) structural mounting bolts are 1/2-13 x 1-1/4 inch long, and the mounting hex nuts and washers are all galvanized. The TB300 accommodates a mast size range of 1.500 to 2.000 in. OD. Designed and built for vastly improved longevity, our thrust bearings reduce the load on your rotator motor more efficiently than the old standard version. Order DX Engineering TB300 Advanced Design Thrust Bearings for your tower project with 2 inch OD mast.
( 20 )
$265.99
Yaesu VX-6R 2m/220/70cm FM Heavy-Duty Tri-Band Ultra-Compact FM HTs
Yaesu VX-6R 2m/220/70cm FM Heavy-Duty Tri-Band Ultra-Compact FM HTs are ideal for rigorous field use! With wide-band reception, rugged and submersible design and simple keyboard commands, these Yaesu VX-6R Transceivers are loaded with features. As a bonus, these USA-version radios transmit on 222-225 MHz with 1.5 watts output!
( 60 )
$299.99