Availability
DX Engineering Antennas
DX Engineering RF-PRO-1B® Active Magnetic Loop Antennas
New Name...Same Antenna! DX Engineering RF-PRO-1B® Active Magnetic Loop Antennas are designed for low-noise reception of signals within the frequency range of 100-kHz to 30-MHz. Their integral, extra-high dynamic range, low-noise preamplifier is designed for minimum intermodulation distortion in the presence of very high-level signals that would normally overload most preamplifiers. Read more about the exclusive Clifton Laboratories design of the loop's RF-30 preamplifier by clicking "More Details" below. RF-PRO-1B Active Magnetic Loop Antennas, formerly known as the "Pixel Loop" and recently as InLogis, are now manufactured and serviced by DX Engineering. For Amateur Radio operators, AM DXers and Short-Wave Listeners, these active loop antennas are a great way to extend your listening ability. Add DX Engineering RF-PRO-1B® Active Magnetic Loop Antennas to your radios and start hearing more signals with less noise! Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 26 )
$809.99
DX Engineering Maxi-Core® 20 Baluns and Feedline Chokes
The present-day DX Engineering was launched in the year 2000. To celebrate our 20th Anniversary in the year 2020 we have developed a new line of Baluns and Feedline Chokes. Introducing DX Engineering "Maxi-Core® 20" Baluns and Feedline Chokes. They reduce or eliminate currents on the outside of your feedline allowing you to hear and to be heard much better. They keep more RFI/BCI out of your antenna and receiver and transfer more of your transmitted signal to the antenna for higher efficiency, the best antenna pattern and maximum performance. Signaling a new era of RF performance across the 1.8 to 54 MHz frequency range, DX Engineering Maxi-Core® 20 Baluns and Feedline Chokes handle full-legal-power-plus and provide higher common mode impedance (CMI) across a greater frequency range than competing models and even previous DX Engineering and Comtek models. Years of R&D coupled with major advancements in test equipment and techniques combined with custom ferrite materials have allowed our engineering team to design the DX Engineering Maxi-Core® 20 Baluns and Feedline Chokes. Maxi-Core® 20 Baluns and Chokes have high CMI across the AM Broadcast band and the HF/6M spectrum, which is essential to provide sufficient suppression of unwanted transmitted and received RFI/BCI current on the feedline shield exterior. Hear and be heard with DXE Maxi-Core® 20 Baluns and Feedline Chokes. Choose superior performance from these models: * DXE-MC20-1-1 Maxi-Core® 20 - 1:1 Current Choke Balun - For all HF-6m balanced antennas with a 50 ohm feedpoint, including resonant dipoles, loops, Yagis, beams, etc. * DXE-MC20-FC Maxi-Core® 20 - 1:1 Feedline Choke – This high CMI line isolator is perfect for use in line on 50 ohm coaxial feedlines, at the antenna, tower or shack end of the feedline. * DXE-MC20-1-1T Maxi-Core® 20 - 1:1 Current Choke Balun – This 1:1 "T" model is for force feeding antennas with a tuner. Use it at the end of ladder line of any impedance or mounted on a coax fed non-resonant antenna. This model tolerates operation at high SWR on non-resonant multi-band antennas. * DXE-MC20-C4-1 Maxi-Core® 20 - 4:1 Current Choke Balun is for use on antennas with a 200 ohm feedpoint and at the end of any impedance ladder line, especially on antenna systems with higher impedance. This model tolerates operation at high SWR on non-resonant multi-band antennas. * DXE-MC20-V4-1 Maxi-Core® 20 - 4:1 Voltage Balun is a 200 ohm to 50 ohm transformer for use on random long-wire and OCF antenna applications. This true voltage balun is intentionally designed with low CMI for antennas that need a transformer without RF choking for easier antenna tuner operation and it tolerates elevated SWR. Maxi-Core® 20 Baluns and Feedline Chokes are built into a convenient weather resistant NEMA enclosure that is mounted easily with optional brackets. They feature 1/4-20 stainless steel hardware and a high quality silver-plated PTFE dielectric SO-239 (UHF female) input connector. The SO-239 connector limits power handling to 5 kW at low SWR and reduced power at elevated SWR. These baluns and the feedline choke exhibit very low insertion loss and inherently low SWR. Optional mounting brackets are available for use on wire antennas or for verticals, Yagi and beam antennas. See the Suggested Parts tab after clicking "More Detail" on the model of interest. Combination packages that include balun or choke and mounting bracket are also available.
( 141 )
$141.99
—
$169.99
DX Engineering Stainless Steel Telescopic Whips
DX Engineering Stainless Steel Telescopic Whips combine rugged durability, corrosion-resistant stainless-steel construction, and a compact collapsible design. Engineered for portable HF operation, these versatile whips are ideal for POTA, SOTA, DXpeditions, EMCOMM, and other field deployments, delivering reliable performance wherever your operating adventures take you.
( 2 )
$59.99
—
$79.99
DX Engineering Radial Plates
DX Engineering Radial Plates are made of 304 Stainless Steel, 1/8 inch thick and 11.625 in. x 11.625 in. outside dimensions. They are made with the finest Stainless Steel that will last! Not cheap aluminum that will dissolve in your soil! ".....it is so beautiful, I want to frame it and put it up on the wall - not in the dirt under my vertical. Sebastian - NS0W" Unique enough to be covered by two US Patents, (Pat. No. 6,927,740 and D533,167), the DX Engineering Radial Plate is meant for those of you that have or are building a quarter wave vertical antenna and who want an easy, neat and effective way to connect those essential radial wires and the coax to your vertical antenna for the lowest takeoff angle and strongest signals. Stainless steel construction assures that your signal won't disappear like a disintegrating aluminum radial plate. One OPTIONAL SADDLE CLAMP (SOLD SEPARATELY) IS REQUIRED to mount the DX Engineering Radial Plate to a ground mounted antenna support pipe, also sold separately. For STEEL pipe from 1 to 2 in. O.D. the all-Stainless Steel DXE-SSVC-2P is the REQUIRED clamp, sold separately. For STEEL pipe from 2 to 3 in. O.D. the all-Stainless Steel DXE-SSVC-3P is the REQUIRED clamp, sold separately. For pipe or rod whose O.D. is between 0.50 in. and 1.75 in. the DXE-CAVS-11P V-saddle clamp is the REQUIRED clamp, sold separately. For aluminum tubing from 1 in.to 2 in. O.D., the DXE-CAVS-2P V-saddle clamp is the REQUIRED clamp, sold separately. This plate will work perfectly with most commercially available vertical antennas such as the Hustler BTV series (4BTV thru the 6BTV), the SteppIR (BiggIR or SmallIR) or an antenna of your own construction. When used with the Hy-Gain AV-18HT Hy-Tower antenna, the radial plate will sit on the concrete under the base plate and will fit within the three concrete-mounted base/insulator pipes. The DX Engineering Radial Plate has a number of advantages over the other plates on the market: First, the DX Engineering Radial Plate will attach easily and rigidly to a 4x4 or 6x6 wooden post using simple wood screws, or to a steel or aluminum pipe (up to 3.0 in. outside diameter) using an OPTIONAL SADDLE CLAMP, SOLD SEPARATELY, to attach to whatever you have supporting your vertical. Size and clamp selection is detailed above. Second, this plate actually has a place where you can attach your coax! What a concept! The plate assembly has been drilled for optional SO-239 Chassis Mount and Bulkhead Fittings. This is a MUST item for proper handling of RF ground current! Regardless of how you do it, it is imperative that your coax be grounded to the radials to complete the circuit for your radial current. Third, the DX Engineering Radial Plate is laser cut from tough stainless steel so that it has smooth edges, won't corrode and will always look good. You will be proud of how good your installation looks. Fourth, it is square. Why? Because a square has more lineal distance around it than the round plates that you usually see. This allowed us to put 60 holes in it, use larger bolts for more clamping power and still not crowd them together. Remember: The more current that flows in through your radials and through this plate, the stronger your signal is going to be and the more DX stations that you are going to hear. So, put on as many radials as you can. Fifth, we supply the correct Stainless Steel bolts, nuts, star washers, flat washers and lock washers to attach the radials. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. For the absolutely finest made radial plate available, order DX Engineering Radial Plates. Suggested as a station upgrade product - make more contacts to worldwide DX stations and DXpeditions
( 82 )
$99.99
DX Engineering RT4500HD Heavy-Duty Rotators
DX Engineering RT4500HD Heavy-Duty Rotator – The ultimate azimuth positioning rotator, purpose-built to work flawlessly for many years in a majority of tower mounted directional antenna systems. Every aspect of this rotator was designed for high-strength, ease of installation, serviceability and longevity. This rotator is extremely capable and worry-free for tower mast mounted directional antennas. The RT4500HD Heavy-Duty Rotator has capabilities that rival most rotators available on the Amateur Radio market. With an impressive list of features and benefits, it is noteworthy that this rotator does not have mechanical limit switches. Soft rotation limits are set in the optional controller to match the limits of the installed antenna cables. If the antenna or the mast ever slips, simply reset the controller to the new center of rotation and recalibrate the rotational range. Climbing or antenna mast repositioning is not immediately required. The part number DXE-RT4500HD is the stand-alone rotator unit only, which does not include a Top Mast Clamp. This allows for the selection of one of two different size Rotator Top HD Mast Clamps available, both also sold separately, that matches popular mast outside diameters (OD); DXE-RTMC-2 for 2-inch OD mast and DXE-RTMC-3 for 3-inch OD mast. Similar part numbers with added suffixes represent combinations that include the DX Engineering RT4500HD Heavy-Duty Rotator with either the 2-inch or the 3-inch Rotator Top HD Mast Clamp. Other part numbers include either the DXE-RT-21DXE Digital Rotator Controller or the microHAM ARCO Advanced Rotator Controller. Rotator control cables and cable assemblies are sold separately. Features and benefits of the extremely durable RT4500HD Heavy-Duty Rotator: • Superior Rotational Torque > 4,400 in. lbs. with high ratio worm gear drive powered by an extra heavy-duty 24VDC motor • Exceptional Braking Torque >18,500 in. lbs. by high ratio gear reduction that prevents rotation of the mast mounted antenna system due to wind • Very high Vertical Load Capacity — internal needle thrust bearing handles up to 2,000 lbs. • High-compression Heavy-Duty Top Mount Mast Clamps are available for 2-inch OD or 3-inch OD masts • Precision Movement — accuracy within +/-0.1 degrees with high resolution pulse counter • Easy Maintenance — access panel allows service of pulse counter switch without removing the rotator from the tower • Built for Longer Life — hardened steel gears welded onto shafts prevent slippage and shearing of key pins; larger main gear provides increased strength • Weather-Protected — sloped body sheds water; seals at the output shaft, the intermediate plate and the access panel keep moisture out; weep holes make sure it stays dry • Worry-Free Installation — standard four-bolt mount (same as Hy-Gain T2X/HAM); this triangular-shaped rotator fits inside ROHN 25G and Amerite 25 towers and on Accessory Shelves (rotor plates), including the DXE-AS25G and DXE-AS-455G. However, the RT4500HD easily handles antenna systems larger than the 25G will safely handle. Rohn 45G, 55G and up, Amerite 45 and 55, and many other high strength towers are recommended • Works with High-Quality Accessories — Optional DX Engineering DXE-RT-21DXE Digital Rotator Controller, or the microHAM ARCO Advanced Rotator Controller or other 24VDC Pulse Counting Programmable Controller. Install the rotator that provides the most accurate and dependable operations – the DX Engineering RT4500HD Heavy-Duty Rotator.
( 4 )
$2,469.99
—
$2,569.99
DX Engineering NCC-2 Receive Antenna Phasing Systems
Imagine adjusting the controls to knock out strong interfering stations or noise—and then being able to copy and log that weak DX station. By successfully combining the right antennas with the advanced phasing capabilities of the NCC-2, this is the operating thrill that every radio enthusiast can enjoy, again and again! DX Engineering NCC-2 Receive Antenna Phasing Systems are variable phasing controllers that combine the 300 kHz- 30MHz received signals from one transmit antenna and one receive antenna, or from two dedicated receive antennas. Combining signals from two stationary antennas physically spaced 1/10 to 1/2 wavelength apart creates an array pattern with signal peaks and dips called nulls. Adjusting the NCC-2 Phase and Balance controls have the effect of electronically rotating or steering that pattern. Steering the null direction to significantly weaken a local or distant interfering signal or noise is known as "Noise Cancelling." This "Noise Cancelling Controller" (NCC-2) can dramatically enhance the reception of weak signals from non-null directions. This "reverse-beam" capability on radio frequencies AM Broadcast through HF can provide amazing benefits for many types of AM DX and SWL receiving and ham radio operating. Work new DX, hear the weak station in casual regional conversations, snag the rare multiplier in contests and hear beyond the noise and interference in dire circumstances. DX Engineering NCC-2 Phasing Systems now feature the built-in RTR Receive-Transmit Interface relay system that expands the exciting benefits of antenna phasing for interference reduction in two ways: * First, the NCC-2 can combine signals from the HF transmit antenna and a separate receive antenna to effectively notch-out strong stations or noise. Almost any Amateur can now enjoy the benefits of antenna phasing and noise-nulling, even those with space limitations for separating the receiving and transmitting antennas. * Second, the user of any standard HF transceiver that lacks a separate receive antenna input can have enhanced reception of noise and signal nulling with the DXE-NCC-2 and two antennas. Rear panel SO-239, F and BNC connectors make the NCC-2 extremely versatile and easy to connect to almost any receiver or HF transceiver up to 200 watts. Redesigned with plug-in modular circuit board sockets, the NCC-2 includes one switched and powered internal slot and two passive internal slots per channel to accommodate these new options: * DXE-RPA-2-PM Receive Preamplifier Plug-In Modules (powered): one per channel for low-signal passive antennas with poor ground conditions * DXE-RG5000HD-PM Receiver Guard 5000HD Plug-In Module (passive): Front-end protection for the NCC-2 and the receiver * DXE-IT-PM 75 to 50 ohm Impedance Transformer Plug-In Module (passive): to match 75 ohm RX ANT feedlines to NCC-2 50 ohm internal impedance * NCC-2 Receive Filter Sets (passive, non-switchable): High Pass, Band Pass and Low Pass Filters for 160, 80, 40 meters typically in stock, with other band filters available individually by special order. DX Engineering NCC-2 Receive Antenna Phasing Systems offer these new additional benefits: * Multi-Color Status Indicating LEDs for Power, RTR Mode and Preamp Power CH A and CH B * New Radio Key Line Input with RX Enable Output-RTR Failsafe to prevent RF damage to NCC-2 and RX equipment * New ACC Key Line Output RCA female 'ground on transmit' pass-through for Amplifier or Accessory * New screw-on 2.1mm DC connector to prevent accidental power cable pull-out * Operates on +13.8VDC @ 2A input to power the NCC-2 and internally jumper set Bias Tee on each RX ANT ports for coax fed Active Verticals and other accessories. Offering new and experienced radio enthusiasts the next level of reception enhancements, DX Engineering model NCC-2 Receive Antenna Phasing Systems in use around the world!
( 19 )
$955.99
DX Engineering Receiver Guard Electronic RF Limiters
DX Engineering Receiver Guard RG5000HD Electronic RF Limiters are the best choice of inline devices to protect your receiver antenna inputs. The Receiver Guard is a receive antenna input limiter specifically designed to protect a sensitive receiver front-end against high levels of RF and potential damage. At the heart of each Receiver Guard is a highly effective electronic RF limiter covering 500 kHz to 150 MHz with an insertion loss under 0.15 dB up to 50 MHz and under 0.30 dB up to 150 MHz. The multi-stage design includes a gas discharge tube for maximum pulse energy protection. The DXE-RG5000HD rejects 10 watts of catastrophic receive antenna feedline RF while passing a maximum signal of about 87 dB over S-9, which is only 25 mw, a signal level that is well below the point of front end damage. Receiver Guards are a must for multiple radio contesting stations and they provide low-cost front-end "insurance." Use them in these common high-RF situations: - Receive antennas in very close proximity to transmit antennas - Field-day operations with many transmitters in close range - Multi-transmitter contesting sites - Neighboring Amateur and CB operators - Frequent high-power mobile encounters Extensively tested and proven in real-world stations, the Receiver Guard works for all radios and offers the ultimate performance required by the upper tier of transceivers tested to have the best narrow-spaced third-order dynamic range or published RMDR (Reciprocal Mixing Dynamic Range). These are passive electronic limiters, so competitive contesting stations use separate band filters in addition to the Receiver Guard. When there are high levels of RF on your receive antennas, the DX Engineering Receiver Guard generates far less harmonic noise than other limiters on the market, which allows your station to continue to operate safely and competitively. At normal HF signal levels the RG5000HD operates continuously with no effect on the performance of your station while providing the best possible protection for your radio. Here are key Receiver Guard features: * Keeps stray high levels of RF from damaging your receiver input * Ideal for separate 160 and/or 80 meter receive systems with large pulse and RF energy capture area * Uses state of the art components for maximum protection of receivers * Under 6 ns response time * Multi-Stage protection * Very low insertion loss * Uses BNC type connectors to avoid accidental connection to a transmit feedline * Has been developed and tested in world-recognized multi-multi contest station K3LR Specifications - DX Engineering Receiver Guard model DXE-RG-5000HD - Frequency Range: 0.5 through 150 MHz - Insertion Loss: < 0.15 dB up to 50 MHz, < 0.3 dB 50 MHz up to 150 MHz - VSWR: < 1.2:1 - Maximum Output Level at 10 W input: +14 dBm (0.025 W) - Maximum Power Handling: 10 W CCS (Continuous Commercial Service) - Device Impedance: 50 to 75 ohms, unbalanced - Connectors, Input and Output: BNC female Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. What happens if the receive antenna is extremely close to the transmit antenna, or there is an antenna support or other system failure that causes a high RF level to enter the receive antenna input? A DX Engineering Receiver Guard can save the day! Order yours now.
( 37 )
$119.99
DX Engineering Receive Short Element Active Vertical Antennas
DX Engineering Receive Short Element Active Vertical Antennas (the RSEAV Antennas) offer excellent low noise radio frequency reception from 40 kHz to 30 MHz. Better receiving performance than full-size transmit antennas and other active makes the DXE-RSEAV-1 the best choice on the market for VLF through HF reception, including long-distance AM broadcast, Medium Wave and Shortwave (SWL), and new low-frequency Amateur bands, DXing, contesting, and everyday HF operations. Click on a listed product title and Scroll Down to see additional important information. A complete product description appears below the Specifications Overview. Instruction manual links appear in the Documentation section. The sleek and stealthy DXE-RSEAV-1 includes a high-quality three-section 8.5 ft. (2.6m) aluminum tubing whip, insulated mounting plate and the completely new DXE-AVA-3 Active Matching Unit. Its state-of-the-art broadband operational amplifier design works as a high-impedance buffer between the short antenna element and RG6U 75-ohm coax. When installed in the appropriate location, RSEAV antennas provide significantly better weak signal reception than other active receive antennas and full-size transmit-capable antennas, with substantially reduced noise and lower spurious signal interference. Receive Short Element Active Vertical Antennas are intended to be mounted on a ground rod at ground level in a clear area away from all metal, towers and other antennas. They are sold individually (DXE-RSEAV-1), or with a bias tee (DXE-RSEAV-1FVI) and DXE-RSEAV-1 Receive Short Element Active Verticals set a new standard for "Active Receive Vertical Antennas" replacing legacy DXE-ARAV-3, ARAV-2, ARAV-1 and AL-24 versions. Use multiple DXE-RSEAV-1 for all 4 and 8 element DX Engineering Receive Arrays – all 3, 4 and 8 element Hi-Z Antennas Arrays – and 2 element receive arrays with DXE-NCC-2 and NCC-1 Variable Phasing Controllers. The DXE-RSEAV-1 is designed to be a very low-gain, low-noise antenna for greatly improved signal-to-noise performance over a very wide range of frequencies. In a proper single or multi-element array installation, this Receive Vertical antenna will attenuate high-angle skywave signals, which is the goal for a low band DXing receive antenna. Low-angle, long-range DX signals are easier to copy with a good radio and DX Engineering Receive Short Element Active Vertical Antennas. Please Note: To achieve the expected reception pattern, multi-element phased arrays depend upon identical gain and phase response from each element. Every individual element amplifier, its grounding, and even its feedline characteristics and length, must be identical to the others in the array. Therefore, when unrepairable failures occur, it is essential to replace or upgrade all the elements in the array with identical, fully compatible DXE-RSEAV-1 antennas or DXE-AVA-3 units.
( 3 )
$249.99
—
$1,999.92
DX Engineering Pre-Assembled Radial Wire Kits
DX Engineering Pre-Assembled Radial Wire Kits have 1/4 in. ring terminals that are CRIMPED and SOLDERED onto one end of high quality 14-gauge stranded copper wire with UV black soft PVC insulation. They make the installation of your ground radial system fast and easy. The stranded wire and soft insulation means that the wire will lay flat as you place it on the ground for a simple, no-tangle installation and convenient attachment to your DX Engineering Radial Plate, model DXE-RADP-3. These radial wire kits are designed for users of vertical antenna systems that have the need for a high quality radial system for optimum antenna performance. These kits feature: * 20 radial wires of the same length in each package * 20-packs are offered in three lengths; 20 ft. (-20RT), 32 ft. (-32RT) and 65 ft. (-65RT) * 10-packs of 120 ft. radials for 160 meter verticals also available (-120RT) * 14 AWG, stranded copper wire * UV resistant black soft PVC insulation * 1/4 in. ring terminals are machine crimped and hand soldered onto each radial wire Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. An effective and efficient system of many radials dramatically improves vertical antenna performance. Give your vertical a boost with DX Engineering Pre-Assembled Radial Wire Kits!
( 29 )
$229.99
—
$425.99
DX Engineering RT4500HD Rotator/2 Inch HD Mast Clamp and Controller Packages
DX Engineering RT4500HD Rotator/2 Inch HD Mast Clamp and Controller Packages conveniently combine DX Engineering's RT4500HD Rotator with a DXE-RTMC-2A Rotator Top HD Mast Clamp and your choice of either a DXE-RT-21DXE Digital Rotator Controller or microHAM ARCO Advanced Rotator Controller. * Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information * Important Note regarding DX Engineering Protection Plans and Kit Combo Contents NOTE: Protection plans cannot be purchased for combination packages or on applicable devices after shipment. DX Engineering Combination Kits and Packages are designed to help you easily visualize and order the right items for your specific needs. However, we encourage you to contact our experienced Technical Sales Team for assistance. We can help adjust the kit contents, suggest substitutions based on stock availability, and offer DXE Protection Plans for radios and devices when applicable. Contact us for Expert assistance and make informed purchasing decisions with our guidance.
Not Yet Reviewed
$3,534.97
—
$4,209.97
DX Engineering MBVE-5A Series SAF-T-TILT™ HF Multi-Band Vertical Antennas
DX Engineering MBVE-5A Series SAF-T-TILT™ HF Multi-Band Vertical Antennas are 43 ft. tall, high performance, 160 through 10 meter vertical antennas - designed from the ground up to offer ease of use, reliability and performance! New design and materials technology are used throughout. The patented* and massive SAF-T-TILT™ 3/8 in. thick rugged aluminum base allows easy, safe tilt action without the unsafe removal of mounting hardware -- as with some competitors' antennas! Now - using our ground-mounted vertical, you'll work DX as you never could with a low horizontal-dipole antenna! DX Engineering MBVE-5A Series SAF-T-TILT™ HF Multi-Band Vertical Antennas require a special DX Engineering DXE-UN-43 UNUN with 150 ft. of RG-213 coax feed and your wide-range tuner - OR a automatic tuner at the base of the antenna without the UNUN.. These MBVE-5A verticals feature: * High strength Delrin® thermoplastic insulator that won't crack, splinter, peel or fail from exposure * Rugged structural grade type 6063-T832 drawn aluminum tubing radiator - the best alloy for high-strength, long-lasting antenna applications * New, massive, patented* SAF-T-TILT™ base allows safe raising and lowering of antenna without removal of fastening hardware * The fast taper antenna element provides the lowest wind resistance * Free-standing to 92 mph wind speeds * All Stainless Steel hardware - very durable and attractive MBVE-5A verticals include the antenna element, mounting plate with insulator, exclusive Patent Pending SAF-T-TILT™ Base, stainless steel hardware and clamps. Like any HF vertical, MBVE-5A verticals require a good ground radial system. 32 radials, 65 feet long are recommended. Fewer or shorter radials will work, but with some diminished results. For proper installation, additional materials are needed, but not supplied. You will need: * Mounting pipe--steel pipe that has 2.0 in. O.D. with 0.25 in. wall thickness, 4 ft. long -- standard 1-1/2 in. galvanized water pipe (with its 1.9 in. OD) is fine * Quick-Set or other concrete for mounting pipe installation * Radial wire and wire lugs--must use 14-gauge, stranded copper wire with PVC insulation. A minimum of 20 radials, each 32 feet long, should be used. * Penetrox A -- to ensure good connection between aluminum hardware and in-between aluminum tubing sections * Anti-seize compound, which should be used on the threads of all the stainless steel hardware to prevent galling Consider these new, cost-effective DX Engineering MBVE-5A Series SAF-T-TILT™ HF Multi-Band Vertical Antennas and packages now available for your application: -- DXE-MBVE-5A 43 Ft. Antenna only -- DXE-MBVE-5A-4P Antenna Package with Radial Plate -- DXE-MBVE-5A-4UP Antenna Package with UN-43 UNUN -- DXE-MBVE-5A-4UPR Antenna Package with Radial Plate and UNUN Packages with Radial Plates include two extra hardware kits for a total of 60 possible radial wire connections. Packages that include the UNUN also include the UNUN mounting bracket. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. *US Patents D654,063 and D654,064 DX Engineering MBVE-5A Series SAF-T-TILT™ HF Multi-Band Vertical Antennas are high-performance verticals and antenna packages that allow you to access all HF bands with only one antenna solution. Order one of these premium-quality all-band HF verticals from DX Engineering and roam HF… freely!
( 9 )
$601.98
—
$989.61
DX Engineering MBVE-5A/AE Series SAF-T-TILT™ Vertical Antenna Components
DX Engineering MBVE-5A and MBVE-5AE Vertical Antenna Components are the specialized parts for these SAF-T-TILT™ antenna systems. Top tubing sets include hardware are used on both standard and extended base versions. Standard and extended base tubing and insulators use separate hardware sets included in antenna packages or sold separately. These components are original parts, which are also available here as replacements. These are genuine DX Engineering SAF-T-TILT™ Vertical Antenna Components.
( 7 )
$101.99
—
$499.99
DX Engineering XB-5 Hexx Beam HF Antenna
The DX Engineering XB-5 Hexx Beam is a lightweight directional five-band HF antenna for the 20, 17, 15, 12 and 10 Meter bands that is ideal for permanent or temporary installations. What are the benefits of this oddly shaped HF beam antenna? There are many, such as its small turning radius and full legal-limit power handling on all bands. But the most important are that the XB-5 Hexx Beam receives signals very well and transmits RF very efficiently. Its special configuration of full-size wire elements reject noise so more signals are heard. Months of development have culminated in this advanced antenna design for easier assembly, improved SWR and better bandwidth while maintaining excellent front-to-back performance. The DX Engineering XB-5 is our best Hexx Beam to date. DXE-XB-5 is the complete HF antenna package of specialized DX Engineering XB-5 Hexx Beam components; some are new and pre-assembled. These essential components include the patented* Hexx Hub and the Stainless Steel and PTFE Rigid Flat Feeder which is fully balanced with the Maxi-Core® 20 1:1 Current Balun and Mount. Also included are the all-new Heavy-Duty "Ice" Spreader Support Ropes with thimbles and stainless steel carabiners, better fiberglass Center Post and Spreaders, the Heavy-Duty Mast Mount, newly configured Element Wire Kits with the unique DX Engineering Wire Guides and innovative Element Spacer Insulators. The DX Engineering XB-5 Hexx Beam design has a number of important advantages over other Hex Beams or a mini-Yagi: - New, easy and faster assembly - fewer parts to speed completion of the antenna project - Pre-made 4.4 mm heavy duty "ice" support ropes with thimbles and stainless steel carabiners - High CMI Balun (1:1 5kW) and Mounting Bracket included - New Heavy-duty Mast Plate with DXE Saddle Clamps - Strong fiberglass without slits - Pre-sized and pre-drilled element spacer insulators designed for simple antenna assembly and tuning adjustment - Improved SWR band coverage - Small turning radius - the XB-5 Hexx Beam has a turning radius of 11' - Gain - 5 dBi (3 dBd), depending on band - similar to 2 element Yagi, far exceeding the performance of multi-band mini-beams - Front-to-Back – greater than 20 dB, depending on band - Wind balanced - Hexx symmetry reduces torque on the rotator - Light weight – about 25 lbs. fully assembled - Wind load – only 5 square feet wind surface - Can be turned with a light duty rotator - Performs well at low heights - good results at 25 to 35 feet above ground - Handles full legal limit power – no power restriction as on competing antennas - Low Noise results - approaches performance of closed loop antennas - Full length HF antenna elements - no lossy coils or traps - Five-Band Stainless Steel/PTFE Rigid Feeder System – balanced for best pattern - Requires no matching network - direct single 50 ohm coax feed The DX Engineering XB-5 Hexx Beam is one of the best performance values on the market for a directional HF antenna. *(US Patent No. 8,669,911, US Patent No. D 624,060, British Patent No. GB248003 B)
( 3 )
$1,247.92
DX Engineering® OMNI-TILT® Vertical Antenna Tilt Bases
DX Engineering® OMNI-TILT® Vertical Antenna Tilt Bases are a completely new design that incorporates features that make this Tilt Base a 'must-have' for all types of vertical antennas. The OMNI-TILT® is patterned on the same proven safe technology as the patented DX Engineering® SAF-T-TILT® and the patented DXE-TB-3P Tilt Bases, that are designed to prevent the antenna from falling when the fasteners are loosened. The user simply lifts the OMNI-TILT® base plate and this positive action disengages the bolts from the top slot, which allows the user to easily and safely walk the ground-mounted antenna up or down for tuning, maintenance, stealth antenna stowing, or in the event extreme weather is on the way. Order one of these OMNI-TILT® models for your vertical antenna system: DXE-OMNITILT-1P for Hustler BTV Series and Hy-Gain AVQ Series Trap Vertical Antennas--Both antenna types use the supplied DXE-TVA-HWK Trap Vertical Mounting Hardware kit. DXE-OMNITILT-2P for Elevated Mount Verticals, include Cushcraft R8, R9, Hy-Gain AV-640, MFJ, GAP and many other antennas for HF and VHF – DXE-OTMC-250P Clamps (2) are included for customer-supplied upper antenna support tubing or pipe of 1.25 to 2.50 in. OD. NOTE: Both models REQUIRE two (2) optional DXE-OTMC-250P clamps to attach the non-tilt part of OMNI-TILT® to a user-supplied lower Mast Pipe of 1 1/4 to 2 1/2 in. O.D. The ability to attach this tilt base and your antenna to a pipe from 1 1/4 up to 2 1/2 in. is an important new feature of the OMNI-TILT®. Alternatively, all OMNI-TILT® models may be mounted on a 4 x 4 in. or larger wooden post with user-supplied attachment hardware; typically lag screws. This is why the DXE-OTMC-250P clamps for the non-tilt portion are NOT SUPPLIED, as they would be unused with wood-post installation and at added expense. DX Engineering® OMNI-TILT® bases are custom made from laser cut 1/8 in. thick Stainless Steel for strength and durability. All of the hardware used in the OMNI-TILT® Base is Stainless Steel to ensure long and dependable service. The DX Engineering® OMNI-TILT® is a 2-piece assembly of stainless steel U-shaped plates. As noted above, the OMNI-TILT® rear plate is typically mounted to your 1.25 in. to 2.50 in. steel pipe using the optional DXE-OTMC-250P Mounting Clamps, purchased separately for either model. The OMNI-TILT® front plate pivots on a pair of high-strength bolts. Both plates have extra holes to allow a wide range of optional mounting hardware to maximize the use of the OMNI-TILT® for many types of vertical antennas. For example, on both models OMNITILT -1P or -2P, the rear plate may be mounted with your hardware to a wood post, and the front plate accommodates other types of clamps for other antennas. DX Engineering® offers optional Tilt Base Wing Nut Knobs - DXE-AOK-OT1194 - that will allow for quick release of the DX Engineering® DXE-OMNI-TILT® base top bolts, without tools! Note: Whenever the DX Engineering® "Documentation" tab is available, please look at the associated files for additional product information. Once again, DX Engineering® innovation produces a great, multi-purpose system for mounting and accessing an HF, VHF or UHF antenna. With OMNI-TILT®, there is no need to ask for help because you will be able to walk your own antennas up and down. These tilt bases are perfect for stealth antennas, or if you are concerned about the weather, or for making antenna adjustments. Put the convenience of DX Engineering® OMNI-TILT® Vertical Antenna Tilt Bases under your antennas!
( 76 )
$105.98
—
$163.97
DX Engineering RR8B-HP Remote Antenna Switches
DX Engineering RR8B-HP Remote Antenna Switches are RF switches designed to have excellent performance on HF through 6 meters. Using 16 custom, sealed, moisture-resistant relays, these Remote Switches provide the best port-to-port isolation available with reliable, long-term performance. RR8B-HP switches may be used as conventional one-of-eight antenna switches or configured to simultaneously select multiple output ports, thereby allowing their use in complex antenna phasing and stacking systems. DX Engineering RR8B-HP switches use a removable screw-terminal control cable plug that greatly simplifies installation by eliminating the need for disassembly or soldering to wire the control lines. These remote relay boxes are custom-made on a revised stainless steel chassis with integral mounting-bracket flange and include a special RF-shielded high-impact thermoplastic cover. There is also a custom conductive gasket to complete the seal between the cover and stainless steel housing base. A DX Engineering V-Bolt Saddle Clamp is included to mount the RR8B-HP on any tower leg or pipe sized from 1 to 2 in. O.D. Features of the RR8B-HP Remote Antenna Switches include: * Fully RF shielded with stainless steel mounting bracket and hardware * Best port-to-port isolation available: Over 70 dB isolation below 30 MHz, Over 55 dB isolation below 60 MHz * Loss: Less than 0.1 dB below 60 MHz * High-RF tolerant, Amphenol UHF female, SO-239 connectors * Shorted or open selection of unused antenna ports * Sealed 20 ampere, RF-rated relays * Safe 12V DC relay operation * Lightning protection on control lines * External quick-connect plug for control lines * Reliable operation in extreme-weather conditions Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. For reliable operation of multiple antennas through the operation of remote switching, order DX Engineering RR8B-HP Remote Antenna Switches to do the job!
( 5 )
$549.99
DX Engineering RPA-2 Modular Receive Preamplifiers
DX Engineering RPA-2 Modular Receive Preamplifiers are newly designed versions of the RPA-1 with internal slots for accessory modules. They accommodate the addition of the one optional plug-in module, such as the 75 to 50 ohm Impedance Transformer Module, or the Receiver Guard 5000HD Plug-In Module, or the DX Engineering Clifton Laboratories Z10020 AM Band Filter Module. DXE-RPA-2 preamps have very low internal noise and are optimized for the 300 kHz to 35 MHz range. They help you hear the weakest signals without artificially raising the noise. Meticulous craftsmanship and durable, robust components allow these preamplifiers to withstand high signal levels while providing superior dynamic range and third-order intercept performance that equals or exceeds most receiver and transceiver front-ends. RPA-2 Receive Preamplifiers have key features added, as requested by our tech-oriented customers and enthusiasts: - Internal slot accommodates the optional 75 to 50 ohm Impedance Transformer Module to accomplish typical receive antenna feedline to equipment transitions without losses -Also allows direct connection to 50 ohm receive antenna feedline BNC connectors with no transformer required - Internal slot for DXE-RG5000HD-PM Receiver Guard 5000HD Plug-In Module – Front-end protection for the RPA-2 - Secure BNC female connectors and receive-system friendly F female connectors remain; both prevent accidental connection to transmitting devices with UHF connectors - A green LED indicates when DC power is present and the preamplifier circuit is engaged. - An ingenious positive-capture threaded-sleeve 2.1 mm power connector that ensures the DC power cannot be accidentally disconnected from the RPA-2. - Alternatively, a simple internal jumper change allows the RPA-2 to be powered by DC on the feedline While many other common preamplifiers suffer from harmonic distortion, RPA-2 Modular Receive Preamplifiers include our exclusive, advanced push-pull design that eliminates harmonic distortion. Their high quiescent current increases their ability to handle strong signals without distortion or overload. These high performance devices must be powered with a well filtered and regulated DC power supply and will offer maximum performance at 12 to 18 Vdc input. Please do not use a cheap wall transformer or noisy switching wall-wart to power these top-of-the-line preamplifiers. Indoor installation at the back of the radio is recommended for RPA-2. For those who want to place them in an enclosure at a receive antenna system, a handy internal jumper allows these new units to be powered on the coaxial cable. RPA-2 Receive Preamplifier Specifications: -Input and Output Connectors, female: BNC and F -Frequency Range: 300 kHz to 35 MHz -Gain: 16 dB, +/- 1.5 dB (over entire frequency range) -Output Third Order Intercept: 43 dBm -Noise Figure: 3.5 dB -One dB Compression Point: +26 dBm (400 mW output) -Dynamic Range, IM3: 110 dB or greater (500 Hz bandwidth) -Power Requirement: 12-18 Vdc, 140 mA max. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering RPA-2 Modular Receive Preamplifiers offer superior receiving results on crowded medium wave and shortwave bands as well as on the ham bands. SWLs and Radio Amateurs around the world have come to rely on the advanced operational performance of DX Engineering Receive Preamplifiers. You will be able to pull in the weakest signals and snag that rare one, under the most difficult conditions, when you need it the most. Order your DX Engineering RPA-2 today!
( 14 )
$269.99
DX Engineering Direct Coax Feed Add-On Kits
DX Engineering Direct Coax Feed Add-On Kits are designed for the Hustler BTV Series of antennas. They allow for a direct connection with a coaxial cable PL-259 (UHF male) connector. Manufactured from heavy-duty stainless steel, these add-on kits allow for a convenient connection from your coaxial cable feed line directly to the base of the Hustler BTV series vertical antennas by adding a mounted SO-239 (UHF female). They may be positioned in any one of three different directions to accommodate a straight-in or sideways connection from your feed line. If you are looking for a professional and reliable installation, then order a low power or high power (low loss) coaxial jumper cable for connecting your radial plate with a bulkhead connector. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering Direct Coax Feed Add-On Kits include a laser-cut stainless steel bracket, high quality SO-239 with PTFE insulation, and stainless steel hardware. Order one for your BTV vertical!
( 79 )
$42.99
DX Engineering Tilt Base Antenna Mounting Systems
The patented* DX Engineering Tilt Base Antenna Mounting Systems enable an operator to raise or lower an antenna in seconds, while leaving the base of the antenna securely attached to the mounting plate and post. DX Engineering Tilt Bases make it easy to tune your vertical, repair, or simply lower your antenna to a safe horizontal position long before bad weather hits. One person can install, raise and lower, and service their vertical antenna with our stainless steel Tilt Base; just walk it up or down. The Tilt Base prevents potential accidents when climbing a step ladder to tune the antenna, especially on soft ground. This is an essential tool that has helped countless hams eliminate the possibility of personal injury and damage to their ground-mounted vertical antenna. There is no need to remove brackets from the support posts and you will never again have to lift the entire weight of the antenna in order to tilt it down or tilt it up. Nearly two decades of customer comments about DX Engineering Tilt Bases (and the Radial Plate) have included "it's a work of mechanical art" and another exclaimed "...it's so gorgeous I don't want to mount it outside, I want to hang it on the wall!" Year after year, users are thankful for the amazing ease of the Lift, Slide and Tilt action of this antenna mount for making antenna adjustments simple. Recently, DX Engineering customer Michael, KO4VVH, said "I wondered why this bracket had a cost over $60, but when it arrived today I was blown away. Heavy duty doesn't do this beast justice. Heavy plate stainless steel and it is one of the best mounts I've ever owned. It's big and heavy... Ultra heavy duty. I will mount it up to my Hustler 5BTV HF antenna so I can drop it to ground level for maintenance, adjustments and SWR tweaks. Thank you!" Precision-cut from 3/16 in. 304 stainless steel, these Tilt Base Antenna Mounts are virtually indestructible. They conveniently mount to the same ground pipe or tubing that you use for the antenna and Radial Plate. You could use lag screws or carriage bolts to mount the Tilt Base and the Radial Plate to a wood post, but typically they are securely mounted to a 2 in. max. OD pipe using optional SSVC-2P saddle clamps, displayed in "Required Parts". There are five versions of the DX Engineering Tilt Base Antenna Mounting Systems kit designed for a variety of HF antenna types: DXE-TB-3P: Specifically designed with included stainless steel hardware to mate with the antenna mounting bracket of the Hustler 4, 5 or 6 BTV vertical antennas. DXE-TB-4P: This Tilt Base model provides a mounting plate and clamps for tilting a customer supplied antenna support mast up to 1.75 in. OD and 10 ft. tall, for mounting elevated no-radial vertical antennas that weigh less than or equal to 20 pounds, and have a height of no more than 28 ft. The Vertical antennas and mast assemblies must be adequately guyed. Precautions must be taken when raising or lowering to avoid undue lateral stress on the tilt mechanism. The TB-4P is the tilt option for legacy DX Engineering vertical antenna models DXE-30VE-1, DXE-40-VE-1 and DXE-40VA-1. See the DXE-TB-7P below for the replacement COM-30VA and COM-40VA Monoband Vertical Antennas. DXE-TB-6P: Is specifically designed to mate to the antenna mounting bracket of the Hy-Gain AV-14AVQ (HGN-AV-14AVQ). This special tilt base mounting system includes stainless steel hardware that allows the AV-14AVQ to be closer to ground level for maximum performance. DXE-TB-7P: Is specifically designed to mate to the COMTEK 30 Meter (COM-30VA) and 40 Meter (COM-40VA) Vertical Antennas. DXE-TB-8P: Is specifically designed to mate to the COMTEK 20 Meter Vertical Antennas (COM-20VA) which may be tuned to resonate on one band, 20, 17, 15, 12, or 10 meters. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. *U.S. Patent 7,432,875
( 59 )
$83.99
—
$163.98
DX Engineering 6BTV 6-Band High Performance HF Vertical Antennas and OMNI-TILT® Mounting Systems
DX Engineering 6BTV 6-Band High Performance HF Vertical Antennas and OMNI-TILT® Mounting Systems are convenient and economical antenna installation packages that combine the time-tested Hustler antenna with our radial plate and our innovative tilt system! This can be your high performance HF ground mounted vertical antenna system. This DX Engineering Hustler 6BTV Package provides 80, 40, 30, 20, 15, and 10 meter band operation with: -- Dramatically improved transmit and receive signals -- Best possible signal pattern and performance boost with organized radial wire attachment system -- Simplified and long-lasting RF connections with proper connectors and cable -- Safe and easy tuning with our OMNI-TILT® mount - one person can walk the antenna up or down -- Professional grade stainless steel clamps and mounting hardware Included with each antenna package is our exclusive High Performance Hustler BTV Assembly and Installation Guide that will answer all your questions! You can read more right here, including the best way to install your vertical antenna system, the reasons for installing a radial system, and how to "Install Radial Wires Without Digging". Click "More Detail" below and then click the "Documentation" link. "More Details" includes the list of items included in this fantastic package. Make contacts beyond expectations! Operate with a versatile HF multi-band vertical antenna that performs to its full potential. Install a DX Engineering 6BTV 6-Band High Performance HF Vertical Antenna and OMNI-TILT® Mounting System.
( 4 )
$889.68
DX Engineering Rotator Top HD Mast Clamps
DX Engineering Rotator Top HD Mast Clamps significantly improve the connection between the rotator and the mast. The mast gripping pressure of these clamps is completely adjustable, by limiting the torque applied to the included clamping fasteners. Available in two sizes, for 2 inch OD and 3 inch OD masts, based on the K7NV design, these are the heavy-duty original equipment mast clamps for the DX Engineering RT4500HD Rotator. The 2 inch OD HD Mast Clamp is also a heavy-duty replacement for M2 Antennas OR2800 Positioners and Yaesu G2800-DXA, G1000-DXA, and G800-DXA Rotators. The 3 inch OD HD Mast Clamp version fits only the DXE-RT4500HD and M2 OR2800. NOTE: When the mast mounted rotatable antenna(s) installed have a wind load or wind exposure rating of a total of 18 square feet or more, the use of a 3 inch OD mast and mast clamp are highly recommended. Each clamp plate has holes drilled for the applicable rotators. Clamping bolts are included with each. Also, rotator clamp mounting bolts are included for DXE, M2 and Yaesu (2in. clamps only). Replacements are sold separately... see "Replacement Parts" on each mast clamp detail page. Rotator Mast Clamping Hardware Includes: 5/16 1.250 in. Stainless Steel bolts 5/16 Nylon Lock Nuts 5/16 Flat Washers 1/4-20 - Clamp Spreading Bolt(s)
( 3 )
$249.99
—
$339.99
DX Engineering Maxi-Core® High-Power Multi-Band UNUNs
DX Engineering High-Power Multi-Band UNUNs with Maxi-Core® technology allow your antenna to perform to its fullest potential and reduce stress on your equipment. These specially tuned UNUNs, designed for non-resonant vertical antenna applications, operate more efficiently than similar competitive products. Lesser products may burn up easily on lower bands with QRO power levels. DX Engineering high-power UNUNs are specifically designed for applications with 43 ft. non-resonant, multi-band antennas, ensuring the best efficiency from your antenna and transmission line/tuner installation. The results are minimizing the additional transmission line losses caused by abnormally-high SWR. DX Engineering Maxi-Core® High-Power Multi-Band UNUNs can be added to any existing 43 ft. antenna installation or used to replace an older competitive UNUN for a performance increase. The UN-43-R includes mounting bracket and feed-point connections braids. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. All non-resonant vertical antennas present high SWR to their feed lines. Deal with it! Order DX Engineering High-Power Multi-Band UNUNs!
( 13 )
$201.99
DX Engineering RR8B-SD Remote Antenna Switches
DX Engineering RR8B-SD Remote Antenna Switches are the highest power handling antenna switches in the DX Engineering RR8 Series. Think of them as Super Duty. They are designed to switch up to 8 coaxial lines in high-power RF systems. RR8B-SD switches use enclosed RF-rated relays with exceptional RF voltage and current capability to provide reliable, long-term performance. DX Engineering RR8B-SD switches may be used as conventional one-of-eight antenna switches or configured to simultaneously select multiple output ports, allowing for use in complex antenna phasing and stacking systems. RR8B-SD switches use removable screw-terminal control cable plugs that greatly simplify installation by eliminating the need for disassembly or soldering to wire the control lines. These remote relay boxes are custom-made on a revised stainless steel chassis with integral mounting bracket flange, and include a special RF-shielded high-impact thermoplastic cover. There is also a custom conductive gasket to complete the seal between the cover and stainless steel housing base. A DX Engineering V-Bolt Saddle Clamp is included to mount the RR8B-HP on any tower leg or pipe sized from 1 to 2 in. outside diameter. RR8B-SD Remote Antenna Switches feature: * Fully shielded, high impact thermoplastic enclosure, stainless steel mounting bracket, and hardware * Excellent port isolation; greater than 60 dB at 30 MHz, worst case * Power Rating: Greater than 10 kW in normal amateur operation on all modes when using antennas with less than 2:1 SWR on 30 MHz and below. Greater than 5 kW above 30 MHz * High-RF tolerant, Amphenol UHF female, SO-239 connectors * Lightning protection on control lines * Shorted or open selection of unused antenna ports * Custom sealed 30 ampere high-voltage RF relays * Solderless removable plug for easy installation of control line with no disassembly * Safe 12V DC relay operation * Reliable operation in all weather extremes Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. For multi-band multi-antenna QRO operation, there is no better remote switch than DX Engineering RR8B-SD Remote Antenna Switches!
( 4 )
$599.99
DX Engineering Beverage Antenna Systems
DX Engineering Beverage Antenna Systems are single-wire, single-direction beverage feed systems. Their W8JI design makes them immune to the strong signal overload and core saturation common in multi-transmitter contesting environments. They are used by winning contest stations and low-band DXers. They use an isolated-winding matching-transformer system to significantly increase the signal-to-noise ratio in Beverage and other high-impedance antennas. Now RoHS-compliant, they will work with antenna impedances from 400-500 ohms. The termination resistor included is a special 470 ohm, 2 watt, non-inductive resistor that withstands nearby lightning strikes significantly better than hard-to-find carbon composition resistors. Features include: * 100 kHz to 30 MHz operating range * Spark gaps minimize damage from lightning * Wing nut terminals eliminate soldering * Rugged aluminum housing and stainless steel hardware * Flange-mount holes for easy mounting * Ground isolated secondary can be connected with normal or reverse phase Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Beverage antennas have been in use since the 1920s. These DX Engineering Beverage Antenna Systems modernize the Beverage concept for convenience and performance.
( 21 )
$115.99
DX Engineering LPFC-BNC Low Power Feedline Chokes
DX Engineering LPFC-BNC Low Power Feedline Chokes are intended to be placed in line with coaxial cable fed antennas and equipment used for portable operations, including POTA and SOTA activations. The DXE-LPFC-BNC coax wound toroid achieves an amazing common mode impedance (CMI) curve, with an RF choking capability that far exceeds the CMI of 'a-few-beads-on-coax' product that is offered by other suppliers. Actually, these "Low Power" Feedline Chokes can be used in any station that runs less than 250 watts SSB, 100 watts CW or Digital. ________________________________________ DX Engineering Low Power Feedline Chokes features and benefits: - A unique, lightweight form, with clear heat shrink over the choke* - Light enough to hang inline at the feedpoint of any portable HF antenna. - BNC female connectors for easy connection to portable antennas and gear. - Much higher CMI that other portable, low power chokes, especially across the 40 through 6 meter bands. - Frequency range of 1.8 through 54MHz. - RF Power Handling up to 250 watts PEP SSB, 100 watts CW and Digital (at SWR <2:1). - Recommended for general use to isolate either end of a coaxial cable. * Not intended for permanent outdoor use unless mounted inside a weatherproof enclosure. ________________________________________ These chokes are ideal for use at any HF transceiver or receiver antenna connection, portable, mobile or base. In most cases, DXE-LPFC-BNC prevents RFI, stops stray RF and noise on the feedline from getting into the receiver that would cover up weak signals, and improves efficiency of the antenna system. For any station, including POTA and SOTA, mobile and base, DX Engineering Low Power Feedline Chokes keep the RF controlled.
Not Yet Reviewed
$59.99